Report which exit is which, instead of one ambiguous "public IP"

`status` probed https://1.1.1.1/cdn-cgi/trace and printed the answer as
"public IP". In test mode 1.1.1.1 is the *only* address routed into the tunnel,
so that line reported a PIA exit while every other packet left directly — a
test tunnel reading exactly like a full one.

Found on a live container: default route still via eth0, one 1.1.1.1/32 route
through pia0, and the old status line claiming a PIA public IP. This is a
plausible route to concluding the VPN is on when it is not, which is close to
the confusion this skill exists to prevent.

Status now names the mode and, in test mode, prints both exits with the real
address called out. 1.0.0.1 serves the same trace endpoint as 1.1.1.1 and is
never routed into the tunnel, so the direct exit can be probed without DNS.

Verified against all four states: no tunnel, test mode on a live tunnel that
was already up, full tunnel, and after teardown.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

container/skills/pia-vpn/pia-wg.sh

@@ -156,8 +156,17 @@ down() {
   echo "tunnel down"
 }
 
+# Both are Cloudflare and both answer /cdn-cgi/trace over their bare address, so
+# neither needs DNS. Only 1.1.1.1 is ever routed into the tunnel, which is what
+# lets status tell the two exits apart.
+TRACE_TUNNELLED=https://1.1.1.1/cdn-cgi/trace
+TRACE_DIRECT=https://1.0.0.1/cdn-cgi/trace
+
+exit_ip() { curl -s -m 20 "$1" | sed -n 's/^ip=//p'; }
+
 status() {
   wg show "$IFACE" 2>/dev/null | grep -E "latest handshake|transfer" || echo "no tunnel up"
+
   # Resolve a name, not an IP literal. A curl to 1.1.1.1 succeeds while DNS is
   # completely broken, which is exactly how a dead resolver goes unnoticed.
   printf 'DNS: '
@@ -166,8 +175,22 @@ status() {
   else
     echo "BROKEN - cannot resolve api.anthropic.com"
   fi
-  echo -n "public IP: "
-  curl -s -m 20 https://1.1.1.1/cdn-cgi/trace | sed -n 's/^ip=//p'
+
+  # Report the exit per mode. In test mode the probe address is itself the one
+  # thing inside the tunnel, so a single "public IP" line would print a PIA
+  # address while every other packet leaves directly -- the exact reading that
+  # makes a test tunnel look like a full one.
+  if ip route show 0.0.0.0/1 2>/dev/null | grep -q "$IFACE"; then
+    echo "mode: full tunnel"
+    echo "  all traffic exits: $(exit_ip "$TRACE_TUNNELLED")"
+  elif ip link show "$IFACE" >/dev/null 2>&1; then
+    echo "mode: test route only (1.1.1.1 through the tunnel, nothing else)"
+    echo "  through the tunnel: $(exit_ip "$TRACE_TUNNELLED")"
+    echo "  everything else:    $(exit_ip "$TRACE_DIRECT")   <- your real address"
+  else
+    echo "mode: no tunnel"
+    echo "  all traffic exits: $(exit_ip "$TRACE_DIRECT")"
+  fi
 }
 
 case "${1:-}" in