Give the mouse back, retire the follow controls, update Claude per session

Three things the terminal was getting wrong.

**A program that grabs the mouse and dies used to freeze the tab.** A TUI sets
DECSET ?1000/?1002/?1003; if it exits without resetting them, xterm keeps
routing clicks, drags and — under ?1003 — every pointer *move* to the PTY.
Text selection dies and escape bytes flood the prompt. The only exit was
closing the tab. `TerminalView` now reconciles a flag against
`term.modes.mouseTrackingMode` in the `term.write()` callback — the mode only
changes because the container printed a sequence, so one check per write
catches every transition with no polling — and `Ctrl+Shift+X` or a status-bar
button writes the resets back through `term.write`, never `sendInput`: the
reset belongs to xterm's parser, and a still-live TUI told about it would just
re-grab on its next repaint.

The control is in the status bar deliberately. Mouse tracking is the *normal*
state of htop, vim, lazygit and Claude Code, so a badge over the terminal
would be on screen for the whole life of those programs and would swallow
clicks aimed at their own top-right corner. `macOptionClickForcesSelection` is
also on now: xterm's force-select is Shift everywhere except macOS, where it
is Option and is gated behind that option, which defaults to false — so until
now Mac users had no way to select text while a program held the mouse.

**"Following" and "Jump to Current" are gone.** Claude Code draws on the
alternate screen, which has no scrollback, so `viewportY` always equalled
`baseY` and neither control could do anything. They did still work in bash
tabs; xterm's native follow covers that, and the per-write `scrollToBottom()`
went with them because it fought exactly that. What remains, on activate and
after a refit, now samples `viewportY >= baseY` *before* the fit, so opening
the Notes dock no longer yanks a reader to the tail.

**`claude update` runs before every Claude session, not just at container
start.** Containers here stop/start and often just keep running, so a
long-lived one never re-checked. Both copies take the same flock: the
entrypoint prints "container ready" only after its own update finishes, so
opening a tab immediately would otherwise run two updaters against the same
~/.claude/bin, with `|| echo` hiding a half-written install one line before
`exec claude` ran it.

This turns the non-Bedrock path from a bare argv into a `bash -c` wrapper, so
flags and session names are shell-interpolated now and must go through
`shell_quote_arg`.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0145mQi9NZiCDrznBUEEDE4n

CLAUDE.md

@@ -413,6 +413,26 @@ container is created once by a very long function where a dropped capability is
   existing toggle: the label fingerprints *the setting*, not the set of things the setting drives,
   so a project already at `true` gets no recreation at all on upgrade.
 
+### Keeping Claude Code current
+
+`claude update` runs in **two** places, and both are needed:
+
+- `container/entrypoint.sh` runs it once per container start, before any session exists.
+- `commands/terminal_commands.rs` (and its twin in `web_terminal/ws_handler.rs`) prepend it to the
+  command every Claude session launches with, because containers use a stop/start model and a
+  long-lived one would otherwise never re-check.
+
+Both are `timeout`-bounded and `|| echo`'d, so an offline or slow network delays a tab rather than
+failing it, and **both take the same `flock` on `/tmp/.triple-c-claude-update.lock`**. That lock is
+not tidiness: the entrypoint prints "container ready" only after its own update finishes, so
+starting a project and immediately opening a tab — or opening two tabs at once — otherwise runs two
+updaters against the same `~/.claude/bin`, and `|| echo` would hide a half-written install behind a
+friendly message one line before `exec claude` ran it. `-E 0` makes losing the race a success,
+because the holder just did the work. The per-session copy is what forced the non-Bedrock path from a bare `["claude", ...]`
+argv into a `bash -c` wrapper — the flags and the session name are interpolated into a shell
+string now, so **anything added there must go through `shell_quote_arg`**. Bash sessions are
+deliberately untouched.
+
 ### Container Lifecycle
 
 Containers use a **stop/start** model (not create/destroy). Installed packages persist across stops. The `.claude` config dir uses a named Docker volume (`triple-c-claude-config-{projectId}`), nested inside the home volume (`triple-c-home-{projectId}`), so OAuth tokens and Claude Code config survive container stop/start *and* container recreation.

HOW-TO-USE.md

@@ -243,7 +243,7 @@ Anthropic-backend project uses that token without its own login. See
 │             │  │                                                  │  │
 │             │  └──────────────────────────────────────────────────┘  │
 ├─────────────┴────────────────────────────────────────────────────────┤
-│  2 project(s) · 1 running · 2 terminal(s)          Jump to Current ↓ │
+│  2 project(s) · 1 running · 2 terminal(s)                      Notes │
 └──────────────────────────────────────────────────────────────────────┘
 ```
 
@@ -268,8 +268,8 @@ Anthropic-backend project uses that token without its own login. See
 - **Main area** — Shows the active tab: a Project Home view or an xterm.js terminal. With no tabs
   open you get a welcome screen with Docker/image/project readiness checks.
 - **StatusBar** — Counts of total projects, running containers and open terminal sessions; the
-  **Jump to Current ↓** button when a terminal is scrolled up; and the microphone button when
-  speech-to-text is enabled.
+  **🖱 Mouse captured — release** button while a program in the terminal is holding the mouse; the
+  **Notes** toggle; and the microphone button when speech-to-text is enabled.
 
 ---
 
@@ -1224,9 +1224,31 @@ Programs inside the container can copy text to your host clipboard. When a conta
 
 You can paste images from your clipboard into the terminal (Ctrl+V / Cmd+V). The image is uploaded to the container as `/tmp/clipboard_<timestamp>.png` and the file path is injected into the terminal input so Claude Code can reference it. A toast notification confirms the upload.
 
-### Jump to Current
+### Scrolling
 
-When you scroll up in the terminal to review previous output, a **Jump to Current** button appears in the bottom-right corner. Click it to scroll back to the latest output.
+Scrolling is the terminal's own: scroll up to read back and it holds position, scroll to the
+bottom and it follows new output again. There is no follow toggle — an earlier **Following /
+Paused** control and a **Jump to Current** button were retired once they stopped doing anything
+useful, because Claude Code draws its interface on the alternate screen, which has no scrollback
+for them to act on.
+
+### When the mouse stops working
+
+Some programs ask the terminal for the mouse, so that clicks and drags go to the program instead
+of selecting text. If one of them exits without handing the mouse back, the terminal looks stuck:
+you cannot select text, and stray characters can appear as you move the pointer.
+
+A **🖱 Mouse captured — release** button appears in the status bar whenever a program holds the
+mouse. Click it, or press **Ctrl+Shift+X**, to take the mouse back. Nothing is sent into the
+container — only the terminal's own state is reset.
+
+Note that holding the mouse is normal for programs like `htop`, `vim` and Claude Code itself, so
+the button is showing most of the time you are in one. It is there for when a program exits
+without handing the mouse back and the terminal is left stuck; releasing while a program is still
+running just takes the mouse away from that program.
+
+To select text *without* taking the mouse back, hold **Shift** while dragging — or **Option** on
+macOS.
 
 ### Files
 

README.md

@@ -528,7 +528,7 @@ Triple-C includes optional speech-to-text powered by [Faster Whisper](https://gi
 | `app/src/components/layout/TopBar.tsx` | Hosts MainTabs + Docker/Image status indicators + Help |
 | `app/src/components/layout/MainTabs.tsx` | The single main-area tab strip (Project Home + terminal tabs), pointer-event drag reordering |
 | `app/src/components/layout/Sidebar.tsx` | Responsive sidebar (25% width, min 224px, max 320px), collapsible to an icon rail |
-| `app/src/components/layout/StatusBar.tsx` | Project/terminal counts, Jump to Current, STT mic |
+| `app/src/components/layout/StatusBar.tsx` | Project/terminal counts, Notes toggle, STT mic |
 | `app/src/components/projects/ProjectRow.tsx` | Select-only sidebar row; opens Project Home, with hover start/stop and terminal controls |
 | `app/src/components/projects/ProjectList.tsx` | Project list in sidebar |
 | `app/src/components/projects/PermissionModeControl.tsx` | Plan / Default / Accept Edits / Bypass segmented control |

ROADMAP.md

@@ -58,7 +58,7 @@ choice it never asked about.
 
 Also covered: per-project auth backends (Anthropic OAuth, Bedrock incl. SSO refresh,
 Ollama, OpenAI-compatible), user-level `CLAUDE.md` composition, `claude update` on every
-container start, terminal ergonomics (OAuth URL detection, OSC 52 clipboard, image paste,
+container start *and* before every Claude session launches, terminal ergonomics (OAuth URL detection, OSC 52 clipboard, image paste,
 file drag-drop, STT), the web terminal, and workspace backup.
 
 ---

TECHNICAL.md

@@ -62,10 +62,13 @@ Tauri uses a Rust backend paired with a web-based frontend rendered by the OS-na
 Implementation gotchas for the terminal view and its global controls (merged in PR #7, `terminal-layout-statusbar`):
 
 - **xterm padding lives on a wrapper, never the host.** FitAddon measures the same element that `term.open()` mounts into, so any padding on that host element makes the grid overhang and clip its rightmost column / bottom row. Padding must live on a **wrapper `div`**; the xterm host fills it with no padding of its own. Do not reintroduce padding on the host element in `TerminalView.tsx`.
-- **STT mic and "Jump to Current" live in the global `StatusBar`, not per-terminal overlays.** There is a single `useSTT` instance in `App.tsx` bound to the active session. `Ctrl+Shift+M` routes through the Zustand store (`sttToggle`).
+- **The STT mic lives in the global `StatusBar`, not a per-terminal overlay.** There is a single `useSTT` instance in `App.tsx` bound to the active session. `Ctrl+Shift+M` routes through the Zustand store (`sttToggle`).
 - **Recording is pinned to where it started.** The STT transcript targets `recordingSessionIdRef` (the session recording began in), **not** the live active session — switching tabs mid-recording must not misroute the transcript.
-- **"Jump to Current" state is written only by the active terminal.** The active `TerminalView` surfaces `terminalAtBottom` and `scrollActiveToBottom` through the store; only the active terminal writes them, and they are cleared on its unmount.
-- **Set store function values via object-merge, not the updater form** — `set({ fn: value })`, not `set(state => ...)` — when publishing action callbacks (like `scrollActiveToBottom`) into the Zustand store.
+- **Scrolling is left to xterm, and the "Following" / "Jump to Current" controls that used to drive it are gone.** They were built for the normal buffer. Claude Code draws on the *alternate* screen, which has no scrollback, so in a Claude tab `viewportY` always equalled `baseY`, `isAtBottom` was permanently true and neither control could ever do anything — which is what made them look broken. **They did still work in `bash` tabs**, which run `bash -l` on the normal buffer; removing them is a real behaviour change there, and the justification is that xterm's native follow already covers it, not that nothing was lost. The manual `scrollToBottom()` on every write went with them — it fought that native behaviour, which follows the tail while the viewport is at the bottom and holds position while you read further up. `scrollToBottom()` remains only on activate and after a refit, and **both sample `viewportY >= baseY` before the `fit()`** so they re-anchor only a viewport that was already on the tail: the ResizeObserver fires for the Notes dock, the sidebar drag and any window resize, none of which are a reason to yank a reader to the bottom.
+- **A program that grabs the mouse and dies must be escapable without closing the tab.** A TUI sets DECSET `?1000`/`?1002`/`?1003` and, if it exits without resetting them, xterm keeps routing clicks, drags and (under `?1003`) every pointer *move* to the PTY — text selection dies and escape bytes flood the prompt. `TerminalView` reconciles a badge against `term.modes.mouseTrackingMode` **in the `term.write()` callback**: the mode only changes because the container printed a sequence, so one check per write catches every transition with no polling. Releasing writes the resets through `term.write`, **never `sendInput`** — the reset belongs to xterm's parser and must not reach the container, or a still-live TUI would simply re-grab the mouse on its next repaint. Bound to the control and to `Ctrl+Shift+X`, because the failure being recovered from is the pointer not working.
+- **The release control lives in the `StatusBar`, not over the terminal.** Mouse tracking is the *normal* steady state of every mouse-driven TUI — htop, vim, lazygit and Claude Code all set `?1000`/`?1002` — so a badge painted at `absolute top-2 right-4 z-50` would be on screen for the entire life of those programs and would swallow clicks aimed at that program's own top-right corner, silently killing its mouse with no undo. The active `TerminalView` publishes `terminalMouseCaptured` and `releaseActiveMouse` through the store instead, the same way `terminalHasSelection` and `sttToggle` already do.
+- **`macOptionClickForcesSelection: true` is set, and without it macOS has no force-select at all.** `SelectionService.shouldForceSelection` is `isMac ? altKey && macOptionClickForcesSelection : shiftKey`, and the option defaults to `false` — so the "hold Shift to select while a program holds the mouse" escape hatch is Shift everywhere else and **Option** on macOS, and existed on macOS only once this was turned on.
+- **Set store function values via object-merge, not the updater form** — `set({ fn: value })`, not `set(state => ...)` — when publishing action callbacks (like `sttToggle`) into the Zustand store.
 
 ### bollard (Docker API)
 

app/src-tauri/src/commands/terminal_commands.rs

@@ -6,10 +6,58 @@ use crate::AppState;
 
 /// Build the command to run in the container terminal.
 ///
-/// For Bedrock Profile projects, wraps `claude` in a bash script that validates
-/// the AWS session first. If the SSO session is expired, runs `aws sso login`
-/// so the user can re-authenticate (the URL is clickable via xterm.js WebLinksAddon).
+/// Always a `bash -c` script, because every session runs [`UPDATE_PRELUDE`]
+/// before `exec claude`. For Bedrock Profile projects the script additionally
+/// validates the AWS session first, and runs `aws sso login` if it has expired
+/// so the user can re-authenticate (the URL is clickable via xterm.js
+/// WebLinksAddon).
 fn build_terminal_cmd(project: &Project, state: &AppState, session_name: Option<&str>) -> Vec<String> {
+    let settings = state.settings_store.get();
+    build_claude_terminal_cmd(
+        project,
+        settings.global_aws.aws_profile.as_deref(),
+        session_name,
+    )
+}
+
+/// Shell line run immediately before `exec claude` in every Claude terminal
+/// session.
+///
+/// `container/entrypoint.sh` already runs `claude update` when the container
+/// starts, but containers here use a stop/start (and often just keep running)
+/// model, so a long-lived container's CLI goes stale between restarts. Running
+/// it per session is what keeps a week-old container current.
+///
+/// Deliberately non-fatal and time-bounded: `|| echo` swallows a failure (no
+/// network, npm registry down) so a session always opens, and `timeout 60`
+/// bounds how long a user waits for a terminal.
+///
+/// **`flock` is load-bearing, not tidiness.** Nothing serialises this against
+/// the entrypoint's own `claude update`, and the entrypoint prints "container
+/// ready" only *after* its copy finishes — so "start the project, open a tab"
+/// races two updaters against the same `~/.claude/bin` install, as does
+/// opening two tabs at once. `|| echo` would then hide a half-written install
+/// behind a friendly message and the very next line (`exec claude`) would run
+/// it. `-w 90` gives the entrypoint's `timeout 120` copy room to finish rather
+/// than failing the wait, and `-E 0` makes losing the race a success: the
+/// other holder just updated, so there is nothing left to do.
+pub(crate) const UPDATE_PRELUDE: &str = concat!(
+    "flock -w 90 -E 0 /tmp/.triple-c-claude-update.lock ",
+    r#"timeout 60 claude update 2>&1 || echo "(update skipped — continuing)""#,
+);
+
+/// Single-quote one argument for interpolation into a shell script string.
+fn shell_quote_arg(arg: &str) -> String {
+    format!(" '{}'", arg.replace('\'', "'\\''"))
+}
+
+/// The testable core of [`build_terminal_cmd`], taking the resolved global AWS
+/// profile rather than the whole [`AppState`].
+fn build_claude_terminal_cmd(
+    project: &Project,
+    global_aws_profile: Option<&str>,
+    session_name: Option<&str>,
+) -> Vec<String> {
     let is_bedrock_profile = project.backend == Backend::Bedrock
         && project
             .bedrock_config
@@ -19,36 +67,27 @@ fn build_terminal_cmd(project: &Project, state: &AppState, session_name: Option<
 
     let permission_args = project.effective_permission_mode().cli_args();
 
+    // The args are interpolated into a shell script string, so single-quote
+    // each one.
+    let name_flag = session_name
+        .filter(|n| !n.is_empty())
+        .map(|n| format!(" -n{}", shell_quote_arg(n)))
+        .unwrap_or_default();
+    let permission_flags: String = permission_args.iter().map(|a| shell_quote_arg(a)).collect();
+    let claude_cmd = format!("exec claude{}{}", permission_flags, name_flag);
+
     if !is_bedrock_profile {
-        let mut cmd = vec!["claude".to_string()];
-        cmd.extend(permission_args);
-        if let Some(name) = session_name {
-            if !name.is_empty() {
-                cmd.push("-n".to_string());
-                cmd.push(name.to_string());
-            }
-        }
-        return cmd;
+        return vec![
+            "bash".to_string(),
+            "-c".to_string(),
+            format!("{}\n{}\n", UPDATE_PRELUDE, claude_cmd),
+        ];
     }
 
-    let profile = aws_commands::resolve_profile_for_project(
-        project,
-        state.settings_store.get().global_aws.aws_profile.as_deref(),
-    );
+    let profile = aws_commands::resolve_profile_for_project(project, global_aws_profile);
 
     // Build a bash wrapper that validates credentials, re-auths if needed,
     // then exec's into claude.
-    let name_flag = session_name
-        .filter(|n| !n.is_empty())
-        .map(|n| format!(" -n '{}'", n.replace('\'', "'\\''")))
-        .unwrap_or_default();
-    // The args are interpolated into a shell script string, so single-quote
-    // each one (same escaping style as name_flag above).
-    let permission_flags: String = permission_args
-        .iter()
-        .map(|a| format!(" '{}'", a.replace('\'', "'\\''")))
-        .collect();
-    let claude_cmd = format!("exec claude{}{}", permission_flags, name_flag);
 
     let script = format!(
         r#"
@@ -75,9 +114,11 @@ else
         echo ""
     fi
 fi
+{update_prelude}
 {claude_cmd}
 "#,
         profile = profile,
+        update_prelude = UPDATE_PRELUDE,
         claude_cmd = claude_cmd
     );
 
@@ -325,6 +366,9 @@ pub async fn stop_audio_bridge(
 
 #[cfg(test)]
 mod tests {
+    use super::{build_claude_terminal_cmd, UPDATE_PRELUDE};
+    use crate::models::Project;
+
     /// A dropped file must be named the way the *user* named it.
     ///
     /// The bug this pins: `upload_host_file_to_terminal` derived the tar entry
@@ -338,6 +382,122 @@ mod tests {
     /// answer comes from the spelling, and a path that does not name a file is
     /// refused rather than silently substituted (it used to fall back to
     /// `"dropped-file"`).
+    /// A `Project` with only the fields these tests care about set; the rest
+    /// come through serde so the test does not have to track every field.
+    fn project(backend: &str, bedrock_config: serde_json::Value) -> Project {
+        serde_json::from_value(serde_json::json!({
+            "id": "p1",
+            "name": "Test",
+            "paths": [],
+            "container_id": null,
+            "status": "running",
+            "backend": backend,
+            "bedrock_config": bedrock_config,
+            "ollama_config": null,
+            "openai_compatible_config": null,
+            "allow_docker_access": false,
+            "full_permissions": false,
+            "ssh_key_path": null,
+            "git_user_name": null,
+            "git_user_email": null,
+            "created_at": "now",
+            "updated_at": "now"
+        }))
+        .expect("test project deserializes")
+    }
+
+    /// Every Claude session updates the CLI before launching it.
+    ///
+    /// `container/entrypoint.sh` only updates at container *start*, and these
+    /// containers are long-lived, so a stale CLI is the normal case without
+    /// this. The plain (non-Bedrock) path therefore has to be a `bash -c`
+    /// wrapper rather than a bare `claude` argv.
+    #[test]
+    fn build_terminal_cmd_updates_before_launching_claude() {
+        let cmd = build_claude_terminal_cmd(&project("anthropic", serde_json::Value::Null), None, None);
+
+        assert_eq!(cmd[0], "bash");
+        assert_eq!(cmd[1], "-c");
+        assert!(
+            cmd[2].contains(UPDATE_PRELUDE),
+            "plain path must run the update prelude: {}",
+            cmd[2]
+        );
+        assert!(cmd[2].contains("exec claude"), "got: {}", cmd[2]);
+        // The update has to happen *before* the exec, which never returns.
+        assert!(
+            cmd[2].find(UPDATE_PRELUDE).unwrap() < cmd[2].find("exec claude").unwrap(),
+            "prelude must precede the exec: {}",
+            cmd[2]
+        );
+        assert!(
+            UPDATE_PRELUDE.contains("timeout 60") && UPDATE_PRELUDE.contains("||"),
+            "the update must stay time-bounded and non-fatal"
+        );
+    }
+
+    /// The session name is interpolated into a shell script, so a quote in it
+    /// must not break out of its single-quoted argument.
+    #[test]
+    fn build_terminal_cmd_escapes_a_quoted_session_name() {
+        let cmd = build_claude_terminal_cmd(
+            &project("anthropic", serde_json::Value::Null),
+            None,
+            Some("Bob's tab; rm -rf /"),
+        );
+
+        assert!(
+            cmd[2].contains(r#"exec claude -n 'Bob'\''s tab; rm -rf /'"#),
+            "session name must be single-quote escaped: {}",
+            cmd[2]
+        );
+    }
+
+    /// Permission flags travel the same escaped path, and an empty name adds
+    /// no `-n` at all.
+    #[test]
+    fn build_terminal_cmd_quotes_permission_flags_and_omits_an_empty_name() {
+        let mut p = project("anthropic", serde_json::Value::Null);
+        p.full_permissions = true;
+        let cmd = build_claude_terminal_cmd(&p, None, Some(""));
+
+        assert!(
+            cmd[2].contains("exec claude '--dangerously-skip-permissions'\n"),
+            "got: {}",
+            cmd[2]
+        );
+        assert!(!cmd[2].contains(" -n "), "empty name must add no flag: {}", cmd[2]);
+    }
+
+    /// The Bedrock-profile path keeps its AWS validation *and* gains the
+    /// prelude, immediately before the exec.
+    #[test]
+    fn build_terminal_cmd_bedrock_validates_aws_and_updates() {
+        let cmd = build_claude_terminal_cmd(
+            &project("bedrock", serde_json::json!({
+                "auth_method": "profile",
+                "aws_region": "us-east-1",
+                "aws_profile": "acme",
+                "model_id": null,
+                "disable_prompt_caching": false
+            })),
+            None,
+            Some("it's fine"),
+        );
+
+        assert_eq!(cmd[0], "bash");
+        let script = &cmd[2];
+        assert!(script.contains("aws sts get-caller-identity --profile 'acme'"), "got: {}", script);
+        assert!(script.contains("triple-c-sso-refresh"), "got: {}", script);
+        assert!(script.contains(UPDATE_PRELUDE), "got: {}", script);
+        assert!(script.contains(r#"exec claude -n 'it'\''s fine'"#), "got: {}", script);
+        assert!(
+            script.find(UPDATE_PRELUDE).unwrap() < script.find("exec claude").unwrap(),
+            "prelude must precede the exec: {}",
+            script
+        );
+    }
+
     #[test]
     fn a_dropped_file_keeps_the_name_the_user_dropped() {
         use crate::commands::file_commands::host_upload_name;

app/src-tauri/src/web_terminal/ws_handler.rs

@@ -206,6 +206,11 @@ pub async fn handle_connection(socket: WebSocket, state: Arc<WebTerminalState>)
     writer_handle.abort();
 }
 
+/// The desktop terminal's update prelude, reused verbatim. Shared rather than
+/// copied so the web terminal cannot drift from it — a duplicated `const` with
+/// a "keep these identical" comment is only as good as the next reader.
+use crate::commands::terminal_commands::UPDATE_PRELUDE;
+
 /// Build the command for a terminal session, mirroring terminal_commands.rs logic.
 fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settings_store::SettingsStore) -> Vec<String> {
     let is_bedrock_profile = project.backend == Backend::Bedrock
@@ -217,17 +222,6 @@ fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settin
 
     let permission_args = project.effective_permission_mode().cli_args();
 
-    if !is_bedrock_profile {
-        let mut cmd = vec!["claude".to_string()];
-        cmd.extend(permission_args);
-        return cmd;
-    }
-
-    let profile = aws_commands::resolve_profile_for_project(
-        project,
-        settings_store.get().global_aws.aws_profile.as_deref(),
-    );
-
     // The args are interpolated into a shell script string below, so
     // single-quote each one.
     let permission_flags: String = permission_args
@@ -236,6 +230,19 @@ fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settin
         .collect();
     let claude_cmd = format!("exec claude{}", permission_flags);
 
+    if !is_bedrock_profile {
+        return vec![
+            "bash".to_string(),
+            "-c".to_string(),
+            format!("{}\n{}\n", UPDATE_PRELUDE, claude_cmd),
+        ];
+    }
+
+    let profile = aws_commands::resolve_profile_for_project(
+        project,
+        settings_store.get().global_aws.aws_profile.as_deref(),
+    );
+
     let script = format!(
         r#"
 echo "Validating AWS session for profile '{profile}'..."
@@ -260,9 +267,11 @@ else
         echo ""
     fi
 fi
+{update_prelude}
 {claude_cmd}
 "#,
         profile = profile,
+        update_prelude = UPDATE_PRELUDE,
         claude_cmd = claude_cmd
     );
 

app/src/components/layout/StatusBar.tsx

@@ -10,7 +10,7 @@ interface Props {
 export default function StatusBar({ stt }: Props) {
   const {
     projects, sessions, terminalHasSelection, activeSessionId, sttEnabled,
-    terminalAtBottom, scrollActiveToBottom, notesDockOpen, toggleNotesDock,
+    notesDockOpen, toggleNotesDock, terminalMouseCaptured, releaseActiveMouse,
   } = useAppState(
     useShallow(s => ({
       projects: s.projects,
@@ -18,10 +18,10 @@ export default function StatusBar({ stt }: Props) {
       terminalHasSelection: s.terminalHasSelection,
       activeSessionId: s.activeSessionId,
       sttEnabled: s.appSettings?.stt?.enabled,
-      terminalAtBottom: s.terminalAtBottom,
-      scrollActiveToBottom: s.scrollActiveToBottom,
       notesDockOpen: s.notesDockOpen,
       toggleNotesDock: s.toggleNotesDock,
+      terminalMouseCaptured: s.terminalMouseCaptured,
+      releaseActiveMouse: s.releaseActiveMouse,
     }))
   );
   const running = projects.filter((p) => p.status === "running").length;
@@ -60,15 +60,16 @@ export default function StatusBar({ stt }: Props) {
           </span>
         </>
       )}
-      {/* Right-aligned controls: Jump to Current + STT mic */}
+      {/* Right-aligned controls: mouse release + Notes + STT mic */}
       <div className="ml-auto flex items-center gap-3 pl-2">
-        {activeSessionId && !terminalAtBottom && (
+        {activeSessionId && terminalMouseCaptured && (
           <button
-            onClick={() => scrollActiveToBottom()}
+            data-mouse-release="true"
+            onClick={() => releaseActiveMouse()}
             className="text-[var(--accent)] hover:text-[var(--accent-hover)] cursor-pointer"
-            title="Scroll the terminal to the latest output"
+            title="A program in the container is reading the mouse, so clicks and drags go to it instead of selecting text. Click, or press Ctrl+Shift+X, to take it back. To select text without taking it back, hold Shift while dragging (Option on macOS)."
           >
-            Jump to Current ↓
+            🖱 Mouse captured — release
           </button>
         )}
         <button

app/src/components/terminal/TerminalView.test.tsx

@@ -3,6 +3,7 @@ import { render, fireEvent, cleanup, act } from "@testing-library/react";
 import TerminalView, { supersedes } from "./TerminalView";
 import { useAppState } from "../../store/appState";
 import { uploadHostFileToTerminal } from "../../lib/tauri-commands";
+import { URL_TOAST_SELECTOR } from "./UrlToast";
 
 /**
  * The window-wide native drag-drop listener, captured at registration.
@@ -370,15 +371,34 @@ describe("TerminalView — where a dropped file lands", () => {
     expect(vi.mocked(uploadHostFileToTerminal)).toHaveBeenCalledTimes(1);
   });
 
-  it("uploads a file dropped onto the always-present Following toggle", async () => {
-    // The regression this file could not see. The toggle is `absolute top-2
-    // right-4 z-50` and is rendered unconditionally, so `elementFromPoint`
-    // returns *it* for the terminal's top-right corner — and a gate asking
+  it("uploads a file dropped onto the chrome painted over the terminal", async () => {
+    // The regression this file could not see. Chrome like the URL toast is a
+    // *sibling* of the xterm host painted over the pane, so
+    // `elementFromPoint` returns it rather than the host — and a gate asking
     // "is what is painted here inside the xterm host?" answered no, forever,
     // with no message and no log line. jsdom never ran that branch.
-    const view = await mountWithLayout();
-    const toggle = view.getByTitle(/Auto-scroll/i);
-    stubElementFromPoint(toggle);
+    //
+    // The original fixture was the always-rendered "▼ Following" toggle. That
+    // control is retired and the mouse-release button that could have replaced
+    // it lives in the status bar now, so the toast is what stands in — it is
+    // real chrome over the pane, which is the only property under test.
+    await mountWithLayout();
+    const emit = ptyOutput.listeners.get("terminal-output-s1");
+    if (!emit) throw new Error("no terminal-output listener registered");
+    await act(async () => {
+      emit({
+        payload: Array.from(
+          new TextEncoder().encode(
+            `\x1b]7777;open;${btoa("https://example.com/x")}\x07`,
+          ),
+        ),
+      });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+    const toast = document.querySelector(URL_TOAST_SELECTOR);
+    if (!toast) throw new Error("URL toast not shown");
+    stubElementFromPoint(toast);
 
     await drop(780, 10);
 
@@ -594,3 +614,88 @@ describe("TerminalView — focus on request", () => {
     expect(document.activeElement).toBe(helperTextarea(view.container));
   });
 });
+describe("TerminalView — releasing a captured mouse", () => {
+  /** Feed raw bytes to the terminal as if the container had printed them, and
+   *  let xterm drain its write queue (it parses asynchronously). */
+  async function emitBytes(text: string) {
+    const emit = ptyOutput.listeners.get("terminal-output-s1");
+    if (!emit) throw new Error("no terminal-output listener registered");
+    await act(async () => {
+      emit({ payload: Array.from(new TextEncoder().encode(text)) });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+  }
+
+  /** What the status bar would render from: the active terminal publishes the
+   *  capture state, and the release action, into the store. The control itself
+   *  lives in `StatusBar` — deliberately, so it never sits on top of the TUI
+   *  that is asking for the mouse. */
+  function captured(): boolean {
+    return useAppState.getState().terminalMouseCaptured;
+  }
+
+  it("shows nothing while the container has not grabbed the mouse", async () => {
+    mountSession("claude");
+    await act(async () => {});
+
+    expect(captured()).toBe(false);
+  });
+
+  it("surfaces a release control once the container turns mouse tracking on", async () => {
+    // `?1003h` is any-event tracking: every mouse *move* over the terminal is
+    // reported to the app. When the TUI that asked for it dies without
+    // resetting the mode, xterm keeps routing moves to the PTY and drops text
+    // selection — the freeze this control exists to break out of.
+    mountSession("claude");
+    await act(async () => {});
+
+    await emitBytes("\x1b[?1003h\x1b[?1006h");
+
+    expect(captured()).toBe(true);
+  });
+
+  it("clears the mode locally, without sending a byte to the container", async () => {
+    // The reset is written into xterm's own parser, not onto the wire. The
+    // program inside is usually gone; if it is not, it must not be told the
+    // user pulled the mouse back, or a live TUI would just re-grab it.
+    mountSession("claude");
+    await act(async () => {});
+    await emitBytes("\x1b[?1003h");
+    terminalInput.mockClear();
+
+    // Exactly what the status-bar button's onClick does.
+    const release = useAppState.getState().releaseActiveMouse;
+    await act(async () => {
+      release();
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+
+    // The published flag is bound to the live mode, so it going false *is* the
+    // assertion that xterm's mouse tracking is back to "none".
+    expect(captured()).toBe(false);
+    expect(terminalInput).not.toHaveBeenCalled();
+  });
+
+  it("releases on Ctrl+Shift+X, for when the pointer itself is unusable", async () => {
+    const { container } = mountSession("claude");
+    await act(async () => {});
+    await emitBytes("\x1b[?1002h");
+    terminalInput.mockClear();
+
+    await act(async () => {
+      fireEvent.keyDown(helperTextarea(container), {
+        key: "X",
+        ctrlKey: true,
+        shiftKey: true,
+      });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+
+    expect(captured()).toBe(false);
+    // The chord must not also reach the container as input.
+    expect(terminalInput).not.toHaveBeenCalled();
+  });
+});

app/src/components/terminal/TerminalView.tsx

@@ -99,8 +99,8 @@ export default function TerminalView({ sessionId, active }: Props) {
   const { sendInput, pasteImage, resize, onOutput, onExit } = useTerminal();
   const gpuRenderingSetting = useAppState(s => s.appSettings?.terminal_gpu_rendering ?? null);
   const setTerminalHasSelection = useAppState(s => s.setTerminalHasSelection);
-  const setTerminalAtBottom = useAppState(s => s.setTerminalAtBottom);
-  const setScrollActiveToBottom = useAppState(s => s.setScrollActiveToBottom);
+  const setTerminalMouseCaptured = useAppState(s => s.setTerminalMouseCaptured);
+  const setReleaseActiveMouse = useAppState(s => s.setReleaseActiveMouse);
 
   const ssoBufferRef = useRef("");
   const ssoTriggeredRef = useRef(false);
@@ -219,14 +219,11 @@ export default function TerminalView({ sessionId, active }: Props) {
     return () => document.removeEventListener("keydown", onKeyDown, true);
   }, []);
   const [imagePasteMsg, setImagePasteMsg] = useState<string | null>(null);
-  const [isAtBottom, setIsAtBottom] = useState(true);
-  const [isAutoFollow, setIsAutoFollow] = useState(true);
   const [contextMenu, setContextMenu] = useState<{ x: number; y: number } | null>(null);
-  const isAtBottomRef = useRef(true);
-  // Tracks user intent to follow output — only set to false by explicit user
-  // actions (mouse wheel up), not by xterm scroll events during writes.
-  const autoFollowRef = useRef(true);
-  const lastUserScrollTimeRef = useRef(0);
+  // True while the program in the container holds mouse reporting open (any of
+  // the DECSET ?1000/?1002/?1003 tracking modes). See `syncMouseCapture`.
+  const [mouseCaptured, setMouseCaptured] = useState(false);
+  const mouseCapturedRef = useRef(false);
 
   // Keep latest `active` readable inside long-lived listeners (drag-drop below,
   // and the unmount-cleanup effect further down).
@@ -251,10 +248,10 @@ export default function TerminalView({ sessionId, active }: Props) {
   //
   // The rect asked about is the **pane wrapper**, not the xterm host inside it:
   // the pane is what the user sees as "the terminal", gutter included, and the
-  // chrome painted over it (the Following toggle, the URL toast) is a sibling
-  // of the host rather than a child. Nothing painted over the pane refuses a
-  // drop on its own account — asking "is this element mine?" once turned every
-  // pixel under that chrome into a permanent dead zone.
+  // chrome painted over it (the mouse-release badge, the URL toast) is a
+  // sibling of the host rather than a child. Nothing painted over the pane
+  // refuses a drop on its own account — asking "is this element mine?" once
+  // turned every pixel under that chrome into a permanent dead zone.
   useEffect(() => {
     let unlisten: (() => void) | undefined;
     let cancelled = false;
@@ -315,12 +312,60 @@ export default function TerminalView({ sessionId, active }: Props) {
     };
   }, [sessionId, sendInput]);
 
+  /**
+   * Reconcile the badge with xterm's live mouse-tracking mode.
+   *
+   * There is no event for this, but there does not need to be a poll either:
+   * the mode only ever changes because the container printed a DECSET/DECRST
+   * sequence, so checking once per write covers every transition, exactly when
+   * it happens. The ref gate keeps the common case (mode unchanged, thousands
+   * of writes a second) down to one string comparison and no re-render.
+   */
+  const syncMouseCapture = useCallback(() => {
+    const term = termRef.current;
+    if (!term) return;
+    const captured = term.modes.mouseTrackingMode !== "none";
+    if (captured === mouseCapturedRef.current) return;
+    mouseCapturedRef.current = captured;
+    setMouseCaptured(captured);
+  }, []);
+
+  /**
+   * Take the mouse back from a program that grabbed it and never let go.
+   *
+   * A TUI that dies mid-menu (or is killed, or detaches) leaves its mouse
+   * tracking modes set. xterm goes on routing clicks, drags and — under
+   * `?1003` — every pointer *move* to the PTY, which kills text selection and
+   * floods the prompt with escape bytes. The result reads as a frozen
+   * terminal, and until now the only exit was closing the tab.
+   *
+   * The reset is `term.write`, deliberately, not `sendInput`: it goes into
+   * xterm's own parser and never onto the wire. The program that asked for
+   * tracking is usually already gone; if it is not, telling it the user pulled
+   * the mouse back would only invite it to grab again on its next repaint.
+   */
+  const releaseMouse = useCallback(() => {
+    const term = termRef.current;
+    if (!term) return;
+    // The three tracking modes, then the two encodings they report in. All
+    // five, because a program is free to have set any combination and a
+    // leftover encoding mode outlives the tracking mode that motivated it.
+    term.write("\x1b[?1000l\x1b[?1002l\x1b[?1003l\x1b[?1006l\x1b[?1015l", syncMouseCapture);
+  }, [syncMouseCapture]);
+
   useEffect(() => {
     if (!containerRef.current) return;
 
     const term = new Terminal({
       cursorBlink: true,
       fontSize: 14,
+      // Let the user select text even while a program holds the mouse.
+      // xterm's force-selection modifier is Shift everywhere *except* macOS,
+      // where it is Option and is gated behind this option, which defaults to
+      // false — so without this line Mac users have no force-select at all and
+      // the only way to copy from a mouse-driven TUI is to take the mouse back
+      // first. `SelectionService.shouldForceSelection`.
+      macOptionClickForcesSelection: true,
       fontFamily: "'JetBrains Mono', 'Fira Code', 'Cascadia Code', Menlo, Monaco, monospace",
       theme: {
         background: "#0d1117",
@@ -391,6 +436,14 @@ export default function TerminalView({ sessionId, active }: Props) {
         useAppState.getState().sttToggle();
         return false;
       }
+      // Ctrl+Shift+X hands the mouse back. Same action as the badge, bound to
+      // a key because the failure this recovers from is *the pointer not
+      // working* — a control you have to click can be unreachable in exactly
+      // the situation that calls for it.
+      if (event.type === "keydown" && event.ctrlKey && event.shiftKey && event.key === "X") {
+        releaseMouse();
+        return false;
+      }
       // Shift+Enter inserts a newline in Claude Code's prompt instead of
       // submitting it. xterm.js does not consult `shiftKey` for Enter
       // (`Keyboard.ts`, `case 13`), so without this branch Shift+Enter is
@@ -501,42 +554,6 @@ export default function TerminalView({ sessionId, active }: Props) {
       );
     });
 
-    // Detect user-initiated scroll-up (mouse wheel) to pause auto-follow.
-    // Captured during capture phase so it fires before xterm's own handler.
-    const handleWheel = (e: WheelEvent) => {
-      lastUserScrollTimeRef.current = Date.now();
-      if (e.deltaY < 0) {
-        autoFollowRef.current = false;
-        setIsAutoFollow(false);
-        isAtBottomRef.current = false;
-        setIsAtBottom(false);
-      }
-    };
-    containerRef.current.addEventListener("wheel", handleWheel, { capture: true, passive: true });
-
-    // Track scroll position to show "Jump to Current" button.
-    // Debounce state updates via rAF to avoid excessive re-renders during rapid output.
-    let scrollStateRafId: number | null = null;
-    const scrollDisposable = term.onScroll(() => {
-      const buf = term.buffer.active;
-      const atBottom = buf.viewportY >= buf.baseY;
-      isAtBottomRef.current = atBottom;
-
-      // Re-enable auto-follow only when USER scrolls to bottom (not write-triggered)
-      const isUserScroll = (Date.now() - lastUserScrollTimeRef.current) < 300;
-      if (atBottom && isUserScroll && !autoFollowRef.current) {
-        autoFollowRef.current = true;
-        setIsAutoFollow(true);
-      }
-
-      if (scrollStateRafId === null) {
-        scrollStateRafId = requestAnimationFrame(() => {
-          scrollStateRafId = null;
-          setIsAtBottom(isAtBottomRef.current);
-        });
-      }
-    });
-
     // Track text selection to show copy hint in status bar
     const selectionDisposable = term.onSelectionChange(() => {
       setTerminalHasSelection(term.hasSelection());
@@ -599,15 +616,11 @@ export default function TerminalView({ sessionId, active }: Props) {
 
     const outputPromise = onOutput(sessionId, (data) => {
       if (aborted) return;
-      term.write(data, () => {
-        if (autoFollowRef.current) {
-          term.scrollToBottom();
-          if (!isAtBottomRef.current) {
-            isAtBottomRef.current = true;
-            setIsAtBottom(true);
-          }
-        }
-      });
+      // Scrolling on new output is xterm's own job, and it already gets it
+      // right: it follows the tail while the viewport is at the bottom and
+      // holds position while you are reading further up. The manual
+      // `scrollToBottom()` that used to live here fought that second half.
+      term.write(data, syncMouseCapture);
       detector.feed(data);
 
       // Scan for SSO refresh marker in terminal output
@@ -649,11 +662,18 @@ export default function TerminalView({ sessionId, active }: Props) {
       resizeRafId = requestAnimationFrame(() => {
         resizeRafId = null;
         if (!containerRef.current || containerRef.current.offsetWidth === 0) return;
+        // Whether the viewport was following the tail has to be sampled
+        // *before* the fit: reflowing wrapped lines moves `baseY`, so asking
+        // afterwards cannot tell "was at the bottom" from "was pushed off it".
+        const wasAtBottom =
+          term.buffer.active.viewportY >= term.buffer.active.baseY;
         fitAddon.fit();
         resize(sessionId, term.cols, term.rows);
-        if (autoFollowRef.current) {
-          term.scrollToBottom();
-        }
+        // Only re-anchor a viewport that was already on the tail. This
+        // observer fires for any pane size change — opening the Notes dock,
+        // dragging the sidebar, resizing the window — and none of those are a
+        // reason to yank someone away from the scrollback they are reading.
+        if (wasAtBottom) term.scrollToBottom();
       });
     });
     resizeObserver.observe(containerRef.current);
@@ -667,14 +687,11 @@ export default function TerminalView({ sessionId, active }: Props) {
       osc52Disposable.dispose();
       relayDisposable.dispose();
       inputDisposable.dispose();
-      scrollDisposable.dispose();
       selectionDisposable.dispose();
       setTerminalHasSelection(false);
-      containerRef.current?.removeEventListener("wheel", handleWheel, { capture: true });
       containerRef.current?.removeEventListener("paste", handlePaste, { capture: true });
       outputPromise.then((fn) => fn?.());
       exitPromise.then((fn) => fn?.());
-      if (scrollStateRafId !== null) cancelAnimationFrame(scrollStateRafId);
       if (resizeRafId !== null) cancelAnimationFrame(resizeRafId);
       resizeObserver.disconnect();
       try { webglRef.current?.dispose(); } catch { /* may already be disposed */ }
@@ -723,10 +740,12 @@ export default function TerminalView({ sessionId, active }: Props) {
     }
 
     if (active) {
+      // Same rule as the resize observer: re-anchor only what was already
+      // anchored, so a tab left scrolled up comes back where it was left.
+      const wasAtBottom =
+        term.buffer.active.viewportY >= term.buffer.active.baseY;
       fitRef.current?.fit();
-      if (autoFollowRef.current) {
-        term.scrollToBottom();
-      }
+      if (wasAtBottom) term.scrollToBottom();
       term.focus();
     }
   }, [active, gpuRenderingSetting]);
@@ -826,39 +845,6 @@ export default function TerminalView({ sessionId, active }: Props) {
       );
   }, [urlPrompt, projectId, dismissUrlPrompt]);
 
-  const handleScrollToBottom = useCallback(() => {
-    const term = termRef.current;
-    if (term) {
-      autoFollowRef.current = true;
-      setIsAutoFollow(true);
-      fitRef.current?.fit();
-      term.scrollToBottom();
-      isAtBottomRef.current = true;
-      setIsAtBottom(true);
-    }
-  }, []);
-
-  // Surface this terminal's scroll state to the status bar's "Jump to Current"
-  // control, but only while it's the active (visible) terminal.
-  useEffect(() => {
-    if (!active) return;
-    setTerminalAtBottom(isAtBottom);
-    setScrollActiveToBottom(handleScrollToBottom);
-  }, [active, isAtBottom, handleScrollToBottom, setTerminalAtBottom, setScrollActiveToBottom]);
-
-  // On unmount, if this was the active terminal, clear the status-bar scroll
-  // state so it doesn't point at a disposed terminal. (Tab switches don't
-  // unmount — the deactivating terminal stays mounted but hidden — so this
-  // only fires when the active session is actually closed.)
-  useEffect(() => {
-    return () => {
-      if (activeRef.current) {
-        setTerminalAtBottom(true);
-        setScrollActiveToBottom(() => {});
-      }
-    };
-  }, [setTerminalAtBottom, setScrollActiveToBottom]);
-
   const writeSelection = useCallback((mode: "trimmed" | "raw") => {
     const term = termRef.current;
     if (!term) return;
@@ -876,20 +862,26 @@ export default function TerminalView({ sessionId, active }: Props) {
     setContextMenu({ x: e.clientX, y: e.clientY });
   }, []);
 
-  const handleToggleAutoFollow = useCallback(() => {
-    const next = !autoFollowRef.current;
-    autoFollowRef.current = next;
-    setIsAutoFollow(next);
-    if (next) {
-      const term = termRef.current;
-      if (term) {
-        fitRef.current?.fit();
-        term.scrollToBottom();
-        isAtBottomRef.current = true;
-        setIsAtBottom(true);
+  // Surface the capture state and its escape hatch to the status bar, but only
+  // while this is the visible terminal.
+  useEffect(() => {
+    if (!active) return;
+    setTerminalMouseCaptured(mouseCaptured);
+    setReleaseActiveMouse(releaseMouse);
+  }, [active, mouseCaptured, releaseMouse, setTerminalMouseCaptured, setReleaseActiveMouse]);
+
+  // On unmount, if this was the active terminal, clear the status-bar state so
+  // it does not point at a disposed terminal. (Tab switches do not unmount —
+  // the deactivating terminal stays mounted but hidden — so this only fires
+  // when the active session is actually closed.)
+  useEffect(() => {
+    return () => {
+      if (activeRef.current) {
+        setTerminalMouseCaptured(false);
+        setReleaseActiveMouse(() => {});
       }
-    }
-  }, []);
+    };
+  }, [setTerminalMouseCaptured, setReleaseActiveMouse]);
 
   return (
     <div
@@ -915,18 +907,6 @@ export default function TerminalView({ sessionId, active }: Props) {
           {imagePasteMsg}
         </div>
       )}
-      {/* Auto-follow toggle - top right */}
-      <button
-        onClick={handleToggleAutoFollow}
-        className={`absolute top-2 right-4 z-50 px-2 py-1 rounded text-[10px] font-medium border shadow-sm transition-colors cursor-pointer ${
-          isAutoFollow
-            ? "bg-[#1a2332] text-[#3fb950] border-[#238636] hover:bg-[#1f2d3d]"
-            : "bg-[#1f2937] text-[#8b949e] border-[#30363d] hover:bg-[#2d3748]"
-        }`}
-        title={isAutoFollow ? "Auto-scrolling to latest output (click to pause)" : "Auto-scroll paused (click to resume)"}
-      >
-        {isAutoFollow ? "▼ Following" : "▽ Paused"}
-      </button>
       {/* Padding lives on this wrapper, NOT on the xterm host element. xterm's
           FitAddon measures the host element it's mounted into; padding there
           causes the grid to overhang and clip the rightmost column / bottom

app/src/lib/dropTarget.test.ts

@@ -243,11 +243,12 @@ describe("dropTarget", () => {
   describe("chrome over a pane, with no dialog open", () => {
     /** Everything that is painted over a pane and is not a blocker. */
     const CHROME: Array<[string, () => HTMLElement]> = [
-      // `TerminalView`'s "▼ Following / ▽ Paused" toggle: `absolute top-2
-      // right-4 z-50`, rendered unconditionally, and a *sibling* of the xterm
-      // host — so "does the pane contain what is painted here?" made the
-      // terminal's top-right corner a dead zone no user action could clear.
-      ["the Following/Paused toggle", () => document.createElement("button")],
+      // `TerminalView`'s mouse-release badge: `absolute top-2 right-4 z-50`,
+      // and a *sibling* of the xterm host — so "does the pane contain what is
+      // painted here?" made the terminal's top-right corner a dead zone no
+      // user action could clear. (The retired Following toggle held the same
+      // corner and produced the original bug.)
+      ["the mouse-release badge", () => document.createElement("button")],
       // `ToastHost`: `fixed bottom-4 right-4 z-[60]`, 24rem wide, over every
       // pane, and its error cards stay until dismissed.
       ["a toast card", () => document.createElement("div")],

app/src/lib/dropTarget.ts

@@ -26,8 +26,8 @@
  *
  * - Asking `el.contains(document.elementFromPoint(x, y))` — "is the thing
  *   painted here mine?" — refused drops onto anything painted *over* a pane
- *   that is not part of it: `TerminalView`'s always-rendered "▼ Following"
- *   toggle (a sibling of the xterm host), the URL toast, `ToastHost`'s stack.
+ *   that is not part of it: `TerminalView`'s mouse-release badge (a sibling
+ *   of the xterm host), the URL toast, `ToastHost`'s stack.
  *   Permanent dead zones no user action could clear.
  * - Replacing that with "is a *blocking overlay* painted here?" removed the
  *   dead zones and opened a hole instead. `elementFromPoint` returns the

app/src/store/appState.ts

@@ -205,16 +205,20 @@ interface AppState {
   // UI state
   terminalHasSelection: boolean;
   setTerminalHasSelection: (has: boolean) => void;
+  // Whether a program in the active terminal is holding mouse reporting open,
+  // and how to take it back. Surfaced so the release control can live in the
+  // status bar: painted over the terminal it would sit on top of whatever TUI
+  // is asking for the mouse, and swallow clicks aimed at that program's own
+  // top-right corner for as long as it ran. Only the active TerminalView
+  // writes these.
+  terminalMouseCaptured: boolean;
+  setTerminalMouseCaptured: (captured: boolean) => void;
+  releaseActiveMouse: () => void;
+  setReleaseActiveMouse: (fn: () => void) => void;
   // STT toggle for the active session, registered by App so the terminal's
   // Ctrl+Shift+M shortcut can trigger the single status-bar mic instance.
   sttToggle: () => void;
   setSttToggle: (fn: () => void) => void;
-  // Active terminal scroll state, surfaced so the status bar can host the
-  // "Jump to Current" control. Only the active TerminalView writes these.
-  terminalAtBottom: boolean;
-  setTerminalAtBottom: (v: boolean) => void;
-  scrollActiveToBottom: () => void;
-  setScrollActiveToBottom: (fn: () => void) => void;
   sidebarView: "projects" | "settings";
   setSidebarView: (view: "projects" | "settings") => void;
   sidebarCollapsed: boolean;
@@ -496,12 +500,12 @@ export const useAppState = create<AppState>((set) => ({
   // UI state
   terminalHasSelection: false,
   setTerminalHasSelection: (has) => set({ terminalHasSelection: has }),
+  terminalMouseCaptured: false,
+  setTerminalMouseCaptured: (captured) => set({ terminalMouseCaptured: captured }),
+  releaseActiveMouse: () => {},
+  setReleaseActiveMouse: (fn) => set({ releaseActiveMouse: fn }),
   sttToggle: () => {},
   setSttToggle: (fn) => set({ sttToggle: fn }),
-  terminalAtBottom: true,
-  setTerminalAtBottom: (v) => set({ terminalAtBottom: v }),
-  scrollActiveToBottom: () => {},
-  setScrollActiveToBottom: (fn) => set({ scrollActiveToBottom: fn }),
   sidebarView: "projects",
   setSidebarView: (view) => set({ sidebarView: view }),
   sidebarCollapsed: loadSidebarCollapsed(),

container/entrypoint.sh

@@ -639,8 +639,14 @@ fi
 # any terminal session launches `claude`. Runs as the claude user (the CLI is
 # installed under /home/claude/.claude/bin). Non-fatal and time-bounded so a
 # slow or offline network never blocks container readiness.
+# The lock is shared with the per-session update that every Claude terminal
+# runs before `exec claude` (commands/terminal_commands.rs, UPDATE_PRELUDE).
+# "Container ready" is printed *after* this finishes, so a user who starts a
+# project and immediately opens a tab would otherwise have two updaters
+# rewriting ~/.claude/bin at once, and the session's `|| echo` would hide the
+# damage right before it ran the result.
 echo "entrypoint: checking for Claude Code updates..."
-timeout 120 su -s /bin/bash claude -c 'export PATH="/home/claude/.claude/bin:/home/claude/.local/bin:$PATH"; claude update' \
+timeout 120 su -s /bin/bash claude -c 'export PATH="/home/claude/.claude/bin:/home/claude/.local/bin:$PATH"; flock -w 90 -E 0 /tmp/.triple-c-claude-update.lock claude update' \
     && echo "entrypoint: Claude Code is up to date" \
     || echo "entrypoint: warning — Claude Code update skipped or failed (continuing)"