68 Commits

Include renames

Author	SHA1	Message	Date
shadow-testandClaude Opus 5	84a67fcd0d	Stop an empty base-image label from silencing the migration notice ... A project can be out of date and say nothing about it, in two ways that compound: the lineage lookup treats "unknown" as an answer, and the fallback that exists for unknown lineage disappears when its probe fails. `create_container` always writes triple-c.base-image-id, even when the value is unknown — deliberately, so an inherited image label cannot ride a snapshot forever. That makes Some("") the ordinary reading from a container whose lineage was never established. The lookup filtered for emptiness only on the final result, so that empty string satisfied the container branch and skipped the snapshot entirely: a snapshot that had recorded a real lineage was never consulted, and the project reported "unknown" with the answer one lookup away. Each source is now filtered before it can answer, in pick_recorded_lineage, which is a plain function so the case has a test that fails against the old logic. A genuinely pre-label project stays unknown, and should: its ancestor is not knowable, and inventing one would make it look permanently current. The probe is the intended signal for those — but if the probe failed, get_container_staleness returned early with nothing populated, the banner found no gaps and rendered null, and the probe_error it already knew how to display sat behind a gate that returned before reaching it. Silence there is indistinguishable from "up to date", and it is likeliest for the oldest and largest projects, whose manifests are the ones apt to exceed the inspection limit — one real project measured 6.93 MB against an 8 MB cap. An unknown-lineage container whose probe failed now says the check could not be completed, with the reason, under the tone that means unresolved rather than the one that means something is wrong. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-13 21:24:51 -07:00
jknapp	88f2e73474	Merge branch 'main' into fix/scheduler-home-clobber	2026-08-12 13:55:37 +00:00
shadow-testandClaude Opus 5	fa4940dd7d	Say when a scheduled task is running ... A run is detached — cron has no terminal, and the app fires it as a detached exec — so triggering one and watching the log was indistinguishable from triggering one that died. Worse, `claude -p` writes its answer in a single burst at the end, so a healthy run shows nothing but its log header for as long as it is thinking. The honest reading of the old UI was "it stalled". triple-c-task-runner now publishes a state file per run (pid, start time, log path) and removes it from an EXIT trap. flock remains what actually prevents overlapping runs; this is purely observability, so every reader verifies the pid rather than trusting the file — a container stopped mid-run cannot fire a trap, and a task stuck on "running" forever would be a worse lie than no indicator at all. Stale files are cleared on read. On top of that: - `list` grows a status column: "running 4m12s" or "idle". - `status [--id] [--watch]` answers "is it still going?" directly, with elapsed time and the tail of the log when there is any output yet. - `run` streams the log instead of blocking silently, and refuses to start a task that is already running. - The Automation tab marks a running task, disables its Run now button, and polls while anything is in flight — including the second or two between firing a run and the runner registering it, which is the exact window that used to read as dead. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-12 06:33:49 -07:00
shadow-testandClaude Opus 5	5f990dd28b	Sweep the snapshot commits recreation leaves behind ... Every recreation commits the container to triple-c-snapshot-{id}:latest and moves that tag; the image it pointed at keeps its layers and loses its name. Nothing deleted those, so they accumulate — measured on one real host, 7 orphans holding 7.4 GB, three of them from a single day's work. `sweep_orphaned_snapshots` removes them, under two conditions that are the whole safety argument. Untagged: every image the app depends on carries a tag, so a project's live `:latest` and a migration's `pre-migration-*` rollback pin cannot match the filter at all. And labelled `triple-c.managed=true`, which `docker commit` copies from the container onto the image — the user's own dangling images are not ours to delete. Removal is unforced on top of that, so Docker refuses while any container is still built from the image, including the stopped containers of projects that are not running; those are counted and left for the next sweep. It runs after a recreation, which is when the orphan it just made becomes removable, and after a migration is accepted, which is the moment dropping the pin turns the pre-migration snapshot into an orphan. Both detached: this is housekeeping, and a full disk beats a project that will not start. Each sweep clears every orphan it finds, so recreations that predate it are cleaned up too. The label string is now a constant rather than four literals, and a test pins both filter conditions in place. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-11 19:01:20 -07:00
shadow-test	77567ac2ae	Merge remote-tracking branch 'origin/main' into feature/corporate-ca ... # Conflicts: # app/src/lib/tauri-commands.ts	2026-08-10 11:20:23 -07:00
Claude	7a5823cb2b	Inject the corporate CA certificate into containers ... Behind a TLS-terminating corporate proxy every HTTPS call inside a container fails — npm, pip, git, curl, the browser-view pane, and Claude Code's own API requests. There was no mechanism at all: installing the certificate by hand inside a container is lost on Reset and had to be repeated per project. A global CA path in AppSettings with a per-project override on Project, taking either a single certificate file or a directory. It is bind-mounted read-only at /tmp/.host-ca (mirroring /tmp/.host-ssh and /tmp/.host-aws) and applied by entrypoint.sh on every start, so it survives recreation, migration and Reset. Four things this gets right that are easy to get wrong: * update-ca-certificates globs *.crt case-sensitively, so a .pem that is merely copied in is ignored in silence. Certificates are renamed, by container_cert_name() in Rust and a mirrored few lines of shell. * The system store only serves curl/git/apt. Node — and so Claude Code itself — needs NODE_EXTRA_CA_CERTS, Python needs REQUESTS_CA_BUNDLE/SSL_CERT_FILE, and Chromium reads neither: it wants ~/.pki/nssdb, seeded with certutil (libnss3-tools, added to the image). * Those vars are set from Rust at creation, never exported by the entrypoint — a terminal is a docker exec and sees nothing the entrypoint exported. They are emitted empty when no CA is configured, since docker commit bakes env into the snapshot image. * triple-c.ca-fingerprint hashes the certificate bytes as well as the path, so a CA rotated in at the same location still forces a recreation. Verified end to end against a real container and a self-signed CA: curl, node, python and git all complete a TLS handshake against a server signed by it and all three fail in the same container without it; the env vars are visible from a docker exec session; the store is cleaned when the setting is cleared. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KSP2KNPhuWKQ4DL5TZEn3k	2026-08-10 10:40:21 -07:00
shadow-testandClaude Opus 5	c3f92674b1	Fix the shared Claude auth flow: whole sign-in URL, recoverable rejected code ... Two compounding bugs made `claude setup-token` unusable, both measured against 2.1.226 under a pty rather than reasoned about. **The sign-in URL was truncated.** The CLI emits it as an OSC 8 hyperlink and slices the *visible* text of that hyperlink to the terminal width: a 346 character URL arrives at 80 columns as five separate hyperlink emissions, each carrying the whole URL in its parameter and 80 characters of it on screen. The transcript scraper picked up the first slice — a URL that parses, points at claude.com, and cannot authorise anything. The ANSI stripper now surfaces the OSC 8 target and `claude-token-link` carries it to the UI, which prefers it over the scraped text. It still goes through `sanitizeRelayUrl` with the ANTHROPIC_SIGN_IN_HOSTS allowlist before display and again before `openUrl` — an OSC 8 parameter is never rendered, which makes it the easier place to hide a hostile host, not a trusted one. The wrapped-display fallback is kept for CLI versions that print a bare URL. **A rejected code hung the flow.** On a bad paste the CLI prints `OAuth error: Invalid code…` / `Press Enter to retry.` and blocks on stdin instead of exiting; nothing recognised that, so the exec sat until the 15-minute timeout with the UI still saying "Finishing sign-in". Given the first bug handed the user a truncated URL, an invalid code was the likely first outcome. The streamed output is now scanned for that message, `claude-token-code-rejected` reopens the input with an explanation, and the Enter is sent so the next code has a prompt to land in — bounded by MAX_CODE_ATTEMPTS, after which the flow reports a failure. An undeterminable exec exit status is logged rather than silently read as success. **A wrapped token was rejected *and* leaked.** `stty cols` fails silently, and an 80-column fallback splits the ~103 character token across two lines: the parser saw a too-short fragment and failed, while the redactor masked the first line — which carries the `sk-ant-` marker — and printed the second, the tail of a live credential, to the UI in clear. `scan_credential_body` now reassembles a run across hard wraps and both the parser and the redactor use it, so they cannot disagree about where a credential ends. A join only happens across a break at a plausible terminal margin (>= 40 columns) and only for a run not already long enough to be a whole credential — without that second guard a repainting TUI welds one frame's token onto the next frame's first word. The length floor is applied to the reassembled body, so a fragment is still never accepted. Also: `stty cols` raised 200 -> 400 (the URL alone needs ~350), and `ESC ( B` is handled as the three-byte charset designation it is — it prefixes every repaint frame, and treating it as two bytes emitted a stray `B` that could glue itself onto a token and make the parser refuse it. `submit_claude_token_code`'s single-write behaviour is unchanged. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KSP2KNPhuWKQ4DL5TZEn3k	2026-08-10 09:57:16 -07:00
shadow-testandClaude Opus 5	2de00b3c55	Fix review findings: secrets in snapshots, URL spoofing, migration data loss ... Adversarial review of the branch produced findings across four areas. This addresses them, plus the Windows CI environment. Secrets. commit_container_snapshot baked the container's full env into the per-project snapshot image, so the shared OAuth token — and the AWS keys, git token and gateway master key — outlived revocation and were readable via docker inspect. Verified against Engine 29.6 that a commit body's config merges over the container's: keys cannot be dropped but can be overwritten, so all of them now commit as KEY=. clear_claude_token additionally rewrites images from earlier builds and reports honestly when a tag could not be rewritten. The recommendation to move the token out of env entirely was not taken, with reasoning: apiKeyHelper is a different auth method that outranks CLAUDE_CODE_OAUTH_TOKEN rather than a transport for it, and no file-based delivery exists. The durable exposure — the image — is what is closed here. Separately noted, not fixed: entrypoint.sh captures the token into the scheduler's .env inside the persisted volume. URL spoofing. Three call sites reached openUrl with container-controlled strings, one of which the review missed (the WebLinksAddon handler). The sign-in URL was scraped from container output with a longest-match tie-break and no userinfo check, so claude.ai@evil.tld rendered as "claude.ai…" in a truncating element. There is now one sanitizer in front of every sink — scheme allowlist, no userinfo, C0/C1 and quote rejection, host allowlist for the sign-in case, first-match — and the origin renders un-truncated. The toast is keyed so a changed URL remounts, closing a bait-and-switch where the user read one URL and clicked another. Migration. The rollback pin was best-effort: a tag failure was logged and the migration continued past remove_container, after which the final commit overwrote the only copy of the old system layer. It now aborts before anything destructive and reads the tag back. /var was destroyed while the ordinary recreate path preserves it — making the "safe" alternative to Reset more destructive than Reset's alternative; data-bearing subtrees are now detected and disclosed in the pre-flight rather than copied, since tarring a live database onto a different base's packages is a corruption risk. resume_migration now verifies the migration-state label instead of reporting success for a container that never swapped. dismiss actually resolves the record rather than leaving the feature permanently refusing to migrate. Start and Reset are guarded while a migration is live. Lifecycle. The gateway no longer publishes on 0.0.0.0 — bind address and advertised URL are derived together so they cannot drift. Disabling it now stops it. App exit runs teardown concurrently under a budget with a visible shutting-down state instead of blocking for minutes. Auto-starts retry when Docker is not up yet, and the polling-recovery path now reconciles, so interrupted migrations are still recovered. Auth-bridge forwards are capped, closing a container-driven fd exhaustion. Windows CI. build-windows failed on this branch with "linker link.exe not found". The runner had no MSVC build tools and the workflow assumed a hand-provisioned machine, so a bare runner registers, accepts jobs and fails at link time after downloading the whole crate graph. The job now installs the VC++ workload when vswhere cannot find it, matching how it already conditionally installs Rust and Node. 192 Rust tests, 274 frontend tests, both builds clean, zero warnings. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 19:35:39 -07:00
shadow-testandClaude Opus 5	d42b741337	Migrate a project onto a new base image without losing its volumes ... Projects were pinned to the image they were first created from. Both create paths preferred triple-c-snapshot-<id>:latest whenever it existed, and container_needs_recreation compared the container's live image against the triple-c.image label — which create_container wrote from the same image it created from. A tautology that could never fire. The only escape was Reset, which calls remove_project_volumes and destroys the login, skills and transcripts. Measured consequences on this host: real projects are missing socat (so the auth bridge cannot tunnel) and bubblewrap (so sandbox mode does not work), plus Mission Control and triple-c-sso-refresh, and sit 61 packages behind the base including ca-certificates, openssl and curl. Detection. create_container now writes triple-c.base-image-id (the image ID, not RepoDigests, which local-built and custom images do not have) and triple-c.create-image. container_needs_recreation takes the expected create-image and compares against the latter, so the check means something. base-image-id is deliberately NOT compared: a base bump would otherwise silently recreate from the snapshot, consuming the "you should migrate" signal without migrating. Staleness is surfaced, never acted on automatically. Migration keeps the volumes. /home/claude and ~/.claude are volumes and the image's copy is seed-only — permanently masked after first mount — so the login, ~/.claude.json, skills, transcripts, scheduler tasks, SSH keys, cargo, uv, ruff and Claude Code itself re-attach untouched. Only root-level state is rebuilt: apt packages are replayed against the new base rather than copied, so no stale libc is dragged forward, and /usr/local, /opt and the non-bind-mounted parts of /workspace are copied verbatim with tar --skip-old-files so they can never clobber a newer base binary. docker diff is not used: on a snapshot-derived container it reports only changes since the last commit. Raw image-vs-image diffing is filtered through dpkg ownership because it otherwise lies — 8,677 raw path differences on a real project reduced to 2 genuinely user-authored files, both loose /workspace-root files. Crash safety. snapshot:latest keeps pointing at the old image until the final commit, so any crash before it self-heals on next start. Later crashes are caught by reconcile_project_statuses. The rollback pin is a docker tag: 0.057s and 0 bytes. Rollback restores the system layer only — volumes are never touched — and the UI says so rather than implying a time machine. Fixes an infinite recreation loop shipped with the MCP removal. docker commit propagates labels to the image, so a container created from a snapshot inherited its non-empty triple-c.mcp-fingerprint and the one-shot shim recreated it again on every start, forever. Lineage labels are now always written explicitly. Documents the second, separate bug this uncovered: Dockerfile changes under /home/claude never reach an existing project, migration or not, because the volume masks them. Anything that must stay upgradable belongs in /usr/local/bin or /opt, or must be seeded by entrypoint.sh. 145 Rust tests, 227 frontend tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 18:19:12 -07:00
shadow-testandClaude Opus 5	cc5f691677	Add llama.cpp backend, model gateway, URL relay and browser view ... Four features, plus a latent bug fix. llama.cpp backend. Claude Code only ever speaks the Anthropic Messages API — confirmed empirically by pointing it at a logging server, which received POST /v1/messages?beta=true. llama-server implements that natively (verified in its README, alongside --port default 8080), so this is a plain base-URL backend with no translation shim, the same shape as Ollama. Its --api-key defaults to none, so the auth token is a placeholder Claude Code requires and llama-server ignores. Model alias fix. ANTHROPIC_DEFAULT_HAIKU_MODEL is documented as "also used for background functionality", and Triple-C set none of the alias vars. So on every custom-endpoint backend, Claude Code resolved `haiku` to an Anthropic model id and sent it to a local server that does not have it — background features failed silently. All four ANTHROPIC_DEFAULT_{OPUS,SONNET,HAIKU,FABLE}_MODEL vars are now pinned to the backend's configured model, with an optional Haiku override, and blanked for Anthropic and Bedrock so those keep Claude Code's defaults. The deprecated ANTHROPIC_SMALL_FAST_MODEL is never emitted. Existing Ollama and OpenAI-Compatible containers are recreated once so the new env reaches them; the snapshot is preserved. Model gateway. Optional LiteLLM sibling container, off by default, mirroring stt.rs — this is what makes real OpenAI usable, since api.openai.com has no /v1/messages. Pinned to v1.96.0 by tag and digest: the 1.82.7/1.82.8 malware was PyPI-only and never affected the official images, which is precisely why this builds FROM the image rather than pip-installing, but 1.84.0 is still the floor for proxy CVEs (API-key SQLi, Host-header auth bypass, MCP auth bypass). Binds 0.0.0.0 because project containers consume it, and therefore always sets a master_key — LiteLLM without one accepts any key. The provider key lives in the OS keychain and is uploaded into a volume, never an image layer or label. URL relay. A container-side xdg-open/BROWSER shim opens URLs in the host's browser. Uses an OSC sequence to /dev/tty rather than a printed sentinel, because the shim usually runs as a grandchild of a process capturing its children's output. Degrades to printing the URL when no terminal is attached, so scheduled tasks do not hang. Only http/https, with control characters rejected before new URL() — which strips newlines, so java\nscript: would otherwise parse as javascript:. Nothing auto-opens; the user confirms. The web terminal shows a tap-to-open banner instead, since that browser may be a phone across a tunnel. Browser view. A Project Home tab that watches and takes over the browser Claude drives with Playwright, using Playwright's own dashboard. Zero image cost — Playwright stays user-installed. It does not reuse the auth bridge's PortForward, which binds an unauthenticated port: correct for a throwaway OAuth listener, wrong for mouse and keyboard control of a browser in a passwordless-sudo container. Instead a token-gated loopback proxy checks Host, then token or a forbidden-header origin signal, before a byte reaches the container. Host ports are confined to 47820..=47827 so CSP frame-src can enumerate them rather than widening to a wildcard, with a test asserting the two agree. 188 frontend tests, 107 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 16:55:28 -07:00
shadow-testandClaude Opus 5	7d00390e1f	Add scheduled task creation, and stop a bad cron unscheduling everything ... Completes the Automation tab: it could list, toggle, run, log and remove tasks but not create them, so task creation still meant dropping to the CLI. Adds add_scheduled_task and update_scheduled_task, plus a task editor with cron presets and a plain-English reading of the expression. Every field is free user text, so all of it goes to the scheduler as a bare argv vector through bollard — no shell, no quoting. Validation is shape-only rather than metacharacter scrubbing: length caps, no control characters in single-line fields, no leading-dash name, absolute working_dir. Verified by round-tripping a prompt containing `; rm -rf /`, `$(id)`, backticks and newlines: it landed byte-for-byte in the task JSON with nothing executed. The scheduler CLI has no `edit`, so update is add-then-remove with the add first — a rejected edit leaves the original intact. The new id is surfaced in the editor rather than hidden. Root-cause fix, and the more serious half of this commit: triple-c-scheduler never validated --schedule, and rebuild_crontab regenerates the entire crontab and pipes it to `crontab`, which rejects the whole file if any line is malformed — with the error thrown away by `2>/dev/null || true`. A single bad schedule therefore silently unscheduled every other task in the container while reporting success. Reproduced directly. It matters because the global CLAUDE.md tells Claude to drive this CLI, so Claude could trigger it unprompted. `add` now validates the expression and exits non-zero, and rebuild_crontab reports a rejected crontab instead of swallowing it, keeping the offending file for inspection. Verified against the real CLI in this container: a bad schedule is refused without disturbing an existing task's crontab entry, and `0 9 * * 1-5`, `*/30 * * * *`, `0,30 8-17 * * *` and `0 0 1 1 *` are all still accepted. The Rust layer validates independently, agreeing with vixie cron on 23 probed expressions including `1/2` and `*/0` being invalid. 121 frontend tests, 44 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 12:20:52 -07:00
shadow-testandClaude Opus 5	d95ba54a69	Add shared-auth-token UI and make cancelling actually cancel ... UI for the shared Claude token: a Settings section showing token state with Authenticate and Revoke, an acquisition modal built on the shared Modal (sign-in link handed to the host browser via the opener plugin, plus the code input that answers `setup-token`'s stdin prompt — the flow cannot complete without it), and a per-project opt-out toggle shown only for the Anthropic backend. Cancellation: acquire_claude_token previously had only two exits, completion and a 15-minute timeout, and held the single-flight guard for the whole time. Closing the dialog therefore locked the user out of retrying for up to 15 minutes. Adds cancel_claude_token, backed by a oneshot claimed and released in lockstep with the input guard, selected on in the run loop so it wins the race and tears the exec down. The dialog's Cancel now calls it and closes either way. Also refreshes CLAUDE.md, which had drifted: it documented the deleted ProjectCard, and asserted that new IPC commands need permission grants in capabilities/default.json — they do not, that file covers plugin commands only. Adds the conventions that would otherwise bite: container_needs_recreation() is purely label-based and never diffs env, so container-affecting state needs its own label; and #[serde(default)] on a bool yields false regardless of intent. Corrects the claim that Reset preserves credentials. Reset calls remove_project_volumes, which deletes both the home and claude-config volumes, so it wipes ~/.claude, the OAuth token, installed skills and session transcripts. 84 frontend tests, 34 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 11:49:03 -07:00
shadow-testandClaude Opus 5	01a2f6aec8	Add Project Home, Auth Bridge, shared auth token, and Tier-1 polish ... Project Home (DESIGN-REVIEW §B2): the project is promoted from a 280px sidebar card to a first-class main-area view. ProjectCard.tsx (1,257 lines) is replaced by a select-only ProjectRow plus tabs for Overview, Sessions, Automation, Config and Files. The PortMappings, FileManager and ContainerProgress modals are absorbed rather than reimplemented. Config gains a Saved/Saving/Failed indicator — save-on-blur failures previously reached only console.error. Tier-1 polish (DESIGN-REVIEW §A): new elevation, muted-accent, disabled and focus-ring tokens; a global :focus-visible ring with every focus:outline-none removed; filled buttons moved to --accent-emphasis and white-on-success toggles retired, fixing three WCAG AA failures (2.1:1, 2.5:1, 2.4:1); a shared Modal primitive with role="dialog", focus trap and restore, adopted by all remaining modals; status indicators that carry a glyph and word rather than colour alone. Ctrl+Shift+W closes a tab, deliberately not Ctrl+W — that is readline's kill-word, used constantly in the terminal this app is built around. Auth Bridge: a general loopback-callback bridge so browser logins run inside a container (aws sso login, Concourse fly login, claude login) can complete against the host browser. Listeners are discovered from /proc/net/tcp{,6} — ss/netstat/lsof are absent from the image — bound on host 127.0.0.1 only, and tunnelled in over the Docker API via socat, which keeps working on Docker Desktop where container IPs are not routable. Falls back to [::1] because Node resolves localhost to IPv6 first, so claude login often binds ::1 alone. Opt-in per project. This extracts create_attached_exec() and moves the existing terminal session path onto it, so there is one attached-exec implementation rather than two. Shared auth token: `claude setup-token` is run in a container, the token is stored in the OS keychain and injected as CLAUDE_CODE_OAUTH_TOKEN into Anthropic-backend projects. Contrary to the initial design note, setup-token uses an Anthropic-hosted redirect and blocks on a stdin paste prompt rather than a loopback callback, so a stdin command is required for the flow to complete. The token is never logged, never returned to the frontend, and is redacted from the streamed output with a stateful matcher that withholds any tail that could still grow into a secret. Change detection uses a random rotation id rather than a hash, since a hash in a docker-inspect readable label would be an offline verification oracle. Frontend 33 -> 51 tests; Rust 34 tests. Both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 11:35:42 -07:00
shadow-testandClaude Opus 5	0ac4e5030c	Add permission modes and container introspection backend ... Permission modes: replaces the binary full_permissions flag with a PermissionMode enum (Plan/Default/AcceptEdits/Bypass). Flag mapping is defined once in PermissionMode::cli_args() and used by the terminal, the web terminal, and the scheduler: Plan -> --permission-mode plan Default -> (no flag) AcceptEdits -> --permission-mode acceptEdits Bypass -> --dangerously-skip-permissions Choices verified against `claude --permission-mode` on 2.1.226. full_permissions is retained and effective_permission_mode() falls back to it, so existing projects.json needs no migration. Bug fix: triple-c-task-runner ran `claude -p ... --dangerously-skip- permissions` unconditionally, ignoring the project's setting entirely. It now reads TRIPLE_C_PERMISSION_MODE, which is injected into the container, added to the reserved env blocklist, propagated through the entrypoint's cron env filter, and tracked by a new triple-c.permission-mode label so a change forces recreation. Introspection: new commands/inspect_commands.rs exposes read-only views into the container over docker exec — Claude sessions (parsed from ~/.claude/projects/<cwd>/<uuid>.jsonl), installed capabilities (skills, agents, commands, hooks, plugins, natively-configured MCP servers), and the triple-c-scheduler task list, logs and notifications. Task/session ids are validated against a strict allowlist and every parameterized call runs as a bare argv vector via bollard, so no shell is involved. Stopped containers return empty results rather than errors. No UI yet; that lands with the Project Home view. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 10:51:34 -07:00
shadow-testandClaude Opus 5	d0bb631d4d	Remove MCP backend, entrypoint injection, and docs; add migration shim ... Completes the removal begun in the previous commit. Backend: deletes models/mcp_server.rs, storage/mcp_store.rs and commands/mcp_commands.rs, the McpStore on AppState, the four IPC handlers, Project::enabled_mcp_servers, build_mcp_servers_json(), compute_mcp_fingerprint(), the MCP_SERVERS_JSON env injection, the mcp-fingerprint label, and the whole MCP container lifecycle. create_container() and container_needs_recreation() lose their mcp_servers/network_name parameters. Container: entrypoint.sh no longer merges MCP_SERVERS_JSON into ~/.claude.json. MCP_SERVERS_JSON stays in the reserved env blocklist. Security: the Docker socket is no longer auto-mounted for stdio+Docker MCP servers — it now mounts only when allow_docker_access is set. Migration: old containers were created with network_mode=triple-c-net-<projectId> and refuse to start once that network is gone. docker/network.rs becomes docker/legacy_cleanup.rs with label-driven, best-effort removal of leftover MCP containers and the per-project network, called on both delete and recreate. container_needs_recreation() now forces a rebuild for any container carrying a non-empty triple-c.mcp-fingerprint label or attached to a triple-c-net-* network, moving it onto the default bridge. Both can be dropped a release later. Docs: drops the MCP sections from README/HOW-TO-USE/TECHNICAL and adds a short note pointing at Claude Code's native `claude mcp` / `/mcp` / .mcp.json instead. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 10:31:18 -07:00
shadow-testandClaude Opus 4.8	26adccce5b	Rename backup archive root so extraction dir mode isn't clobbered ... The transform used `s,^\./,workspace/,`, which rewrites the workspace *contents* (`./foo` -> `workspace/foo`) but leaves tar's root member as a bare `./`. That `./` entry carries the source root's mode/mtime, and on extraction tar stamps them onto the extraction directory itself. Match the leading `.` instead (`s,^\.,workspace,`) so the root member is renamed `./` -> `workspace`, giving the archive a proper `workspace/` directory entry and no bare `./`. The extraction directory is left untouched. Contents, hidden files, excludes, symlink targets and the `flags=rh` hardlink handling are unchanged. Verified in-container: archive top level is exactly `workspace/` + `home-claude/`, no `./` member, node_modules excluded, extraction into a 0755 dir leaves it 0755, workspace/.git preserved. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:33:02 -07:00
shadow-testandClaude Opus 4.8	5cd528a4ef	Use flags=rh so intra-workspace hardlinks survive the transform ... Review caught that `flags=r` disables rewriting of both symlink AND hardlink target names. Leaving symlink targets alone is intended, but a hardlink's stored target is an archive-internal reference to another member's name — when member names become `workspace/...` but the hardlink target stays `./hard_link`, extraction fails hard: tar: workspace/file.txt: Cannot hard link to './hard_link': No such file or directory `flags=rh` rewrites regular member names and hardlink target names together (keeping the pair consistent) while still leaving symlink targets untouched. Verified in-container: extract exit 0, symlink target preserved, hardlink pair shares one inode, nesting under workspace/ intact. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:22:14 -07:00
shadow-testandClaude Opus 4.8	c3fc029b1d	Nest workspace under workspace/ in project backup ... The backup archive placed the workspace at the archive root (`./...`) while the sanitized home config sat under `home-claude/`. On extraction the workspace files scattered loose into the extraction directory and only `home-claude/` showed up as a distinct folder, so the backup read as "config only, workspace missing" — and some archive viewers didn't surface the root-level entries at all. Add `--transform='flags=r;s,^\./,workspace/,'` so the workspace nests under `workspace/`, parallel to `home-claude/`. `flags=r` scopes the rewrite to member names only, leaving symlink targets (relative and absolute) intact. Excludes still match the pre-transform names. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:18:08 -07:00
shadow-testandClaude Opus 4.8	01a8f5c503	Apply remaining review findings (L-e, L-f) ... - L-e: route terminal file drops purely by a bounds hit-test instead of the `active` flag. Inactive panes are display:none (zero-size rect) so they never match; a zero-size guard makes that explicit. Correct for the current tabbed layout and future-proof for split panes, where a drop on a visible-but-unfocused pane previously matched no handler. - L-f: stream the dropped file straight into the upload tar inside a blocking task (new exec::upload_host_file_to_container) instead of reading the whole file into a Vec and then re-packing it. Peak memory drops from ~2x to ~1x the file size, and the synchronous file IO no longer runs on the async worker. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 15:05:25 -07:00
shadow-testandClaude Opus 4.8	0945e21eb1	Address second review pass: fix start-time race + minor cleanups ... - M1 (race): don't mount the host AWS dir for static-credential Bedrock. sync_bedrock_credentials() is the sole writer of ~/.aws/credentials in that mode, and mounting /tmp/.host-aws let the entrypoint's `rm -rf ~/.aws; cp -a` race that write at startup (only when a global aws_config_path was also set). Static keys + AWS_REGION env are self-sufficient and don't need the host config, so skipping the mount removes the dual-writer entirely. - L-a: exit codes are now read via wait_for_exec_exit(), which polls inspect_exec until the exec reports finished, so a non-zero tar/cred exit isn't missed by reading exit_code too early. The backup only fails on a definitively non-zero code (falls back to the empty-output check if undeterminable). - L-b: fixed two comments that referenced the old write_bedrock_static_credentials name (now sync_bedrock_credentials). - L-c: entrypoint only rewrites ~/.claude.json when awsAuthRefresh is actually present, avoiding a needless jq reformat on every non-SSO start. - L-d: backup script traps EXIT to remove its mktemp staging dir even when tar fails, so failed backups don't accumulate temp dirs (with the sanitized config copy) in the container. L-e (drop routing) is a non-issue: the layout is tabbed, so only one terminal pane is ever visible; the active-guard routing is correct. Verified the race fix, trap cleanup, grep guard, and exit-code polling. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:59:48 -07:00
shadow-testandClaude Opus 4.8	d65872dc94	Address remaining review items: L4/M1 + L2/L5 cleanup ... - L4: sync_bedrock_credentials (renamed from write_bedrock_static_ credentials) now also clears a stale ~/.aws/credentials when the project no longer uses static-credential Bedrock, so static keys don't linger unused in the persistent home volume after switching backends. Skipped when /tmp/.host-aws is mounted (host-managed ~/.aws). HOME is also set explicitly on the exec env for robustness. - M1: the Backup button now has a tooltip and the success toast notes that the archive includes MCP/config which may contain MCP-embedded API keys (OAuth tokens are excluded) — keep it private. - L2: backup now uses async file IO (tokio::fs::File + AsyncWriteExt, tokio::fs::remove_file) instead of blocking std::fs between awaits; dropped-file reads use tokio::fs::metadata/read. - L5: upload_host_file_to_terminal explicitly `mkdir -p`s /tmp/triple-c-drops instead of relying on Docker's tar extractor to create the parent dir. Verified L4 cleanup guard, L5 mkdir, async IO, and exit-code paths against real containers. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:37:33 -07:00
shadow-testandClaude Opus 4.8	edf0698774	Address PR review: backup correctness/security + drop hardening ... Fixes from the code review of this branch: - Backup requires a running container (it runs via `docker exec`, which can't run on a stopped one). Removed the misleading "Backup" button from the stopped-project actions, added an explicit running check with a clear error, and corrected the doc comment. (H1) - jq sanitization fallback no longer leaks secrets: if ~/.claude.json can't be parsed, the backup substitutes an empty object and warns to stderr instead of copying the raw file (which held primaryApiKey / oauthAccount). Verified the raw key never reaches the archive. (H2) - Dropped-file paths typed into the terminal are now always single-quoted (with '\'' escaping), not only when they contain whitespace — a name like `foo$(whoami).txt` was previously sent raw into the shell. (M2) - write_bedrock_static_credentials checks the exec exit code via the new exec_oneshot_env_status and fails loudly on a write/chmod error instead of silently reporting success. exec_oneshot keeps its ignore-exit-code behavior so list_container_files is unaffected. (M4) - Backup removes a partial/truncated archive on any stream error and treats a non-zero tar exit code as failure (a truncated gzip was previously reported as success). (L1) - Dropped files are capped at 256 MiB to avoid ballooning host RAM (the file is read fully into memory then re-tarred). (M3) - Stopped excluding .git/objects from the backup so git history, including unpushed commits, is preserved faithfully. (L3) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:28:00 -07:00
shadow-testandClaude Opus 4.8	84e0bdf7b4	Add file drag-and-drop onto the terminal ... Drop files onto a terminal pane and they're copied into the container and their in-container paths typed into the prompt, so Claude Code can read them for reference — mirroring the existing image-paste flow. Backend: upload_host_file_to_terminal reads the dropped host file and writes it under /tmp/triple-c-drops/<name> in the session's container, returning that path. Rejects directories and unreadable paths. Frontend: TerminalView subscribes to Tauri's webview onDragDropEvent (OS file drops are intercepted at the webview level, so HTML5 ondrop wouldn't expose paths). The window-wide event is guarded by the pane's `active` flag plus a bounds hit-test so a drop only affects the terminal it landed on; multiple files are uploaded and their paths inserted space-separated (quoted when they contain spaces). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:11:09 -07:00
shadow-testandClaude Opus 4.8	10e689eaa6	Include sanitized home config in project backup ... Extends download_container_backup to also capture the container's home config so MCP servers, settings, and skills set up directly via Claude Code (stored in ~/.claude.json / ~/.claude, on the home/config volumes that a Reset wipes) survive a backup/restore cycle. Secrets are stripped per the "exclude secrets" choice: ~/.claude.json is filtered through jq to drop primaryApiKey/oauthAccount/customApiKeyResponses (mcpServers and settings are kept), and ~/.claude/.credentials.json (the OAuth tokens) is omitted. Staged config is archived under home-claude/ in the tarball. Verified on the Ubuntu/jq container base. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:04:19 -07:00
shadow-testandClaude Opus 4.8	d07dcdfea9	Add "Backup" action to download a project's /workspace as .tar.gz ... Adds a manual backup button on each project card (next to Start/Reset when stopped, and next to Files when running) that saves a gzipped tarball of the container's /workspace to a host path via the native save dialog. Backend: download_container_backup runs `tar czf -` inside the container (so excludes + compression happen there rather than streaming a 16 GB workspace) and pipes stdout straight to the chosen file. Regenerable build artifacts (node_modules, target, .git/objects) are excluded so the archive stays restore-sized. Returns bytes written; stderr is captured for error reporting and a zero-byte result is treated as failure. Works whether the container is running or stopped (only requires that it exists). Verified on the Ubuntu/GNU-tar container base. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 13:48:04 -07:00
shadow-testandClaude Opus 4.8	424ab04ca8	Fix stale AWS/Bedrock auth carrying over on backend switch ... When a project switched backends (e.g. Bedrock -> Anthropic), the recreated container kept authenticating against Bedrock, and SSO kept firing after switching away. Three root causes, all fixed: 1. Recreation builds the new container from a `docker commit` snapshot. commit always bakes the previous container's full ENV into the image (an empty commit Config does NOT strip it, and the commit API cannot remove env). So CLAUDE_CODE_USE_BEDROCK=1 / AWS_* survived into the new container. Fix: create_container now explicitly clears every managed auth key the active backend does not set (MANAGED_AUTH_KEYS), so create-time env overrides the stale baked-in values. 2. awsAuthRefresh was written into ~/.claude.json (persisted home volume) and never removed, so Claude Code kept invoking triple-c-sso-refresh after switching to a non-SSO backend. Fix: entrypoint now deletes awsAuthRefresh when AWS_SSO_AUTH_REFRESH_CMD is unset, idempotent both ways. 3. Static/session AWS creds were baked into Config.Env at create time, so a stop/start kept stale creds and rotated keys never refreshed without a full recreation. Fix: static creds are no longer injected as env vars; write_bedrock_static_credentials() writes ~/.aws/credentials (0600, secrets via exec env not argv) on every start, and removes a stale ~/.aws/config left from a prior profile/SSO session. Static creds also dropped from the bedrock fingerprint so a key rotation refreshes in place instead of forcing recreation. Adds exec_oneshot_env() for env-carrying one-shot execs. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 13:34:43 -07:00
shadow-testandClaude Opus 4.7	5b1c801cf1	Add global backend defaults with runtime fallback ... New fields: GlobalAwsSettings.default_model_id, plus GlobalOllamaSettings and GlobalOpenAiCompatibleSettings (base_url + default_model_id each). When a per-project base_url or model_id is blank, the container env vars and config fingerprints fall back to the global value. Container recreation is triggered whenever the resolved value changes, so editing a global default updates existing projects on next start. UI: added the new fields to AwsSettings and two new global settings components, slotted into the Backends accordion. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-24 08:49:06 -07:00
shadow-testandClaude Opus 4.7	ee68cc820c	Add Docker install helper for first-run setup ... When Docker isn't detected on startup, surface a dialog offering a one-click install (pkexec + get.docker.com on Linux, brew cask on macOS, winget on Windows) with a graceful fallback to manual steps and a link to official documentation. Install output streams back to the UI via a tauri event. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-04-24 10:18:46 -07:00
shadow-testandClaude Opus 4.6	d6ac3ae6c6	Add Claude Code settings infrastructure, TUI mode, session naming, and global defaults ... Adds first-class support for Claude Code CLI features (2.1.71-2.1.110): - New ClaudeCodeSettings struct with per-project and global defaults for TUI mode, effort level, focus mode, thinking summaries, session recap, auto-scroll, env scrub, and 1-hour prompt caching - Settings injected as env vars (CLAUDE_CODE_NO_FLICKER, etc.) and ~/.claude/settings.json entries via entrypoint.sh merge block - New ClaudeCodeSettingsModal component for configuring settings - Session naming support (-n flag passed to claude CLI, shown in tabs) - Relaxed reserved prefix filter: CLAUDE_CODE_* env vars now allowed in custom env vars UI for power users - Global SSH key path, git name, and git email now used as fallbacks when per-project values are not set, with UI in SettingsPanel - Fingerprint-based change detection triggers container recreation when Claude Code settings change - Updated README, HOW-TO-USE, and CLAUDE.md documentation Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-16 08:46:03 -07:00
shadow-testandClaude Opus 4.6	ef67b447b3	Pre-validate AWS SSO session on host during container startup ... For Bedrock Profile projects, SSO credentials are now checked and refreshed on the host before the container starts, so the entrypoint copies already-valid tokens. This eliminates the delay where users had to wait for the terminal to open before being prompted to login. The terminal-time fallback remains for mid-session credential expiry. Also consolidates duplicated profile resolution logic into a shared helper in aws_commands. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-15 06:54:59 -07:00
shadow-testandClaude Opus 4.6	532de77927	Add speech-to-text feature using Faster Whisper container ... Adds a mic button to the terminal UI that captures speech, transcribes it via a Faster Whisper sidecar container, and injects the text into the terminal input. Includes settings panel for model selection (tiny/small/medium), port config, and container lifecycle management. - stt-container/: Dockerfile + FastAPI server for Whisper transcription - Rust backend: STT container management, transcribe_audio IPC command - Frontend: useSTT hook, SttButton, SttSettings, WAV encoder - CI: Gitea Actions workflow for multi-arch STT image builds Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-12 20:02:39 -07:00
shadow-testandClaude Opus 4.6	922543cc04	Add web terminal for remote tablet/phone access to project terminals ... Adds an axum HTTP+WebSocket server that runs alongside the Tauri app, serving a standalone xterm.js-based terminal UI accessible from any browser on the local network. Shares the existing ExecSessionManager via Arc-wrapped stores, with token-based authentication and automatic session cleanup on disconnect. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-03-17 19:31:16 -07:00
shadow-testandClaude Opus 4.6	b17c759bd6	Fix remaining repo.anhonesthost.net references in user-facing code ... - help_commands.rs: fetch HOW-TO-USE.md from GitHub raw instead of Gitea - DockerSettings.tsx: display GHCR image address in settings UI - HOW-TO-USE.md: update registry description to ghcr.io Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 11:31:46 -07:00
shadow-testandClaude Opus 4.6	bab1df1c57	Switch distribution from Gitea to GitHub/GHCR ... Work VPN blocks repo.anhonesthost.net, breaking update checks and image pulls. Move all user-facing distribution to GitHub (releases API) and GHCR (container images) while keeping Gitea as the source of truth for development and CI. - CI: push container images to GHCR alongside Gitea registry - App updates: switch releases API to api.github.com, filter by asset filename instead of tag suffix for unified releases - Image updates: switch registry to ghcr.io with anonymous token auth - Container pull: point REGISTRY_IMAGE to ghcr.io/shadowdao/triple-c-sandbox - Rename GiteaRelease/GiteaAsset structs to GitHubRelease/GitHubAsset Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 10:55:41 -07:00
shadow-testandClaude Opus 4.6	b952b8e8de	Add per-project full permissions toggle for --dangerously-skip-permissions ... New projects default to standard permission mode (Claude asks before acting). Existing projects default to full permissions ON, preserving current behavior. UI toggle uses red/caution styling to highlight the security implications. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 08:58:13 -07:00
shadow-testandClaude Opus 4.6	d7d7a83aec	Rename LiteLLM backend to OpenAI Compatible ... Reflects that this backend works with any OpenAI API-compatible endpoint (LiteLLM, OpenRouter, vLLM, text-generation-inference, LocalAI, etc.), not just LiteLLM. Includes serde aliases for backward compatibility with existing projects.json files. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 06:16:05 -07:00
shadow-testandClaude Opus 4.6	27007b90e3	Fetch help content from repo, add TOC and marketplace troubleshooting ... Help dialog now fetches HOW-TO-USE.md live from the gitea repo on open, falling back to the compile-time embedded copy when offline. Content is cached for the session. Removes the ~600-line hardcoded markdown constant from HelpDialog.tsx in favor of a single source of truth. Adds a Table of Contents with anchor links for quick navigation and a new troubleshooting entry for the "Failed to install Anthropic marketplace" error with the jq fix. Markdown renderer updated to support anchor links and header id attributes. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 11:00:59 -07:00
shadow-testandClaude Opus 4.6	d2c1c2108a	Fix update checker to use full semver comparison and correct platform filtering ... The version comparison was only comparing the patch number, ignoring major and minor versions. This meant 0.1.75 (patch=75) appeared "newer" than 0.2.1 (patch=1), and updates within 0.2.x were missed entirely. Also fixed platform filtering to handle -mac suffix (previously only filtered -win, so Linux users would see macOS releases too). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 09:45:43 -07:00
shadow-testandClaude Opus 4.6	38082059a5	Rename AuthMode to Backend, fix LiteLLM variant typo, add image update alerts, clean up Settings ... - Fix serde deserialization error: TypeScript sent "lit_llm" but Rust expected "lite_llm" - Rename AuthMode enum to Backend across Rust and TypeScript (with serde alias for backward compat) - Add container image update checking via registry digest comparison - Improve Settings page: fix image address display spacing, remove per-project auth section - Update UI labels from "Auth" to "Backend" throughout Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 09:26:58 -07:00
shadow-testandClaude Opus 4.6	93deab68a7	Add Ollama and LiteLLM backend support (v0.2.0) ... Add two new auth modes for projects alongside Anthropic and Bedrock: - Ollama: connect to local or remote Ollama servers via ANTHROPIC_BASE_URL - LiteLLM: connect through a LiteLLM proxy gateway to 100+ model providers Both modes inject ANTHROPIC_BASE_URL and ANTHROPIC_AUTH_TOKEN env vars into the container, with optional model override via ANTHROPIC_MODEL. LiteLLM API keys are stored securely in the OS keychain. Config changes trigger automatic container recreation via fingerprinting. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-11 13:05:52 -07:00
shadow-testandClaude Opus 4.6	2dce2993cc	Fix AWS SSO for Bedrock profile auth in containers ... SSO login was broken in containers due to three issues: the sso_session indirection format not being resolved by Claude Code's AWS SDK, SSO detection only checking sso_start_url (missing sso_session), and the OAuth callback port not being accessible from inside the container. This fix runs SSO login on the host OS (where the browser and ports work natively) by having the container emit a marker that the Tauri app detects in terminal output, triggering host-side `aws sso login`. The entrypoint also inlines sso_session properties into profile sections and injects awsAuthRefresh into Claude Code config for mid-session refresh. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-11 12:24:16 -07:00
shadow-testandClaude Opus 4.6	8c710fc7bf	Auto-pull MCP Docker images and add mode hints to MCP UI ... - Automatically pull missing Docker images for MCP servers before starting containers, with progress streamed to the container progress modal - Add contextual mode descriptions to MCP server cards explaining where commands run (project container vs separate MCP container) - Clarify that HTTP+Docker URLs are auto-generated using the container hostname on the project network, not localhost Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-10 09:51:47 -07:00
shadow-testandClaude Opus 4.6	b7585420ef	Reconcile project statuses against Docker on startup, update docs and CI ... - Add reconcile_project_statuses command that checks actual Docker container state on startup, preserving Running status for containers that are genuinely still running and resetting stale statuses to Stopped - Add is_container_running helper using Docker inspect API - Frontend calls reconciliation after Docker is confirmed available - Update TECHNICAL.md project structure, auth modes, and file listings to match current codebase - Update README.md and HOW-TO-USE.md with MCP servers, Mission Control, file manager, bash shells, clipboard/audio shims, and progress modal docs - Add workflow file self-triggers to CI path filters for build-app.yml and build.yml - Install Mission Control skills to ~/.claude/skills/ in entrypoint Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-10 08:29:06 -07:00
shadow-testandClaude Opus 4.6	bf8ef3dba1	Fix file manager listing current folder as entry within itself ... The find command included the starting directory in results (e.g., listing "workspace" inside /workspace). Replace `-not -name "."` with `-mindepth 1` which correctly excludes the starting path from output. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-06 08:38:48 -08:00
shadow-testandClaude Opus 4.6	ab16ac11e7	Add bash shell tab and file manager for running containers ... Adds two new features for running project containers: 1. Bash Shell Tab: A "Shell" button on running projects opens a plain bash -l session instead of Claude Code, useful for direct container inspection, package installation, and debugging. Tab labels show "(bash)" suffix to distinguish from Claude sessions. 2. File Manager: A "Files" button opens a modal file browser for navigating container directories, downloading files to the host, and uploading files from the host. Supports breadcrumb navigation and works with any path including those outside mounted projects. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-06 06:32:53 -08:00
shadow-testandClaude Opus 4.6	86176d8830	feat: add voice mode support via mic passthrough to container ... Enables Claude Code's /voice command inside Docker containers by capturing microphone audio in the Tauri webview and streaming it into the container via a FIFO pipe. Container: fake rec/arecord shims read PCM from a FIFO instead of a real mic. Audio bridge exec writes PCM from Tauri into the FIFO. Frontend: getUserMedia() + AudioWorklet captures 16kHz mono PCM and streams it to the container via invoke("send_audio_data"). UI: "Mic Off/On" toggle button in the terminal view. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-05 06:11:33 -08:00
shadow-testandClaude Opus 4.6	d56c6e3845	fix: validate AWS SSO session before launching Claude for Bedrock Profile auth ... When using AWS Profile auth (SSO) with Bedrock, expired SSO sessions caused Claude Code to spin indefinitely. Three root causes fixed: 1. Mount host .aws at /tmp/.host-aws (read-only) and copy to /home/claude/.aws in entrypoint, mirroring the SSH key pattern. This gives AWS CLI writable sso/cache and cli/cache directories. 2. For Bedrock Profile projects, wrap the claude command in a bash script that validates credentials via `aws sts get-caller-identity` before launch. If SSO session is expired, runs `aws sso login` with the auth URL visible and clickable in the terminal. 3. Non-SSO profiles with bad creds get a warning but Claude still starts. Non-Bedrock projects are unaffected. Note: existing containers need a rebuild to pick up the new mount path. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-04 11:41:42 -08:00
shadow-testandClaude Opus 4.6	20a07c84f2	feat: upgrade MCP to Docker-based architecture (Beta) ... Each MCP server can now run as its own Docker container on a dedicated per-project bridge network, enabling proper isolation and lifecycle management. SSE transport is removed (deprecated per MCP spec) with backward-compatible serde alias. Docker socket access is auto-enabled when stdio+Docker MCP servers are configured. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-04 10:21:05 -08:00
shadow-testandClaude Opus 4.6	625d48a6ed	feat: add MCP server support with global library and per-project toggles ... Add Model Context Protocol (MCP) server configuration support. Users can define MCP servers globally (new sidebar tab) and enable them per-project. Enabled servers are injected into containers as MCP_SERVERS_JSON env var and merged into ~/.claude.json by the entrypoint. Backend: McpServer model, McpStore (JSON + atomic writes), 4 CRUD commands, container injection with fingerprint-based recreation detection. Frontend: MCP sidebar tab, McpPanel/McpServerCard components, useMcpServers hook, per-project MCP checkboxes in ProjectCard config. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-04 08:57:12 -08:00
shadow-testandClaude Opus 4.6	1aced2d860	feat: add progress feedback during slow container starts ... Emit container-progress events from Rust at key milestones (checking image, saving state, recreating, starting, stopping) and display them in ProjectCard instead of the static "starting.../stopping..." text. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-04 07:43:01 -08:00