95 Commits

Include renames

Author	SHA1	Message	Date
shadow-testandClaude Opus 5	4fdfed7955	Bake the browser's runtime libraries into the base image ... `npx playwright install chromium` downloaded ~150 MB of browser that then died with "error while loading shared libraries: libglib-2.0.so.0" — verified, not inferred, against the current image. The image shipped none of Chromium's shared libraries, which is why `apt install google-chrome-stable` looked like the cure: apt was quietly installing the same set as Chrome's own dependencies. Installing them at runtime instead converges on the worst possible state. The libraries land in the container's writable layer, so they are re-paid after every Reset and *lost* on base-image migration, which replays apt from a manifest. The browsers ride in ~/.cache/ms-playwright, inside the home volume, and survive both — leaving a 400 MB browser present with its libraries gone. So the libraries are baked and the browsers are not: each half now lives where it already persists. The layer runs `npx --yes playwright@latest install-deps chromium` rather than a hand-written apt list. Ubuntu 24.04's 64-bit-time_t transition renamed a swathe of these packages (libasound2t64, libatk1.0-0t64, libglib2.0-0t64, …) and a new Chromium dependency would drift straight back into the launch failure this exists to prevent; letting Playwright name its own dependencies is self-maintaining. It sits immediately after Node — npx is its only prerequisite — and well above the shim COPYs, so editing a shim does not re-run it. The `--dry-run` that follows is a build-time assertion, not decoration: on a platform Playwright has no list for, `install-deps` prints a warning and returns having installed **nothing, with exit status 0**. Without the assertion that ships a broken image behind a clean build log. Measured, on a build of this file with the layer applied over an otherwise identical image: +99 packages, +334 MiB unpacked and +119 MiB compressed (2950 → 3284 MiB, 759 → 878 MiB). Two thirds of that is not reachable by trimming — libgbm1, which Chromium needs, pulls mesa-libgallium, which pulls libllvm20. A chromium-only apt list measures 247 MiB against install-deps' 341 MiB; the ~94 MiB difference is xvfb and the CJK/emoji fonts, kept because the base ships no fonts at all and every page this feature exists to display would otherwise render as tofu. Verified on real builds, both architectures: a `--platform linux/arm64` build of this file installs the same 99 packages and passes the same assertion. On the new amd64 image, `playwright install chromium` with no `--with-deps` and no `install-deps` launches headless Chromium 151.0.7922.34 and loads a page; on the old image the identical script fails on libglib-2.0.so.0. `install.rs` no longer runs `install-deps` unconditionally — that would be a minutes-long apt run for nothing on a current image. It asks `install-deps --dry-run` first and skips the install when everything is present, saying which of the two happened on the progress stream. The check is Playwright's rather than a probe of our own for library names, so check and fix cannot disagree about what the dependency set is. Note that `--dry-run` exits 0 both when everything is installed and when Playwright has no list for the platform, so the verdict is read from its output. Containers on older images stay the normal case until people migrate, and they still work: on such an image the simulation cannot even resolve the package names (the index is cleaned in every base image), which reports as "couldn't tell" and installs — the right answer. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KSP2KNPhuWKQ4DL5TZEn3k	2026-08-10 10:57:21 -07:00
shadow-testandClaude Opus 5	a5bcc462a7	Browser view: find every Playwright, and set one up in two clicks ... Detection missed the npx cache, so a Playwright installed through Claude Code's MCP setup (`npx @playwright/mcp@latest`, which unpacks into ~/.npm/_npx/<hash>/node_modules and no node_modules at all) was invisible. The probe now globs that cache alongside the existing roots and reports every root it consulted. It also read `has_bind` off whichever manifest resolved first. Verified that npm does not hoist for global installs and that the `playwright` wrapper ships no types/types.d.ts, so `npm i -g playwright` made the pane call a current build "predates browser.bind()". The probe now hops from the wrapper to its nested playwright-core. The messages no longer offer `@playwright/mcp` as a way through setup: it bundles a playwright-core that binds but never `@playwright/cli`, so that route could not have worked. It is named only for what it does do. New `install.rs` + two commands do the setup, streaming on the existing `container-progress` event and re-probing on success: * playwright + @playwright/cli into /workspace as `claude`, --no-save. /workspace is not a bind mount (projects mount at /workspace/{mount_name}), so nothing of the user's is touched, no sudo is needed, and Node resolves it from scripts in the project. * A browser, as its own action with the size stated first: apt libraries as root, then the download, then a real headless launch to prove it works. The base image ships none of Chromium's shared libraries, which is why a download could succeed and the browser still not start. Chromium and the Chrome channel are both offered — @playwright/mcp asks for `chrome` specifically. A certificate failure is reported as a container trust-store problem rather than a broken install. Installing is always user-initiated; opening the tab only probes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KSP2KNPhuWKQ4DL5TZEn3k	2026-08-10 10:15:02 -07:00
shadow-testandClaude Opus 5	2de00b3c55	Fix review findings: secrets in snapshots, URL spoofing, migration data loss ... Adversarial review of the branch produced findings across four areas. This addresses them, plus the Windows CI environment. Secrets. commit_container_snapshot baked the container's full env into the per-project snapshot image, so the shared OAuth token — and the AWS keys, git token and gateway master key — outlived revocation and were readable via docker inspect. Verified against Engine 29.6 that a commit body's config merges over the container's: keys cannot be dropped but can be overwritten, so all of them now commit as KEY=. clear_claude_token additionally rewrites images from earlier builds and reports honestly when a tag could not be rewritten. The recommendation to move the token out of env entirely was not taken, with reasoning: apiKeyHelper is a different auth method that outranks CLAUDE_CODE_OAUTH_TOKEN rather than a transport for it, and no file-based delivery exists. The durable exposure — the image — is what is closed here. Separately noted, not fixed: entrypoint.sh captures the token into the scheduler's .env inside the persisted volume. URL spoofing. Three call sites reached openUrl with container-controlled strings, one of which the review missed (the WebLinksAddon handler). The sign-in URL was scraped from container output with a longest-match tie-break and no userinfo check, so claude.ai@evil.tld rendered as "claude.ai…" in a truncating element. There is now one sanitizer in front of every sink — scheme allowlist, no userinfo, C0/C1 and quote rejection, host allowlist for the sign-in case, first-match — and the origin renders un-truncated. The toast is keyed so a changed URL remounts, closing a bait-and-switch where the user read one URL and clicked another. Migration. The rollback pin was best-effort: a tag failure was logged and the migration continued past remove_container, after which the final commit overwrote the only copy of the old system layer. It now aborts before anything destructive and reads the tag back. /var was destroyed while the ordinary recreate path preserves it — making the "safe" alternative to Reset more destructive than Reset's alternative; data-bearing subtrees are now detected and disclosed in the pre-flight rather than copied, since tarring a live database onto a different base's packages is a corruption risk. resume_migration now verifies the migration-state label instead of reporting success for a container that never swapped. dismiss actually resolves the record rather than leaving the feature permanently refusing to migrate. Start and Reset are guarded while a migration is live. Lifecycle. The gateway no longer publishes on 0.0.0.0 — bind address and advertised URL are derived together so they cannot drift. Disabling it now stops it. App exit runs teardown concurrently under a budget with a visible shutting-down state instead of blocking for minutes. Auto-starts retry when Docker is not up yet, and the polling-recovery path now reconciles, so interrupted migrations are still recovered. Auth-bridge forwards are capped, closing a container-driven fd exhaustion. Windows CI. build-windows failed on this branch with "linker link.exe not found". The runner had no MSVC build tools and the workflow assumed a hand-provisioned machine, so a bare runner registers, accepts jobs and fails at link time after downloading the whole crate graph. The job now installs the VC++ workload when vswhere cannot find it, matching how it already conditionally installs Rust and Node. 192 Rust tests, 274 frontend tests, both builds clean, zero warnings. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 19:35:39 -07:00
shadow-testandClaude Opus 5	eb1324cb16	Fix pre-auth bypass in the browser-view proxy ... read_head computed the head terminator index and discarded it, returning the whole receive buffer. authorize() then split that buffer on CRLF and treated every colon-bearing line as a header, last occurrence winning — so any bytes a client sent after the head were promoted to headers. A cross-site fetch with a text/plain body is CORS-safelisted and not preflighted, so a body of a=x\r\nSec-Fetch-Site: same-origin\r\n overwrote the real cross-site value and the gate returned Allow. The same trick overrode Host, defeating the anti-rebinding check too. The result was unauthenticated mouse, keyboard and CDP control of a browser running inside a container that has passwordless sudo — reachable from any page the user happened to visit, with the port range being a fixed 8-wide window that is trivially scanned. read_head now returns the terminator index and the caller authorizes against that slice only, while still replaying the full buffer into the tunnel so pipelined bodies are not lost. Duplicate Host, Origin and Sec-Fetch-Site headers are now refused outright rather than resolved last-wins, since that resolution is what turns any smuggling primitive into a full bypass and no legitimate client sends two. Three regression tests, including a guard assertion that the untruncated buffer really was accepted before, so the test cannot quietly stop testing the bypass. Found by adversarial review, verified by extracting the real authorize() and running the attack against it. 148 Rust tests, frontend build clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 18:53:58 -07:00
shadow-testandClaude Opus 5	d42b741337	Migrate a project onto a new base image without losing its volumes ... Projects were pinned to the image they were first created from. Both create paths preferred triple-c-snapshot-<id>:latest whenever it existed, and container_needs_recreation compared the container's live image against the triple-c.image label — which create_container wrote from the same image it created from. A tautology that could never fire. The only escape was Reset, which calls remove_project_volumes and destroys the login, skills and transcripts. Measured consequences on this host: real projects are missing socat (so the auth bridge cannot tunnel) and bubblewrap (so sandbox mode does not work), plus Mission Control and triple-c-sso-refresh, and sit 61 packages behind the base including ca-certificates, openssl and curl. Detection. create_container now writes triple-c.base-image-id (the image ID, not RepoDigests, which local-built and custom images do not have) and triple-c.create-image. container_needs_recreation takes the expected create-image and compares against the latter, so the check means something. base-image-id is deliberately NOT compared: a base bump would otherwise silently recreate from the snapshot, consuming the "you should migrate" signal without migrating. Staleness is surfaced, never acted on automatically. Migration keeps the volumes. /home/claude and ~/.claude are volumes and the image's copy is seed-only — permanently masked after first mount — so the login, ~/.claude.json, skills, transcripts, scheduler tasks, SSH keys, cargo, uv, ruff and Claude Code itself re-attach untouched. Only root-level state is rebuilt: apt packages are replayed against the new base rather than copied, so no stale libc is dragged forward, and /usr/local, /opt and the non-bind-mounted parts of /workspace are copied verbatim with tar --skip-old-files so they can never clobber a newer base binary. docker diff is not used: on a snapshot-derived container it reports only changes since the last commit. Raw image-vs-image diffing is filtered through dpkg ownership because it otherwise lies — 8,677 raw path differences on a real project reduced to 2 genuinely user-authored files, both loose /workspace-root files. Crash safety. snapshot:latest keeps pointing at the old image until the final commit, so any crash before it self-heals on next start. Later crashes are caught by reconcile_project_statuses. The rollback pin is a docker tag: 0.057s and 0 bytes. Rollback restores the system layer only — volumes are never touched — and the UI says so rather than implying a time machine. Fixes an infinite recreation loop shipped with the MCP removal. docker commit propagates labels to the image, so a container created from a snapshot inherited its non-empty triple-c.mcp-fingerprint and the one-shot shim recreated it again on every start, forever. Lineage labels are now always written explicitly. Documents the second, separate bug this uncovered: Dockerfile changes under /home/claude never reach an existing project, migration or not, because the volume masks them. Anything that must stay upgradable belongs in /usr/local/bin or /opt, or must be seeded by entrypoint.sh. 145 Rust tests, 227 frontend tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 18:19:12 -07:00
shadow-testandClaude Opus 5	cc5f691677	Add llama.cpp backend, model gateway, URL relay and browser view ... Four features, plus a latent bug fix. llama.cpp backend. Claude Code only ever speaks the Anthropic Messages API — confirmed empirically by pointing it at a logging server, which received POST /v1/messages?beta=true. llama-server implements that natively (verified in its README, alongside --port default 8080), so this is a plain base-URL backend with no translation shim, the same shape as Ollama. Its --api-key defaults to none, so the auth token is a placeholder Claude Code requires and llama-server ignores. Model alias fix. ANTHROPIC_DEFAULT_HAIKU_MODEL is documented as "also used for background functionality", and Triple-C set none of the alias vars. So on every custom-endpoint backend, Claude Code resolved `haiku` to an Anthropic model id and sent it to a local server that does not have it — background features failed silently. All four ANTHROPIC_DEFAULT_{OPUS,SONNET,HAIKU,FABLE}_MODEL vars are now pinned to the backend's configured model, with an optional Haiku override, and blanked for Anthropic and Bedrock so those keep Claude Code's defaults. The deprecated ANTHROPIC_SMALL_FAST_MODEL is never emitted. Existing Ollama and OpenAI-Compatible containers are recreated once so the new env reaches them; the snapshot is preserved. Model gateway. Optional LiteLLM sibling container, off by default, mirroring stt.rs — this is what makes real OpenAI usable, since api.openai.com has no /v1/messages. Pinned to v1.96.0 by tag and digest: the 1.82.7/1.82.8 malware was PyPI-only and never affected the official images, which is precisely why this builds FROM the image rather than pip-installing, but 1.84.0 is still the floor for proxy CVEs (API-key SQLi, Host-header auth bypass, MCP auth bypass). Binds 0.0.0.0 because project containers consume it, and therefore always sets a master_key — LiteLLM without one accepts any key. The provider key lives in the OS keychain and is uploaded into a volume, never an image layer or label. URL relay. A container-side xdg-open/BROWSER shim opens URLs in the host's browser. Uses an OSC sequence to /dev/tty rather than a printed sentinel, because the shim usually runs as a grandchild of a process capturing its children's output. Degrades to printing the URL when no terminal is attached, so scheduled tasks do not hang. Only http/https, with control characters rejected before new URL() — which strips newlines, so java\nscript: would otherwise parse as javascript:. Nothing auto-opens; the user confirms. The web terminal shows a tap-to-open banner instead, since that browser may be a phone across a tunnel. Browser view. A Project Home tab that watches and takes over the browser Claude drives with Playwright, using Playwright's own dashboard. Zero image cost — Playwright stays user-installed. It does not reuse the auth bridge's PortForward, which binds an unauthenticated port: correct for a throwaway OAuth listener, wrong for mouse and keyboard control of a browser in a passwordless-sudo container. Instead a token-gated loopback proxy checks Host, then token or a forbidden-header origin signal, before a byte reaches the container. Host ports are confined to 47820..=47827 so CSP frame-src can enumerate them rather than widening to a wildcard, with a test asserting the two agree. 188 frontend tests, 107 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 16:55:28 -07:00
shadow-testandClaude Opus 5	7d00390e1f	Add scheduled task creation, and stop a bad cron unscheduling everything ... Completes the Automation tab: it could list, toggle, run, log and remove tasks but not create them, so task creation still meant dropping to the CLI. Adds add_scheduled_task and update_scheduled_task, plus a task editor with cron presets and a plain-English reading of the expression. Every field is free user text, so all of it goes to the scheduler as a bare argv vector through bollard — no shell, no quoting. Validation is shape-only rather than metacharacter scrubbing: length caps, no control characters in single-line fields, no leading-dash name, absolute working_dir. Verified by round-tripping a prompt containing `; rm -rf /`, `$(id)`, backticks and newlines: it landed byte-for-byte in the task JSON with nothing executed. The scheduler CLI has no `edit`, so update is add-then-remove with the add first — a rejected edit leaves the original intact. The new id is surfaced in the editor rather than hidden. Root-cause fix, and the more serious half of this commit: triple-c-scheduler never validated --schedule, and rebuild_crontab regenerates the entire crontab and pipes it to `crontab`, which rejects the whole file if any line is malformed — with the error thrown away by `2>/dev/null || true`. A single bad schedule therefore silently unscheduled every other task in the container while reporting success. Reproduced directly. It matters because the global CLAUDE.md tells Claude to drive this CLI, so Claude could trigger it unprompted. `add` now validates the expression and exits non-zero, and rebuild_crontab reports a rejected crontab instead of swallowing it, keeping the offending file for inspection. Verified against the real CLI in this container: a bad schedule is refused without disturbing an existing task's crontab entry, and `0 9 * * 1-5`, `*/30 * * * *`, `0,30 8-17 * * *` and `0 0 1 1 *` are all still accepted. The Rust layer validates independently, agreeing with vixie cron on 23 probed expressions including `1/2` and `*/0` being invalid. 121 frontend tests, 44 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 12:20:52 -07:00
shadow-testandClaude Opus 5	d95ba54a69	Add shared-auth-token UI and make cancelling actually cancel ... UI for the shared Claude token: a Settings section showing token state with Authenticate and Revoke, an acquisition modal built on the shared Modal (sign-in link handed to the host browser via the opener plugin, plus the code input that answers `setup-token`'s stdin prompt — the flow cannot complete without it), and a per-project opt-out toggle shown only for the Anthropic backend. Cancellation: acquire_claude_token previously had only two exits, completion and a 15-minute timeout, and held the single-flight guard for the whole time. Closing the dialog therefore locked the user out of retrying for up to 15 minutes. Adds cancel_claude_token, backed by a oneshot claimed and released in lockstep with the input guard, selected on in the run loop so it wins the race and tears the exec down. The dialog's Cancel now calls it and closes either way. Also refreshes CLAUDE.md, which had drifted: it documented the deleted ProjectCard, and asserted that new IPC commands need permission grants in capabilities/default.json — they do not, that file covers plugin commands only. Adds the conventions that would otherwise bite: container_needs_recreation() is purely label-based and never diffs env, so container-affecting state needs its own label; and #[serde(default)] on a bool yields false regardless of intent. Corrects the claim that Reset preserves credentials. Reset calls remove_project_volumes, which deletes both the home and claude-config volumes, so it wipes ~/.claude, the OAuth token, installed skills and session transcripts. 84 frontend tests, 34 Rust tests, both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 11:49:03 -07:00
shadow-testandClaude Opus 5	01a2f6aec8	Add Project Home, Auth Bridge, shared auth token, and Tier-1 polish ... Project Home (DESIGN-REVIEW §B2): the project is promoted from a 280px sidebar card to a first-class main-area view. ProjectCard.tsx (1,257 lines) is replaced by a select-only ProjectRow plus tabs for Overview, Sessions, Automation, Config and Files. The PortMappings, FileManager and ContainerProgress modals are absorbed rather than reimplemented. Config gains a Saved/Saving/Failed indicator — save-on-blur failures previously reached only console.error. Tier-1 polish (DESIGN-REVIEW §A): new elevation, muted-accent, disabled and focus-ring tokens; a global :focus-visible ring with every focus:outline-none removed; filled buttons moved to --accent-emphasis and white-on-success toggles retired, fixing three WCAG AA failures (2.1:1, 2.5:1, 2.4:1); a shared Modal primitive with role="dialog", focus trap and restore, adopted by all remaining modals; status indicators that carry a glyph and word rather than colour alone. Ctrl+Shift+W closes a tab, deliberately not Ctrl+W — that is readline's kill-word, used constantly in the terminal this app is built around. Auth Bridge: a general loopback-callback bridge so browser logins run inside a container (aws sso login, Concourse fly login, claude login) can complete against the host browser. Listeners are discovered from /proc/net/tcp{,6} — ss/netstat/lsof are absent from the image — bound on host 127.0.0.1 only, and tunnelled in over the Docker API via socat, which keeps working on Docker Desktop where container IPs are not routable. Falls back to [::1] because Node resolves localhost to IPv6 first, so claude login often binds ::1 alone. Opt-in per project. This extracts create_attached_exec() and moves the existing terminal session path onto it, so there is one attached-exec implementation rather than two. Shared auth token: `claude setup-token` is run in a container, the token is stored in the OS keychain and injected as CLAUDE_CODE_OAUTH_TOKEN into Anthropic-backend projects. Contrary to the initial design note, setup-token uses an Anthropic-hosted redirect and blocks on a stdin paste prompt rather than a loopback callback, so a stdin command is required for the flow to complete. The token is never logged, never returned to the frontend, and is redacted from the streamed output with a stateful matcher that withholds any tail that could still grow into a secret. Change detection uses a random rotation id rather than a hash, since a hash in a docker-inspect readable label would be an offline verification oracle. Frontend 33 -> 51 tests; Rust 34 tests. Both builds clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 11:35:42 -07:00
shadow-testandClaude Opus 5	0ac4e5030c	Add permission modes and container introspection backend ... Permission modes: replaces the binary full_permissions flag with a PermissionMode enum (Plan/Default/AcceptEdits/Bypass). Flag mapping is defined once in PermissionMode::cli_args() and used by the terminal, the web terminal, and the scheduler: Plan -> --permission-mode plan Default -> (no flag) AcceptEdits -> --permission-mode acceptEdits Bypass -> --dangerously-skip-permissions Choices verified against `claude --permission-mode` on 2.1.226. full_permissions is retained and effective_permission_mode() falls back to it, so existing projects.json needs no migration. Bug fix: triple-c-task-runner ran `claude -p ... --dangerously-skip- permissions` unconditionally, ignoring the project's setting entirely. It now reads TRIPLE_C_PERMISSION_MODE, which is injected into the container, added to the reserved env blocklist, propagated through the entrypoint's cron env filter, and tracked by a new triple-c.permission-mode label so a change forces recreation. Introspection: new commands/inspect_commands.rs exposes read-only views into the container over docker exec — Claude sessions (parsed from ~/.claude/projects/<cwd>/<uuid>.jsonl), installed capabilities (skills, agents, commands, hooks, plugins, natively-configured MCP servers), and the triple-c-scheduler task list, logs and notifications. Task/session ids are validated against a strict allowlist and every parameterized call runs as a bare argv vector via bollard, so no shell is involved. Stopped containers return empty results rather than errors. No UI yet; that lands with the Project Home view. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 10:51:34 -07:00
shadow-testandClaude Opus 5	d0bb631d4d	Remove MCP backend, entrypoint injection, and docs; add migration shim ... Completes the removal begun in the previous commit. Backend: deletes models/mcp_server.rs, storage/mcp_store.rs and commands/mcp_commands.rs, the McpStore on AppState, the four IPC handlers, Project::enabled_mcp_servers, build_mcp_servers_json(), compute_mcp_fingerprint(), the MCP_SERVERS_JSON env injection, the mcp-fingerprint label, and the whole MCP container lifecycle. create_container() and container_needs_recreation() lose their mcp_servers/network_name parameters. Container: entrypoint.sh no longer merges MCP_SERVERS_JSON into ~/.claude.json. MCP_SERVERS_JSON stays in the reserved env blocklist. Security: the Docker socket is no longer auto-mounted for stdio+Docker MCP servers — it now mounts only when allow_docker_access is set. Migration: old containers were created with network_mode=triple-c-net-<projectId> and refuse to start once that network is gone. docker/network.rs becomes docker/legacy_cleanup.rs with label-driven, best-effort removal of leftover MCP containers and the per-project network, called on both delete and recreate. container_needs_recreation() now forces a rebuild for any container carrying a non-empty triple-c.mcp-fingerprint label or attached to a triple-c-net-* network, moving it onto the default bridge. Both can be dropped a release later. Docs: drops the MCP sections from README/HOW-TO-USE/TECHNICAL and adds a short note pointing at Claude Code's native `claude mcp` / `/mcp` / .mcp.json instead. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-09 10:31:18 -07:00
shadow-testandClaude Opus 4.8	26adccce5b	Rename backup archive root so extraction dir mode isn't clobbered ... The transform used `s,^\./,workspace/,`, which rewrites the workspace *contents* (`./foo` -> `workspace/foo`) but leaves tar's root member as a bare `./`. That `./` entry carries the source root's mode/mtime, and on extraction tar stamps them onto the extraction directory itself. Match the leading `.` instead (`s,^\.,workspace,`) so the root member is renamed `./` -> `workspace`, giving the archive a proper `workspace/` directory entry and no bare `./`. The extraction directory is left untouched. Contents, hidden files, excludes, symlink targets and the `flags=rh` hardlink handling are unchanged. Verified in-container: archive top level is exactly `workspace/` + `home-claude/`, no `./` member, node_modules excluded, extraction into a 0755 dir leaves it 0755, workspace/.git preserved. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:33:02 -07:00
shadow-testandClaude Opus 4.8	5cd528a4ef	Use flags=rh so intra-workspace hardlinks survive the transform ... Review caught that `flags=r` disables rewriting of both symlink AND hardlink target names. Leaving symlink targets alone is intended, but a hardlink's stored target is an archive-internal reference to another member's name — when member names become `workspace/...` but the hardlink target stays `./hard_link`, extraction fails hard: tar: workspace/file.txt: Cannot hard link to './hard_link': No such file or directory `flags=rh` rewrites regular member names and hardlink target names together (keeping the pair consistent) while still leaving symlink targets untouched. Verified in-container: extract exit 0, symlink target preserved, hardlink pair shares one inode, nesting under workspace/ intact. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:22:14 -07:00
shadow-testandClaude Opus 4.8	c3fc029b1d	Nest workspace under workspace/ in project backup ... The backup archive placed the workspace at the archive root (`./...`) while the sanitized home config sat under `home-claude/`. On extraction the workspace files scattered loose into the extraction directory and only `home-claude/` showed up as a distinct folder, so the backup read as "config only, workspace missing" — and some archive viewers didn't surface the root-level entries at all. Add `--transform='flags=r;s,^\./,workspace/,'` so the workspace nests under `workspace/`, parallel to `home-claude/`. `flags=r` scopes the rewrite to member names only, leaving symlink targets (relative and absolute) intact. Excludes still match the pre-transform names. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-01 06:18:08 -07:00
shadow-testandClaude Opus 4.8	3e2e3f231b	Third review pass: fix tar TOCTOU + transient backup status ... - F2: upload_host_file_to_container now reads the dropped file into a Vec inside the blocking task and sizes the tar entry from those exact bytes, rather than stat-then-stream where a file changing size between the stat and the read could desync the tar header and silently corrupt the archive. Still runs off the async worker; memory stays bounded by the 256 MiB drop cap. - F4: the "Backup saved" confirmation now auto-clears after 8s (guarded against clobbering a newer status message) instead of lingering in the project card's status line indefinitely. F1 (claimed AWS CLI regression from empty-env neutralization) was a false positive: verified against aws-cli 2.35 that an empty AWS_ACCESS_KEY_ID is treated as absent and botocore falls through to ~/.aws/credentials (the call reached AWS and returned InvalidClientTokenId for the file's key, not PartialCredentialsError). No change needed. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 15:16:42 -07:00
shadow-testandClaude Opus 4.8	01a8f5c503	Apply remaining review findings (L-e, L-f) ... - L-e: route terminal file drops purely by a bounds hit-test instead of the `active` flag. Inactive panes are display:none (zero-size rect) so they never match; a zero-size guard makes that explicit. Correct for the current tabbed layout and future-proof for split panes, where a drop on a visible-but-unfocused pane previously matched no handler. - L-f: stream the dropped file straight into the upload tar inside a blocking task (new exec::upload_host_file_to_container) instead of reading the whole file into a Vec and then re-packing it. Peak memory drops from ~2x to ~1x the file size, and the synchronous file IO no longer runs on the async worker. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 15:05:25 -07:00
shadow-testandClaude Opus 4.8	0945e21eb1	Address second review pass: fix start-time race + minor cleanups ... - M1 (race): don't mount the host AWS dir for static-credential Bedrock. sync_bedrock_credentials() is the sole writer of ~/.aws/credentials in that mode, and mounting /tmp/.host-aws let the entrypoint's `rm -rf ~/.aws; cp -a` race that write at startup (only when a global aws_config_path was also set). Static keys + AWS_REGION env are self-sufficient and don't need the host config, so skipping the mount removes the dual-writer entirely. - L-a: exit codes are now read via wait_for_exec_exit(), which polls inspect_exec until the exec reports finished, so a non-zero tar/cred exit isn't missed by reading exit_code too early. The backup only fails on a definitively non-zero code (falls back to the empty-output check if undeterminable). - L-b: fixed two comments that referenced the old write_bedrock_static_credentials name (now sync_bedrock_credentials). - L-c: entrypoint only rewrites ~/.claude.json when awsAuthRefresh is actually present, avoiding a needless jq reformat on every non-SSO start. - L-d: backup script traps EXIT to remove its mktemp staging dir even when tar fails, so failed backups don't accumulate temp dirs (with the sanitized config copy) in the container. L-e (drop routing) is a non-issue: the layout is tabbed, so only one terminal pane is ever visible; the active-guard routing is correct. Verified the race fix, trap cleanup, grep guard, and exit-code polling. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:59:48 -07:00
shadow-testandClaude Opus 4.8	d65872dc94	Address remaining review items: L4/M1 + L2/L5 cleanup ... - L4: sync_bedrock_credentials (renamed from write_bedrock_static_ credentials) now also clears a stale ~/.aws/credentials when the project no longer uses static-credential Bedrock, so static keys don't linger unused in the persistent home volume after switching backends. Skipped when /tmp/.host-aws is mounted (host-managed ~/.aws). HOME is also set explicitly on the exec env for robustness. - M1: the Backup button now has a tooltip and the success toast notes that the archive includes MCP/config which may contain MCP-embedded API keys (OAuth tokens are excluded) — keep it private. - L2: backup now uses async file IO (tokio::fs::File + AsyncWriteExt, tokio::fs::remove_file) instead of blocking std::fs between awaits; dropped-file reads use tokio::fs::metadata/read. - L5: upload_host_file_to_terminal explicitly `mkdir -p`s /tmp/triple-c-drops instead of relying on Docker's tar extractor to create the parent dir. Verified L4 cleanup guard, L5 mkdir, async IO, and exit-code paths against real containers. cargo check / tsc / vitest all pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:37:33 -07:00
shadow-testandClaude Opus 4.8	edf0698774	Address PR review: backup correctness/security + drop hardening ... Fixes from the code review of this branch: - Backup requires a running container (it runs via `docker exec`, which can't run on a stopped one). Removed the misleading "Backup" button from the stopped-project actions, added an explicit running check with a clear error, and corrected the doc comment. (H1) - jq sanitization fallback no longer leaks secrets: if ~/.claude.json can't be parsed, the backup substitutes an empty object and warns to stderr instead of copying the raw file (which held primaryApiKey / oauthAccount). Verified the raw key never reaches the archive. (H2) - Dropped-file paths typed into the terminal are now always single-quoted (with '\'' escaping), not only when they contain whitespace — a name like `foo$(whoami).txt` was previously sent raw into the shell. (M2) - write_bedrock_static_credentials checks the exec exit code via the new exec_oneshot_env_status and fails loudly on a write/chmod error instead of silently reporting success. exec_oneshot keeps its ignore-exit-code behavior so list_container_files is unaffected. (M4) - Backup removes a partial/truncated archive on any stream error and treats a non-zero tar exit code as failure (a truncated gzip was previously reported as success). (L1) - Dropped files are capped at 256 MiB to avoid ballooning host RAM (the file is read fully into memory then re-tarred). (M3) - Stopped excluding .git/objects from the backup so git history, including unpushed commits, is preserved faithfully. (L3) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:28:00 -07:00
shadow-testandClaude Opus 4.8	84e0bdf7b4	Add file drag-and-drop onto the terminal ... Drop files onto a terminal pane and they're copied into the container and their in-container paths typed into the prompt, so Claude Code can read them for reference — mirroring the existing image-paste flow. Backend: upload_host_file_to_terminal reads the dropped host file and writes it under /tmp/triple-c-drops/<name> in the session's container, returning that path. Rejects directories and unreadable paths. Frontend: TerminalView subscribes to Tauri's webview onDragDropEvent (OS file drops are intercepted at the webview level, so HTML5 ondrop wouldn't expose paths). The window-wide event is guarded by the pane's `active` flag plus a bounds hit-test so a drop only affects the terminal it landed on; multiple files are uploaded and their paths inserted space-separated (quoted when they contain spaces). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:11:09 -07:00
shadow-testandClaude Opus 4.8	10e689eaa6	Include sanitized home config in project backup ... Extends download_container_backup to also capture the container's home config so MCP servers, settings, and skills set up directly via Claude Code (stored in ~/.claude.json / ~/.claude, on the home/config volumes that a Reset wipes) survive a backup/restore cycle. Secrets are stripped per the "exclude secrets" choice: ~/.claude.json is filtered through jq to drop primaryApiKey/oauthAccount/customApiKeyResponses (mcpServers and settings are kept), and ~/.claude/.credentials.json (the OAuth tokens) is omitted. Staged config is archived under home-claude/ in the tarball. Verified on the Ubuntu/jq container base. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 14:04:19 -07:00
shadow-testandClaude Opus 4.8	d07dcdfea9	Add "Backup" action to download a project's /workspace as .tar.gz ... Adds a manual backup button on each project card (next to Start/Reset when stopped, and next to Files when running) that saves a gzipped tarball of the container's /workspace to a host path via the native save dialog. Backend: download_container_backup runs `tar czf -` inside the container (so excludes + compression happen there rather than streaming a 16 GB workspace) and pipes stdout straight to the chosen file. Regenerable build artifacts (node_modules, target, .git/objects) are excluded so the archive stays restore-sized. Returns bytes written; stderr is captured for error reporting and a zero-byte result is treated as failure. Works whether the container is running or stopped (only requires that it exists). Verified on the Ubuntu/GNU-tar container base. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 13:48:04 -07:00
shadow-testandClaude Opus 4.8	424ab04ca8	Fix stale AWS/Bedrock auth carrying over on backend switch ... When a project switched backends (e.g. Bedrock -> Anthropic), the recreated container kept authenticating against Bedrock, and SSO kept firing after switching away. Three root causes, all fixed: 1. Recreation builds the new container from a `docker commit` snapshot. commit always bakes the previous container's full ENV into the image (an empty commit Config does NOT strip it, and the commit API cannot remove env). So CLAUDE_CODE_USE_BEDROCK=1 / AWS_* survived into the new container. Fix: create_container now explicitly clears every managed auth key the active backend does not set (MANAGED_AUTH_KEYS), so create-time env overrides the stale baked-in values. 2. awsAuthRefresh was written into ~/.claude.json (persisted home volume) and never removed, so Claude Code kept invoking triple-c-sso-refresh after switching to a non-SSO backend. Fix: entrypoint now deletes awsAuthRefresh when AWS_SSO_AUTH_REFRESH_CMD is unset, idempotent both ways. 3. Static/session AWS creds were baked into Config.Env at create time, so a stop/start kept stale creds and rotated keys never refreshed without a full recreation. Fix: static creds are no longer injected as env vars; write_bedrock_static_credentials() writes ~/.aws/credentials (0600, secrets via exec env not argv) on every start, and removes a stale ~/.aws/config left from a prior profile/SSO session. Static creds also dropped from the bedrock fingerprint so a key rotation refreshes in place instead of forcing recreation. Adds exec_oneshot_env() for env-carrying one-shot execs. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-30 13:34:43 -07:00
shadow-testandClaude Opus 4.7	2fa6abeae0	Allow renaming terminal tabs (persisted per project) ... Right-click a tab (or double-click) to rename. Renamed labels show as "ProjectName: CustomName" and are stored in the project's renamed_session_names map. The entry is cleared on tab close. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-24 08:50:48 -07:00
shadow-testandClaude Opus 4.7	5b1c801cf1	Add global backend defaults with runtime fallback ... New fields: GlobalAwsSettings.default_model_id, plus GlobalOllamaSettings and GlobalOpenAiCompatibleSettings (base_url + default_model_id each). When a per-project base_url or model_id is blank, the container env vars and config fingerprints fall back to the global value. Container recreation is triggered whenever the resolved value changes, so editing a global default updates existing projects on next start. UI: added the new fields to AwsSettings and two new global settings components, slotted into the Backends accordion. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-24 08:49:06 -07:00
shadow-testandClaude Opus 4.7	272eb28863	Bump tauri Rust crate to 2.11.0 to match @tauri-apps/api ... CI's pre-build version check failed: tauri (2.10.2) vs @tauri-apps/api (2.11.0). Both the Cargo.toml and package.json caret-pin to 2, so this is purely a lockfile resolution fix — `cargo update -p tauri --precise 2.11.0` brings the Rust side up to match. Schema regeneration is included since the gen/schemas/ output is keyed to the Tauri version. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-01 13:32:02 -07:00
shadow-testandClaude Opus 4.7	5974347913	Add per-project sandbox mode and Bedrock service-tier ... Sandbox mode: new per-project toggle that turns on Claude Code's bash sandbox inside the container. Adds `bubblewrap` and `socat` to the Dockerfile (the two Linux deps required by the sandbox), and emits a managed `sandbox` block into `~/.claude/settings.json` via the existing CLAUDE_CODE_SETTINGS_JSON entrypoint merge: - `enabled` mirrors the Triple-C toggle and is always emitted, so the entrypoint's recursive jq merge clears any prior on-state from the persisted named volume — Triple-C is authoritative. - `enableWeakerNestedSandbox: true` because we run inside Docker without privileged user namespaces. - `allowUnsandboxedCommands: false` to disable the `dangerouslyDisableSandbox` escape hatch — opting into the sandbox shouldn't come with a runtime bypass. When sandbox is on, a SANDBOX_INSTRUCTIONS section is appended to CLAUDE_INSTRUCTIONS so Claude can guide users through allowing extra paths/domains, excluding `docker *`/`watchman *` from the sandbox, and the rule that `sandbox.enabled` is owned by Triple-C. The Claude-Code settings fingerprint includes sandbox state (only when on, to avoid spuriously flagging existing containers for recreation on upgrade). Bedrock service tier: new optional field on the per-project Bedrock config. When set, exported as ANTHROPIC_BEDROCK_SERVICE_TIER (added in Claude Code 2.1.122) and included in the Bedrock fingerprint. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-01 12:58:54 -07:00
shadow-testandClaude Opus 4.7	805f815876	Regenerate Tauri ACL schemas after dialog plugin update ... Picks up the deprecation notes on dialog `ask`/`confirm` permissions (now aliased to `allow-message`/`deny-message` and slated for removal in Tauri v3). No behavior change — generated artifacts only. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-05-01 11:57:22 -07:00
shadow-testandClaude Opus 4.7	ee68cc820c	Add Docker install helper for first-run setup ... When Docker isn't detected on startup, surface a dialog offering a one-click install (pkexec + get.docker.com on Linux, brew cask on macOS, winget on Windows) with a graceful fallback to manual steps and a link to official documentation. Install output streams back to the UI via a tauri event. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-04-24 10:18:46 -07:00
shadow-testandClaude Opus 4.7	3c7852544b	Fix TUI fullscreen mode cutting off Claude Code status line ... Add bottom padding to terminal containers so FitAddon proposes one fewer row, leaving visible space below Claude Code's mode indicator. Previously the bottom status line (e.g. "bypass permissions on") was clipped against the container edge in fullscreen TUI mode. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>	2026-04-16 15:44:10 -07:00
shadow-testandClaude Opus 4.6	d60124f1bd	Fix CI: harden version computation and Dockerfile apt retries ... Two fixes for the v0.3.x initial build failures: 1. **Compute Version step**: When no tags match v0.3.*, `grep` returns exit 1 which under `pipefail` killed the step before the empty-tag fallback could run. Added `|| true` to the pipeline so the fallback (`git rev-list --count HEAD`) runs correctly on first 0.3.x build. 2. **Dockerfile apt-get update**: Transient archive.ubuntu.com mirror sync failures (stale Packages.gz with mismatched hash) broke the GitHub CLI install step. Added a shell retry loop (5 attempts with 10s sleep, clearing /var/lib/apt/lists/* between retries) to both the main system packages step and the GitHub CLI step, plus Acquire::Retries=3 on the other apt-get update calls for transient network failures. Also includes the Cargo.lock 0.2.0 → 0.3.0 rev that went with the previous version bump commit. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-16 09:09:30 -07:00
shadow-testandClaude Opus 4.6	4f23951379	Bump version to 0.3.0 ... ## What's New in v0.3.0 ### Claude Code Settings (TUI Mode, Effort, Focus, Caching) - New per-project and global settings for Claude Code CLI behavior - **TUI Fullscreen Mode**: Flicker-free alt-screen rendering via CLAUDE_CODE_NO_FLICKER - **Effort Level**: Control reasoning depth (low/medium/high) - **Focus Mode**: Collapse tool output to one-line summaries - **Thinking Summaries**: Show Claude's thinking process - **Session Recap**: Get context when returning to a session - **Auto-Scroll Disabled**: Disable auto-scroll in fullscreen TUI - **Env Scrub**: Strip credentials from subprocess environments - **Prompt Caching (1h)**: Enable 1-hour prompt cache TTL - New ClaudeCodeSettingsModal accessible from project config and global settings - Settings injected as env vars and ~/.claude/settings.json via entrypoint ### Session Naming - Name Claude Code terminal sessions with the -n flag - Session names displayed in terminal tabs instead of project name ### Global Default Fallbacks - Global SSH key path now used when per-project SSH path is not set - Global git name/email now used when per-project values are not set - New UI in Settings panel for SSH key directory, git name, and git email ### Relaxed Environment Variable Filter - CLAUDE_CODE_* env vars now allowed in custom env vars for power users - Only specific internal vars (CLAUDE_INSTRUCTIONS, MCP_SERVERS_JSON, etc.) blocked ### Documentation - Updated README, HOW-TO-USE, and CLAUDE.md with all new features - New "Claude Code Tips" section documenting built-in CLI features (/focus, /recap, /color, /loop, /powerup, /team-onboarding, setup wizards) Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-16 08:48:19 -07:00
shadow-testandClaude Opus 4.6	d6ac3ae6c6	Add Claude Code settings infrastructure, TUI mode, session naming, and global defaults ... Adds first-class support for Claude Code CLI features (2.1.71-2.1.110): - New ClaudeCodeSettings struct with per-project and global defaults for TUI mode, effort level, focus mode, thinking summaries, session recap, auto-scroll, env scrub, and 1-hour prompt caching - Settings injected as env vars (CLAUDE_CODE_NO_FLICKER, etc.) and ~/.claude/settings.json entries via entrypoint.sh merge block - New ClaudeCodeSettingsModal component for configuring settings - Session naming support (-n flag passed to claude CLI, shown in tabs) - Relaxed reserved prefix filter: CLAUDE_CODE_* env vars now allowed in custom env vars UI for power users - Global SSH key path, git name, and git email now used as fallbacks when per-project values are not set, with UI in SettingsPanel - Fingerprint-based change detection triggers container recreation when Claude Code settings change - Updated README, HOW-TO-USE, and CLAUDE.md documentation Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-16 08:46:03 -07:00
shadow-testandClaude Opus 4.6	ef67b447b3	Pre-validate AWS SSO session on host during container startup ... For Bedrock Profile projects, SSO credentials are now checked and refreshed on the host before the container starts, so the entrypoint copies already-valid tokens. This eliminates the delay where users had to wait for the terminal to open before being prompted to login. The terminal-time fallback remains for mid-session credential expiry. Also consolidates duplicated profile resolution logic into a shared helper in aws_commands. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-15 06:54:59 -07:00
shadow-testandClaude Opus 4.6	a0b4dca0bd	Auto-start STT container on app launch when enabled in settings ... Previously the STT container only started on-demand (mic button click or manual start in settings). Now it auto-starts during app setup if stt.enabled is true, matching the web terminal auto-start pattern. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-13 06:34:36 -07:00
shadow-testandClaude Opus 4.6	765ba91d7b	Fix tauri-plugin-dialog version mismatch (2.6.0 → 2.7.0) ... Cargo had resolved to 2.6.0 while npm had 2.7.0, causing the Tauri build version check to fail. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-12 20:20:09 -07:00
shadow-testandClaude Opus 4.6	532de77927	Add speech-to-text feature using Faster Whisper container ... Adds a mic button to the terminal UI that captures speech, transcribes it via a Faster Whisper sidecar container, and injects the text into the terminal input. Includes settings panel for model selection (tiny/small/medium), port config, and container lifecycle management. - stt-container/: Dockerfile + FastAPI server for Whisper transcription - Rust backend: STT container management, transcribe_audio IPC command - Frontend: useSTT hook, SttButton, SttSettings, WAV encoder - CI: Gitea Actions workflow for multi-arch STT image builds Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-12 20:02:39 -07:00
shadow-testandClaude Opus 4.6	2dffef0767	Bundle mission-control into Triple-C instead of cloning from GitHub ... The mission-control (Flight Control) project is being closed upstream. This embeds the project files directly in the repo under container/mission-control/, bakes them into the Docker image at /opt/mission-control, and copies them into place at container startup instead of git cloning from GitHub. Also adds missing osc52-clipboard, audio-shim, and triple-c-sso-refresh to the programmatic Docker build context in image.rs. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-04-03 09:09:15 -07:00
shadow-testandClaude Opus 4.6	57a7cee544	Make topbar and tab bar sticky in web terminal ... Adds position:sticky to the topbar and tab bar so they stay pinned at the top when the virtual keyboard opens on tablets. Also uses 100dvh (dynamic viewport height) so the layout properly shrinks when the keyboard appears on mobile browsers. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-03-18 09:15:31 -07:00
shadow-testandClaude Opus 4.6	9ee0d34c19	Fix tablet keyboard input lag and add scroll-to-bottom button ... Adds a dedicated input bar at the bottom that bypasses mobile IME composition buffering — characters are sent immediately on each input event instead of waiting for word boundaries. Also adds helper buttons (Enter, Tab, Ctrl+C) and a floating scroll-to-bottom button that appears when scrolled up from the terminal output. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-03-17 20:03:13 -07:00
shadow-testandClaude Opus 4.6	922543cc04	Add web terminal for remote tablet/phone access to project terminals ... Adds an axum HTTP+WebSocket server that runs alongside the Tauri app, serving a standalone xterm.js-based terminal UI accessible from any browser on the local network. Shares the existing ExecSessionManager via Arc-wrapped stores, with token-based authentication and automatic session cleanup on disconnect. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-03-17 19:31:16 -07:00
shadow-testandClaude Opus 4.6	13038989b8	Fix spurious container snapshot on every start for projects with env vars ... Migrate env-var-based checks in container_needs_recreation() to label-based checks. When a container snapshot is committed, Docker merges the image's env vars with the container's, causing get_env() to return stale values and triggering an infinite snapshot→recreate loop. Labels are immutable after creation and immune to this merging behavior. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>	2026-03-16 13:17:00 -07:00
shadow-testandClaude Opus 4.6	b17c759bd6	Fix remaining repo.anhonesthost.net references in user-facing code ... - help_commands.rs: fetch HOW-TO-USE.md from GitHub raw instead of Gitea - DockerSettings.tsx: display GHCR image address in settings UI - HOW-TO-USE.md: update registry description to ghcr.io Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 11:31:46 -07:00
shadow-testandClaude Opus 4.6	bab1df1c57	Switch distribution from Gitea to GitHub/GHCR ... Work VPN blocks repo.anhonesthost.net, breaking update checks and image pulls. Move all user-facing distribution to GitHub (releases API) and GHCR (container images) while keeping Gitea as the source of truth for development and CI. - CI: push container images to GHCR alongside Gitea registry - App updates: switch releases API to api.github.com, filter by asset filename instead of tag suffix for unified releases - Image updates: switch registry to ghcr.io with anonymous token auth - Container pull: point REGISTRY_IMAGE to ghcr.io/shadowdao/triple-c-sandbox - Rename GiteaRelease/GiteaAsset structs to GitHubRelease/GitHubAsset Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 10:55:41 -07:00
shadow-testandClaude Opus 4.6	b952b8e8de	Add per-project full permissions toggle for --dangerously-skip-permissions ... New projects default to standard permission mode (Claude asks before acting). Existing projects default to full permissions ON, preserving current behavior. UI toggle uses red/caution styling to highlight the security implications. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 08:58:13 -07:00
shadow-testandClaude Opus 4.6	d7d7a83aec	Rename LiteLLM backend to OpenAI Compatible ... Reflects that this backend works with any OpenAI API-compatible endpoint (LiteLLM, OpenRouter, vLLM, text-generation-inference, LocalAI, etc.), not just LiteLLM. Includes serde aliases for backward compatibility with existing projects.json files. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-13 06:16:05 -07:00
shadow-testandClaude Opus 4.6	27007b90e3	Fetch help content from repo, add TOC and marketplace troubleshooting ... Help dialog now fetches HOW-TO-USE.md live from the gitea repo on open, falling back to the compile-time embedded copy when offline. Content is cached for the session. Removes the ~600-line hardcoded markdown constant from HelpDialog.tsx in favor of a single source of truth. Adds a Table of Contents with anchor links for quick navigation and a new troubleshooting entry for the "Failed to install Anthropic marketplace" error with the jq fix. Markdown renderer updated to support anchor links and header id attributes. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 11:00:59 -07:00
shadow-testandClaude Opus 4.6	d2c1c2108a	Fix update checker to use full semver comparison and correct platform filtering ... The version comparison was only comparing the patch number, ignoring major and minor versions. This meant 0.1.75 (patch=75) appeared "newer" than 0.2.1 (patch=1), and updates within 0.2.x were missed entirely. Also fixed platform filtering to handle -mac suffix (previously only filtered -win, so Linux users would see macOS releases too). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 09:45:43 -07:00
shadow-testandClaude Opus 4.6	38082059a5	Rename AuthMode to Backend, fix LiteLLM variant typo, add image update alerts, clean up Settings ... - Fix serde deserialization error: TypeScript sent "lit_llm" but Rust expected "lite_llm" - Rename AuthMode enum to Backend across Rust and TypeScript (with serde alias for backward compat) - Add container image update checking via registry digest comparison - Improve Settings page: fix image address display spacing, remove per-project auth section - Update UI labels from "Auth" to "Backend" throughout Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-12 09:26:58 -07:00
shadow-testandClaude Opus 4.6	b6fd8a557e	Clean up compiler warnings and document Ollama/LiteLLM backends ... Remove unused `any_docker_mcp()` function, add `#[allow(unused_imports)]` and `#[allow(dead_code)]` annotations to suppress false-positive warnings. Update README.md and HOW-TO-USE.md with Ollama and LiteLLM auth backend documentation including best-effort compatibility notices. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>	2026-03-11 13:23:50 -07:00