Merge pull request 'Fix scheduled tasks failing to authenticate, and show when one is running' (#24) from fix/scheduler-home-clobber into main

Reviewed-on: #24

HOW-TO-USE.md

@@ -1139,13 +1139,23 @@ triple-c-scheduler list                    # List all tasks
 triple-c-scheduler enable --id abc123      # Enable a task
 triple-c-scheduler disable --id abc123     # Disable a task
 triple-c-scheduler remove --id abc123      # Delete a task
-triple-c-scheduler run --id abc123         # Trigger a task immediately
+triple-c-scheduler run --id abc123         # Trigger a task now, streaming its log
+triple-c-scheduler status                  # What is running right now, and for how long
+triple-c-scheduler status --id abc123 -w   # Watch one task until its run finishes
 triple-c-scheduler logs --id abc123        # View logs for a task
 triple-c-scheduler logs --tail 20          # View last 20 log entries (all tasks)
 triple-c-scheduler notifications           # View completion notifications
 triple-c-scheduler notifications --clear   # Clear notifications
 ```
 
+`list` carries a status column, and the Automation tab marks a task **Running** with
+its elapsed time, so a triggered run is visible rather than silent.
+
+Note that a log which has stopped growing is not evidence of a stall: `claude -p`
+writes its answer in one go when it finishes, so a healthy run shows nothing but its
+header for as long as it is thinking. `status` is what distinguishes a slow run from
+a dead one — it reports the run only while the runner's process is genuinely alive.
+
 ### Cron Schedule Format
 
 Standard 5-field cron: `minute hour day-of-month month day-of-week`

app/src-tauri/src/commands/inspect_commands.rs

@@ -164,6 +164,11 @@ pub struct ScheduledTask {
     /// Only known for enabled one-shot tasks (their `at` time). Recurring cron
     /// expressions are not evaluated here.
     pub next_run: Option<String>,
+    /// Whether a run is in flight right now, from the runner's state file in
+    /// `~/.claude/scheduler/running/<id>.json` with its pid verified live.
+    pub running: bool,
+    /// When the in-flight run started, ISO 8601 (UTC). `None` unless `running`.
+    pub running_since: Option<String>,
 }
 
 /// A completion notice written by `triple-c-task-runner` after a task ran.
@@ -614,13 +619,25 @@ const SCHEDULER_LIST_SCRIPT: &str = r#"exec 2>/dev/null
 set -u
 TASKS="$HOME/.claude/scheduler/tasks"
 LOGS="$HOME/.claude/scheduler/logs"
+RUNNING="$HOME/.claude/scheduler/running"
 [ -d "$TASKS" ] || { echo '[]'; exit 0; }
 for f in "$TASKS"/*.json; do
   [ -f "$f" ] || continue
   id=$(jq -r '.id // ""' "$f") || continue
   [ -n "$id" ] || id=$(basename "$f" .json)
   last=$(find "$LOGS/$id" -name '*.log' -type f -printf '%T@\n' | sort -rn | head -1)
-  jq -c --arg fallback_id "$id" --arg lr "${last%%.*}" '{
+  # Live-run state. The pid is checked, not trusted: a container stopped
+  # mid-run cannot fire the runner's cleanup trap, and a task stuck on
+  # "running" forever is a worse lie than showing nothing.
+  started=""
+  state="$RUNNING/$id.json"
+  if [ -f "$state" ]; then
+    pid=$(jq -r '.pid // empty' "$state")
+    if [ -n "$pid" ] && kill -0 "$pid" 2>/dev/null; then
+      started=$(jq -r '.started_epoch // empty' "$state")
+    fi
+  fi
+  jq -c --arg fallback_id "$id" --arg lr "${last%%.*}" --arg started "$started" '{
       id: (if (.id // "") == "" then $fallback_id else .id end),
       name: (.name // ""),
       prompt: (.prompt // ""),
@@ -630,7 +647,8 @@ for f in "$TASKS"/*.json; do
       enabled: (.enabled == true),
       working_dir: (.working_dir // "/workspace"),
       created_at: (.created_at // null),
-      last_run_epoch: (if $lr == "" then null else ($lr | tonumber) end)
+      last_run_epoch: (if $lr == "" then null else ($lr | tonumber) end),
+      running_since_epoch: (if $started == "" then null else ($started | tonumber) end)
     }' "$f"
 done | jq -s 'sort_by(.name, .id)'
 "#;
@@ -673,6 +691,7 @@ struct RawScheduledTask {
     working_dir: String,
     created_at: Option<String>,
     last_run_epoch: Option<i64>,
+    running_since_epoch: Option<i64>,
 }
 
 #[derive(Debug, Deserialize)]
@@ -723,6 +742,8 @@ pub async fn list_scheduled_tasks(
                 created_at: t.created_at,
                 last_run: t.last_run_epoch.map(epoch_to_iso),
                 next_run,
+                running: t.running_since_epoch.is_some(),
+                running_since: t.running_since_epoch.map(epoch_to_iso),
             }
         })
         .collect())

app/src-tauri/src/docker/container.rs

@@ -18,11 +18,12 @@ This container supports scheduled tasks via `triple-c-scheduler`. You can set up
 ### Commands
 - `triple-c-scheduler add --name "NAME" --schedule "CRON" --prompt "TASK"` — Add a recurring task
 - `triple-c-scheduler add --name "NAME" --at "YYYY-MM-DD HH:MM" --prompt "TASK"` — Add a one-time task
-- `triple-c-scheduler list` — List all scheduled tasks
+- `triple-c-scheduler list` — List all scheduled tasks, with a running/idle status column
 - `triple-c-scheduler remove --id ID` — Remove a task
 - `triple-c-scheduler enable --id ID` / `triple-c-scheduler disable --id ID` — Toggle tasks
+- `triple-c-scheduler status [--id ID] [--watch]` — Show what is running right now, and for how long
 - `triple-c-scheduler logs [--id ID] [--tail N]` — View execution logs
-- `triple-c-scheduler run --id ID` — Manually trigger a task immediately
+- `triple-c-scheduler run --id ID` — Manually trigger a task immediately (streams its log)
 - `triple-c-scheduler notifications [--clear]` — View or clear completion notifications
 
 ### Cron format
@@ -36,7 +37,7 @@ Use `--at "YYYY-MM-DD HH:MM"` instead of `--schedule`. The task automatically re
 Use `--working-dir /workspace/project` to set where the task runs (default: /workspace).
 
 ### Checking results
-After tasks run, check notifications with `triple-c-scheduler notifications` and detailed output with `triple-c-scheduler logs`.
+While a task is running, `triple-c-scheduler status` reports it with elapsed time — a log that has stopped growing is normal, because `claude -p` writes its answer only at the end, so use `status` rather than log silence to tell a slow run from a dead one. After tasks run, check notifications with `triple-c-scheduler notifications` and detailed output with `triple-c-scheduler logs`.
 
 ### Timezone
 Scheduled times use the container's configured timezone (check with `date`). If no timezone is configured, UTC is used."#;

app/src/components/projects/home/AutomationTab.test.tsx

@@ -0,0 +1,112 @@
+import { describe, it, expect, vi, beforeEach, afterEach } from "vitest";
+import { render, screen, fireEvent, act } from "@testing-library/react";
+import AutomationTab from "./AutomationTab";
+import type { Project, ScheduledTask } from "../../../lib/types";
+
+const listScheduledTasks = vi.fn(async () => tasks);
+const getSchedulerNotifications = vi.fn(async () => []);
+const runScheduledTaskNow = vi.fn(async () => "started");
+const pushToast = vi.fn();
+
+vi.mock("../../../lib/tauri-commands", () => ({
+  listScheduledTasks: () => listScheduledTasks(),
+  getSchedulerNotifications: () => getSchedulerNotifications(),
+  runScheduledTaskNow: (p: string, t: string) => runScheduledTaskNow(p, t),
+  clearSchedulerNotifications: vi.fn(async () => {}),
+  getScheduledTaskLog: vi.fn(async () => ""),
+  removeScheduledTask: vi.fn(async () => {}),
+  setScheduledTaskEnabled: vi.fn(async () => {}),
+}));
+
+vi.mock("../../../store/appState", () => ({
+  useAppState: (selector: (s: unknown) => unknown) => selector({ pushToast }),
+}));
+
+const project = { id: "p1", name: "api", status: "running" } as unknown as Project;
+
+const baseTask: ScheduledTask = {
+  id: "a1b2c3d4",
+  name: "nightly",
+  prompt: "Run the suite",
+  schedule: "0 3 * * *",
+  task_type: "recurring",
+  at: null,
+  enabled: true,
+  working_dir: "/workspace",
+  created_at: null,
+  last_run: null,
+  next_run: null,
+  running: false,
+  running_since: null,
+};
+
+let tasks: ScheduledTask[] = [];
+
+async function renderTab() {
+  render(<AutomationTab project={project} />);
+  await act(async () => {
+    await Promise.resolve();
+  });
+}
+
+beforeEach(() => {
+  vi.useFakeTimers({ shouldAdvanceTime: true });
+  tasks = [baseTask];
+  listScheduledTasks.mockClear();
+  runScheduledTaskNow.mockClear();
+});
+
+afterEach(() => {
+  vi.useRealTimers();
+});
+
+describe("AutomationTab run state", () => {
+  it("offers Run now for an idle task and says nothing about running", async () => {
+    await renderTab();
+    expect(screen.getByRole("button", { name: "Run now" })).toBeEnabled();
+    expect(screen.queryByText(/Running/)).toBeNull();
+  });
+
+  it("shows a running task as running, with elapsed time, and blocks a second trigger", async () => {
+    const startedSecondsAgo = new Date(Date.now() - 90_000).toISOString();
+    tasks = [{ ...baseTask, running: true, running_since: startedSecondsAgo }];
+    await renderTab();
+
+    // The whole point: a detached run is visible rather than silent.
+    expect(screen.getByText(/Running for 1m/)).toBeTruthy();
+    expect(screen.getByRole("button", { name: "Running…" })).toBeDisabled();
+  });
+
+  it("keeps polling after a trigger, so a run that has not registered yet still appears", async () => {
+    await renderTab();
+    const callsAfterLoad = listScheduledTasks.mock.calls.length;
+
+    // The runner needs a moment to write its state file; until then the task
+    // still reads as idle, which is exactly the window that used to look dead.
+    await act(async () => {
+      fireEvent.click(screen.getByRole("button", { name: "Run now" }));
+      await Promise.resolve();
+    });
+    expect(runScheduledTaskNow).toHaveBeenCalledWith("p1", "a1b2c3d4");
+
+    tasks = [{ ...baseTask, running: true, running_since: new Date().toISOString() }];
+    await act(async () => {
+      vi.advanceTimersByTime(2000);
+      await Promise.resolve();
+    });
+
+    expect(listScheduledTasks.mock.calls.length).toBeGreaterThan(callsAfterLoad);
+    expect(screen.getByRole("button", { name: "Running…" })).toBeDisabled();
+  });
+
+  it("stops polling once nothing is running", async () => {
+    await renderTab();
+    // No trigger, nothing running: the interval must not be armed at all.
+    const before = listScheduledTasks.mock.calls.length;
+    await act(async () => {
+      vi.advanceTimersByTime(30_000);
+      await Promise.resolve();
+    });
+    expect(listScheduledTasks.mock.calls.length).toBe(before);
+  });
+});

app/src/components/projects/home/AutomationTab.tsx

@@ -15,7 +15,7 @@ import Toggle from "../../ui/Toggle";
 import Modal from "../../ui/Modal";
 import StatusIndicator from "../../ui/StatusIndicator";
 import TaskEditorModal from "./TaskEditorModal";
-import { formatAge } from "./format";
+import { formatAge, formatRunningFor } from "./format";
 
 interface Props {
   project: Project;
@@ -59,6 +59,22 @@ export default function AutomationTab({ project }: Props) {
 
   useEffect(load, [load]);
 
+  // A task in flight is the one state this view cannot sit still for: runs are
+  // detached, so without polling "Run now" looks like it did nothing until the
+  // user reaches for Refresh. Polling stops as soon as nothing is running.
+  //
+  // `justTriggered` covers the gap between firing a run and the runner writing
+  // its state file — a second or two in which the task still reads as idle, and
+  // where giving up on polling would reproduce the exact silence this fixes.
+  const anyTaskRunning = tasks.some((t) => t.running);
+  const [justTriggered, setJustTriggered] = useState(0);
+  useEffect(() => {
+    if (!running) return;
+    if (!anyTaskRunning && Date.now() - justTriggered > 20_000) return;
+    const timer = setInterval(load, anyTaskRunning ? 5000 : 1500);
+    return () => clearInterval(timer);
+  }, [running, anyTaskRunning, justTriggered, load]);
+
   const withTask = async (taskId: string, label: string, fn: () => Promise<unknown>) => {
     setBusyTaskId(taskId);
     try {
@@ -185,6 +201,12 @@ export default function AutomationTab({ project }: Props) {
                     <span className="text-[10px] uppercase tracking-wide px-1.5 py-0.5 rounded-[var(--radius-control)] bg-[var(--bg-tertiary)] text-[var(--text-secondary)]">
                       {task.task_type}
                     </span>
+                    {task.running && (
+                      <StatusIndicator
+                        tone="busy"
+                        label={`Running ${formatRunningFor(task.running_since) ?? ""}`.trim()}
+                      />
+                    )}
                   </div>
                   <div className="text-xs text-[var(--text-secondary)] font-mono truncate">
                     {task.at ?? task.schedule}
@@ -202,14 +224,15 @@ export default function AutomationTab({ project }: Props) {
                   }
                 />
                 <Button
-                  disabled={busyTaskId === task.id}
+                  disabled={busyTaskId === task.id || task.running}
                   onClick={() =>
-                    withTask(task.id, "Run now", () =>
-                      runScheduledTaskNow(project.id, task.id),
-                    )
+                    withTask(task.id, "Run now", async () => {
+                      await runScheduledTaskNow(project.id, task.id);
+                      setJustTriggered(Date.now());
+                    })
                   }
                 >
-                  Run now
+                  {task.running ? "Running…" : "Run now"}
                 </Button>
                 <Button disabled={busyTaskId === task.id} onClick={() => setEditing(task)}>
                   Edit

app/src/components/projects/home/TaskEditorModal.test.tsx

@@ -60,6 +60,8 @@ const existingTask: ScheduledTask = {
   created_at: null,
   last_run: null,
   next_run: null,
+  running: false,
+  running_since: null,
 };
 
 async function renderEditor(task: ScheduledTask | null = null, project = baseProject) {

app/src/components/projects/home/format.ts

@@ -26,6 +26,21 @@ export function formatElapsed(ms: number): string {
   return `${days}d ago`;
 }
 
+/** "for 42s" / "for 4m" / "for 1h 12m" — elapsed phrasing for a run in flight.
+ *  Seconds are kept below a minute because the first thing anyone wants from a
+ *  freshly triggered run is evidence that it started at all. */
+export function formatRunningFor(iso: string | null | undefined): string | null {
+  if (!iso) return null;
+  const started = Date.parse(iso);
+  if (Number.isNaN(started)) return null;
+  const seconds = Math.max(0, Math.floor((Date.now() - started) / 1000));
+  if (seconds < 60) return `for ${seconds}s`;
+  const minutes = Math.floor(seconds / 60);
+  if (minutes < 60) return `for ${minutes}m`;
+  const hours = Math.floor(minutes / 60);
+  return `for ${hours}h ${minutes % 60}m`;
+}
+
 /** Uptime phrasing for a known start timestamp. */
 export function formatUptime(startedAtMs: number | undefined): string | null {
   if (startedAtMs === undefined) return null;

app/src/lib/types.ts

@@ -388,6 +388,10 @@ export interface ScheduledTask {
   last_run: string | null;
   /** Known only for enabled one-shot tasks; cron is not evaluated. */
   next_run: string | null;
+  /** A run is in flight right now (the runner's pid was verified live). */
+  running: boolean;
+  /** When that run started. Null unless `running`. */
+  running_since: string | null;
 }
 
 /** Mirrors Rust `ScheduleKind` — which of the scheduler's two `add` flags to

container/entrypoint.sh

@@ -434,17 +434,26 @@ chown -R claude:claude "$SCHEDULER_DIR"
 cron
 
 # Save environment variables for cron jobs (cron runs with a minimal env)
+#
+# HOME is deliberately NOT captured here. This entrypoint runs as root, so the
+# snapshot would record HOME=/root — and the task runner sources this file with
+# `set -a`, which would overwrite the HOME cron gives the job. Claude Code then
+# looks for its OAuth credential at /root/.claude/.credentials.json instead of
+# /home/claude/.claude/.credentials.json and every scheduled task dies with
+# "Not logged in · Please run /login". Cron still needs a HOME, so it is written
+# explicitly below with the value the `claude` user actually has.
 ENV_FILE="$SCHEDULER_DIR/.env"
 : > "$ENV_FILE"
 env | while IFS='=' read -r key value; do
     case "$key" in
-        ANTHROPIC_*|AWS_*|CLAUDE_CODE_*|TRIPLE_C_PERMISSION_MODE|PATH|HOME|LANG|TZ|COLORTERM|BROWSER|NODE_EXTRA_CA_CERTS|REQUESTS_CA_BUNDLE|SSL_CERT_FILE)
+        ANTHROPIC_*|AWS_*|CLAUDE_CODE_*|TRIPLE_C_PERMISSION_MODE|PATH|LANG|TZ|COLORTERM|BROWSER|NODE_EXTRA_CA_CERTS|REQUESTS_CA_BUNDLE|SSL_CERT_FILE)
             # Escape single quotes in value and write as KEY='VALUE'
             escaped_value=$(printf '%s' "$value" | sed "s/'/'\\\\''/g")
             printf "%s='%s'\n" "$key" "$escaped_value" >> "$ENV_FILE"
             ;;
     esac
 done
+printf "HOME='/home/claude'\n" >> "$ENV_FILE"
 chown claude:claude "$ENV_FILE"
 chmod 600 "$ENV_FILE"
 

container/triple-c-scheduler

@@ -8,17 +8,59 @@ SCHEDULER_DIR="${HOME}/.claude/scheduler"
 TASKS_DIR="${SCHEDULER_DIR}/tasks"
 LOGS_DIR="${SCHEDULER_DIR}/logs"
 NOTIFICATIONS_DIR="${SCHEDULER_DIR}/notifications"
+RUNNING_DIR="${SCHEDULER_DIR}/running"
 
 # ── Helpers ──────────────────────────────────────────────────────────────────
 
 ensure_dirs() {
-    mkdir -p "$TASKS_DIR" "$LOGS_DIR" "$NOTIFICATIONS_DIR"
+    mkdir -p "$TASKS_DIR" "$LOGS_DIR" "$NOTIFICATIONS_DIR" "$RUNNING_DIR"
 }
 
 generate_id() {
     head -c 4 /dev/urandom | od -An -tx1 | tr -d ' \n'
 }
 
+# Live run state for a task: prints "pid<TAB>started_epoch<TAB>log" and returns
+# 0 when the task is genuinely running, returns 1 otherwise.
+#
+# triple-c-task-runner writes the file and removes it from an EXIT trap, but a
+# trap cannot fire for SIGKILL or a container stop mid-run. So the pid is
+# checked rather than believed, and a state file whose process is gone is
+# cleared here — otherwise one hard stop leaves a task reading as "running"
+# forever, which is worse than no indicator at all.
+run_state() {
+    local id="$1"
+    local state_file="${RUNNING_DIR}/${id}.json"
+    [ -f "$state_file" ] || return 1
+
+    local pid
+    pid=$(jq -r '.pid // empty' "$state_file" 2>/dev/null)
+    if [ -z "$pid" ] || ! kill -0 "$pid" 2>/dev/null; then
+        rm -f "$state_file"
+        return 1
+    fi
+
+    printf '%s\t%s\t%s\n' \
+        "$pid" \
+        "$(jq -r '.started_epoch // 0' "$state_file")" \
+        "$(jq -r '.log // ""' "$state_file")"
+}
+
+# Compact elapsed time since an epoch, e.g. "8s", "4m12s", "1h07m".
+elapsed_since() {
+    local start="$1" now delta
+    now=$(date +%s)
+    delta=$(( now - start ))
+    [ "$delta" -lt 0 ] && delta=0
+    if [ "$delta" -ge 3600 ]; then
+        printf '%dh%02dm' $(( delta / 3600 )) $(( (delta % 3600) / 60 ))
+    elif [ "$delta" -ge 60 ]; then
+        printf '%dm%02ds' $(( delta / 60 )) $(( delta % 60 ))
+    else
+        printf '%ds' "$delta"
+    fi
+}
+
 # Reject a malformed cron expression at the point of entry.
 #
 # Without this an invalid schedule is written to a task file, and the next
@@ -85,8 +127,9 @@ Commands:
   enable       Enable a disabled task
   disable      Disable a task
   list         List all tasks
+  status       Show which tasks are running right now
   logs         Show execution logs
-  run          Manually trigger a task now
+  run          Manually trigger a task now (streams its log)
   notifications  Show or clear completion notifications
 
 Add options:
@@ -99,6 +142,10 @@ Add options:
 Remove/Enable/Disable/Run options:
   --id ID              Task ID (required)
 
+Status options:
+  --id ID              Show one task, including its last result when idle
+  --watch, -w          Refresh every 5s until the run finishes
+
 Logs options:
   --id ID              Show logs for a specific task (optional)
   --tail N             Show last N lines (default: 50)
@@ -313,8 +360,8 @@ cmd_disable() {
 
 cmd_list() {
     local found=false
-    printf "%-10s %-20s %-10s %-9s %-20s %s\n" "ID" "NAME" "TYPE" "ENABLED" "SCHEDULE" "PROMPT"
-    printf "%-10s %-20s %-10s %-9s %-20s %s\n" "──────────" "────────────────────" "──────────" "─────────" "────────────────────" "──────────────────────────────"
+    printf "%-10s %-20s %-10s %-9s %-20s %-12s %s\n" "ID" "NAME" "TYPE" "ENABLED" "SCHEDULE" "STATUS" "PROMPT"
+    printf "%-10s %-20s %-10s %-9s %-20s %-12s %s\n" "──────────" "────────────────────" "──────────" "─────────" "────────────────────" "────────────" "──────────────────────────────"
 
     for task_file in "$TASKS_DIR"/*.json; do
         [ -f "$task_file" ] || continue
@@ -333,12 +380,21 @@ cmd_list() {
             display_schedule="at $at"
         fi
 
+        local status state started
+        if state=$(run_state "$id"); then
+            started=$(printf '%s' "$state" | cut -f2)
+            status="running $(elapsed_since "$started")"
+        else
+            status="idle"
+        fi
+
         # Truncate long fields for display
         [ ${#name} -gt 20 ] && name="${name:0:17}..."
         [ ${#display_schedule} -gt 20 ] && display_schedule="${display_schedule:0:17}..."
         [ ${#prompt} -gt 30 ] && prompt="${prompt:0:27}..."
 
-        printf "%-10s %-20s %-10s %-9s %-20s %s\n" "$id" "$name" "$type" "$enabled" "$display_schedule" "$prompt"
+        printf "%-10s %-20s %-10s %-9s %-20s %-12s %s\n" \
+            "$id" "$name" "$type" "$enabled" "$display_schedule" "$status" "$prompt"
     done
 
     if [ "$found" = "false" ]; then
@@ -346,6 +402,78 @@ cmd_list() {
     fi
 }
 
+# Is anything running, and how far along is it?
+#
+# This is the command for the question "did my `run` do anything, or has it
+# stalled?" — `logs` alone cannot answer it, because a log that stops growing
+# looks identical whether Claude is thinking or the run is dead.
+cmd_status() {
+    local id="" watch=false
+
+    while [[ $# -gt 0 ]]; do
+        case "$1" in
+            --id)    id="$2"; shift 2 ;;
+            --watch|-w) watch=true; shift ;;
+            *) echo "Unknown option: $1" >&2; return 1 ;;
+        esac
+    done
+
+    while true; do
+        local any=false
+        for task_file in "$TASKS_DIR"/*.json; do
+            [ -f "$task_file" ] || continue
+            local tid
+            tid=$(jq -r '.id' "$task_file")
+            [ -z "$id" ] || [ "$tid" = "$id" ] || continue
+
+            local name state
+            name=$(jq -r '.name' "$task_file")
+            if state=$(run_state "$tid"); then
+                any=true
+                local pid started log
+                pid=$(printf '%s' "$state" | cut -f1)
+                started=$(printf '%s' "$state" | cut -f2)
+                log=$(printf '%s' "$state" | cut -f3)
+                echo "● RUNNING  $name ($tid)"
+                echo "    elapsed: $(elapsed_since "$started")   pid: $pid"
+                echo "    log:     $log"
+                # `claude -p` writes its answer in one go at the end, so a log
+                # with only its header is the normal state of a healthy run —
+                # print the tail only when there is something to show, rather
+                # than an empty "last output:" that reads like a stall.
+                # `|| true` throughout: under `set -e` a grep matching nothing
+                # would otherwise abort the whole command.
+                local tail_out=""
+                if [ -f "$log" ]; then
+                    tail_out=$({ grep -v '^===' "$log" || true; } \
+                        | { grep -v '^$' || true; } | tail -n 3)
+                fi
+                if [ -n "$tail_out" ]; then
+                    echo "    last output:"
+                    printf '%s\n' "$tail_out" | sed 's/^/      /'
+                fi
+            elif [ -n "$id" ]; then
+                echo "○ idle     $name ($tid)"
+                local latest
+                latest=$(ls -t "$LOGS_DIR/$tid"/*.log 2>/dev/null | head -1) || true
+                if [ -n "$latest" ]; then
+                    echo "    last run: $(basename "$latest" .log)  $(grep -o 'Exit code: [0-9]*' "$latest" | tail -1)"
+                fi
+            fi
+        done
+
+        if [ "$any" = "false" ] && [ -z "$id" ]; then
+            echo "Nothing running."
+        fi
+
+        [ "$watch" = "true" ] || break
+        # Stop watching once the thing being watched has finished.
+        [ "$any" = "true" ] || break
+        sleep 5
+        echo ""
+    done
+}
+
 cmd_logs() {
     local id="" tail_n=50
 
@@ -413,8 +541,53 @@ cmd_run() {
 
     local name
     name=$(jq -r '.name' "$task_file")
+
+    if run_state "$id" >/dev/null; then
+        echo "Task '$name' ($id) is already running — see: triple-c-scheduler status --id $id"
+        return 0
+    fi
+
     echo "Manually triggering task '$name' ($id)..."
-    /usr/local/bin/triple-c-task-runner "$id"
+
+    # Run in the background and stream its log. A task can easily think for
+    # minutes, and the previous behaviour — block with no output until it is
+    # over — is indistinguishable from a hang.
+    /usr/local/bin/triple-c-task-runner "$id" &
+    local runner_pid=$!
+
+    local state="" waited=0
+    while [ "$waited" -lt 20 ]; do
+        if state=$(run_state "$id"); then
+            break
+        fi
+        kill -0 "$runner_pid" 2>/dev/null || break
+        sleep 0.5
+        waited=$(( waited + 1 ))
+    done
+
+    local log=""
+    [ -n "$state" ] && log=$(printf '%s' "$state" | cut -f3)
+
+    if [ -n "$log" ]; then
+        echo "  log:     $log"
+        echo "  elsewhere: triple-c-scheduler status --id $id --watch"
+        echo ""
+        # --pid stops the follow when the runner exits, so this returns on its own.
+        tail -n +1 -f --pid="$runner_pid" "$log" 2>/dev/null
+    fi
+
+    local rc=0
+    wait "$runner_pid" || rc=$?
+
+    # A run short enough that its state file was never observed still deserves
+    # its output shown rather than swallowed.
+    if [ -z "$log" ]; then
+        local latest
+        latest=$(ls -t "$LOGS_DIR/$id"/*.log 2>/dev/null | head -1) || true
+        [ -n "$latest" ] && tail -n 20 "$latest"
+    fi
+
+    return $rc
 }
 
 cmd_notifications() {
@@ -464,6 +637,7 @@ case "$command" in
     enable)        cmd_enable "$@" ;;
     disable)       cmd_disable "$@" ;;
     list)          cmd_list ;;
+    status)        cmd_status "$@" ;;
     logs)          cmd_logs "$@" ;;
     run)           cmd_run "$@" ;;
     notifications) cmd_notifications "$@" ;;

container/triple-c-task-runner

@@ -9,6 +9,7 @@ SCHEDULER_DIR="${HOME}/.claude/scheduler"
 TASKS_DIR="${SCHEDULER_DIR}/tasks"
 LOGS_DIR="${SCHEDULER_DIR}/logs"
 NOTIFICATIONS_DIR="${SCHEDULER_DIR}/notifications"
+RUNNING_DIR="${SCHEDULER_DIR}/running"
 ENV_FILE="${SCHEDULER_DIR}/.env"
 
 TASK_ID="${1:-}"
@@ -34,11 +35,19 @@ if ! flock -n 200; then
 fi
 
 # ── Source saved environment ─────────────────────────────────────────────────
+# The env file is a snapshot taken by the entrypoint, which runs as root. A
+# snapshot written before the entrypoint stopped capturing HOME still carries
+# HOME=/root, and `set -a` would apply it to `claude` below — which then finds no
+# credential under /root/.claude and exits with "Not logged in". The env file
+# lives on the home volume, so those stale copies outlive an image update until
+# the container is restarted; keep our own HOME regardless of what it says.
 if [ -f "$ENV_FILE" ]; then
+    REAL_HOME="${HOME:-/home/claude}"
     set -a
     # shellcheck disable=SC1090
     source "$ENV_FILE"
     set +a
+    HOME="$REAL_HOME"
 fi
 
 # ── Read task definition ────────────────────────────────────────────────────
@@ -69,6 +78,27 @@ mkdir -p "$TASK_LOG_DIR"
 TIMESTAMP=$(date +"%Y%m%d-%H%M%S")
 LOG_FILE="${TASK_LOG_DIR}/${TIMESTAMP}.log"
 
+# ── Publish run state ───────────────────────────────────────────────────────
+# A scheduled run is detached — cron has no terminal, and the app fires it as a
+# detached exec — so without this there is no way to tell a task that is still
+# thinking from one that died, and a long run reads as a stall. `list`, `status`
+# and the app's Automation tab all read this file.
+#
+# flock above is what actually prevents overlapping runs; this is purely an
+# observability record, which is why readers verify the pid rather than trust
+# the file. The EXIT trap covers the crash paths (OOM, container stop, SIGTERM)
+# that would otherwise leave a task looking like it had been running for days.
+mkdir -p "$RUNNING_DIR"
+RUN_STATE="${RUNNING_DIR}/${TASK_ID}.json"
+trap 'rm -f "$RUN_STATE"' EXIT
+jq -n \
+    --arg pid "$$" \
+    --arg started "$(date +%s)" \
+    --arg log "$LOG_FILE" \
+    --arg name "$TASK_NAME" \
+    '{pid: ($pid | tonumber), started_epoch: ($started | tonumber), log: $log, name: $name}' \
+    > "$RUN_STATE"
+
 # ── Execute Claude agent ────────────────────────────────────────────────────
 {
     echo "=== Task: $TASK_NAME ($TASK_ID) ==="