shadow-testandClaude Opus 5
32149603b2
The previous commit moved `down` to the top of `up` to fix a resolv.conf idempotency bug, and in doing so put it *before* every network fetch that can fail. Re-review caught it and I reproduced it: with a tunnel up, an `up` that fails on bad credentials left `pia0` gone and traffic silently back on the real address, while the error talked only about credentials. A privacy regression introduced by a correctness fix. `down` now runs after the token, server list and key registration have all succeeded — nothing above that line touches the network stack — and still clears the stale backup it was added for. Everything after it is covered by a rollback. Note this is an EXIT trap with a flag, not `trap ... ERR`: my first attempt used ERR and did not fire at all, because ERR is not inherited by shell functions without `set -E`, so a failure inside add_route missed it, and `die` exits explicitly, which is not an error. Verified by forcing a route collision — the tunnel is torn down and DNS is intact, where before the fix it was left half-configured with DNS dead. Also from the review: - **The private key lived on disk for the whole life of the tunnel.** `commit_container_snapshot` blanks env vars, never files, and nothing tears the tunnel down before a recreate or migrate — so the `down`-time cleanup never covered the path that put a key in a snapshot in the first place. It is now deleted the moment `wg set` has read it; the kernel keeps its own copy, verified by checking the interface still works afterwards. - **`up` claimed success without a handshake.** An unreachable peer still routes — into a black hole — so `up --full` could exit 0 having pointed all traffic and resolv.conf at a peer that never answered, with `status` printing "mode: full tunnel". Now polls for a handshake and rolls back if none arrives. - **`status` needed root and did not check.** `wg show` fails unprivileged and was swallowed, so an unprivileged run printed "no tunnel up" and then "mode: full tunnel" in the same breath. An agent reading the first line would re-run `up` — which, before the fix above, destroyed the tunnel it failed to see. - **The killswitch bullet was false.** It said `iptables` is not in the image; it is, so a killswitch is buildable. It stays unbuilt because it would cut Claude Code's own API traffic — an honest reason, unlike the previous one. - `install_feature_skill` rejects path-traversal names, not just blank ones — verified `../skills` would have deleted the whole skills directory including Mission Control's — and reports `mkdir`/`cp` failures instead of printing a success line regardless. - The usage text ended by printing `set -euo pipefail`, off by one line. - HOW-TO-USE claimed "the container says so on start". entrypoint prints to PID 1's stdout, which no terminal or UI surfaces — `docker logs` appears nowhere in the repo. Now points at the migration pre-flight, which does. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
10 KiB
name, description
| name | description |
|---|---|
| pia-vpn | Connect this container's traffic through a PIA VPN tunnel over WireGuard, or diagnose one that is not working. Use when asked to enable, route through, check, or tear down a VPN, when traffic needs to leave from a different location, or when DNS or connectivity broke after a VPN was brought up. |
PIA VPN
Bring this container's traffic out through Private Internet Access over WireGuard, using the API PIA documents for headless use.
Run sudo ~/.claude/skills/pia-vpn/pia-wg.sh with up, up --full, down or
status. Read the rest of this page before the first up --full — three of the
behaviours below are actively misleading if you meet them without warning, and
each one presents as "the VPN is fine" or "Claude is broken" rather than as
what it is.
Before anything else: what the toggle does not do
Triple-C's VPN support setting grants three things — CAP_NET_ADMIN, the
/dev/net/tun device, and the net.ipv4.conf.all.src_valid_mark sysctl — and
stops there. It starts no client, builds no tunnel and changes no route.
So "the VPN is enabled but traffic isn't going through it" is normally not a
fault. It means the capability is present and nothing has used it yet. Check
with status before assuming something is broken.
If the toggle is off, the script says so and names the setting. It cannot be
turned on from inside the container; the user changes it in Config → Runtime,
and it recreates the container on the next start (home and .claude volumes
are preserved — it is not a Reset).
Two modes
| routes | use when | |
|---|---|---|
up |
only 1.1.1.1/32 |
verifying the tunnel works without disturbing anything |
up --full |
all public traffic | you actually want traffic leaving via PIA |
Prefer up first. It proves the handshake, credentials and region are good
while your own connectivity is untouched, so a failure is cheap.
up --full routes Claude Code's own API traffic through PIA. If the tunnel
drops, that traffic stops until it recovers or you run down. Say so before
running it — the user may be mid-session, and they will experience the failure
as Claude going away, not as a VPN problem.
Trap 1: a full tunnel takes DNS with it
The container resolves through an address on the Docker network — under Docker
Desktop, 192.168.65.7 — which sits outside the container's own subnet. A
default route of 0.0.0.0/0, or the 0.0.0.0/1 + 128.0.0.0/1 pair, captures
it and posts every lookup into a tunnel that cannot carry private traffic.
Nothing resolves after that. The visible symptom is Claude Code reporting it
cannot connect, because api.anthropic.com no longer resolves:
$ curl https://api.anthropic.com/v1/messages
* Could not resolve host: api.anthropic.com (rc=6)
pia-wg.sh already handles this: it routes 10.0.0.0/8, 172.16.0.0/12,
192.168.0.0/16 and 169.254.0.0/16 back via the original gateway, then pins
PIA's own resolvers through the tunnel with /32 routes that outrank the
10/8 exclusion. If you ever route traffic by hand, you owe both halves — the
exclusions and a resolver reachable from wherever you pointed the default.
The failure has a quiet twin. Do only the first half — exclude the private
ranges, leave the resolver alone — and everything works, while every DNS
query travels outside the tunnel to your ISP. A VPN that leaks the full list of
what you looked up is worse than one that is visibly broken, so up --full
refuses to proceed if PIA does not hand back resolvers rather than carrying on
without them.
The mechanism above is Docker Desktop's. On a user-defined Docker network the
resolver is 127.0.0.11, which is loopback and never captured by a default
route — the trap still exists there (that resolver forwards upstream from
inside the container's namespace) but arrives by a different path. Check
/etc/resolv.conf rather than assuming which case you are in.
Trap 2: an IP-literal health check cannot see a dead resolver
curl https://1.1.1.1/cdn-cgi/trace needs no DNS, so it returns a cheerful
PIA exit address while name resolution is entirely broken. A tunnel verified
that way looks perfect and works for nothing.
status resolves a real name for this reason. Trust its DNS: line, and if
you check by hand, resolve a name rather than fetching an address.
Trap 3: in test mode, the obvious probe is the one thing tunnelled
up routes 1.1.1.1 and nothing else. So checking your address by fetching
https://1.1.1.1/cdn-cgi/trace reports a PIA address — not because your
traffic is going through PIA, but because that single probe is. Everything else
still leaves directly.
This reads exactly like a working full tunnel, and it is the likeliest reason
someone concludes the VPN is on when it is not. status prints both exits in
test mode for this reason:
mode: test route only (1.1.1.1 through the tunnel, nothing else)
through the tunnel: 64.113.5.73
everything else: 172.116.197.166 <- your real address
Two different addresses there is correct and expected in test mode. If you want
the second line to change, you want up --full.
Trap 4: no tunnel survives a restart, and it fails open
The network namespace is rebuilt every time the container starts, and nothing inside reconnects anything. After a stop/start, Reset or any config change that recreates the container, the interface and its routes are gone.
State under /run/pia-wg rides the snapshot and persists, so leftover files
make it look as though the tunnel is still configured. It is not. Traffic goes
out the real address with no error and nothing visibly different.
Never infer from /run/pia-wg that a tunnel is up. Run status — if the
handshake line is missing, there is no tunnel. Re-run up after every start.
Credentials
Two lines in ~/pia-creds — username, then password:
p1234567
your-password
Treat the contents as secret: never print the file, never echo the values, and
never include them in a commit, a log or a message. The script reads it directly
and does not echo it, and passes PIA's session token to curl on stdin rather
than in the argv, where ps would expose it to everything in the container.
PIA_CREDS points somewhere else — but sudo resets the environment, so it
only takes effect after the word sudo:
sudo PIA_CREDS=/path/to/creds ~/.claude/skills/pia-vpn/pia-wg.sh up # works
PIA_CREDS=/path/to/creds sudo ~/.claude/skills/pia-vpn/pia-wg.sh up # ignored
The second form fails silently back to the default path. Same for PIA_REGION.
Regions
Defaults to us_chicago. Override with PIA_REGION:
sudo PIA_REGION=uk_london ~/.claude/skills/pia-vpn/pia-wg.sh up --full
List the ids:
curl -s https://serverlist.piaservers.net/vpninfo/servers/v6 \
| head -1 | jq -r '.regions[].id'
Verifying
status prints the handshake, DNS, and which address traffic actually leaves
from — labelled by mode, so the answer cannot be misread:
latest handshake: 2 seconds ago
transfer: 92 B received, 180 B sent
DNS: ok (via 10.0.0.243 10.0.0.242)
mode: full tunnel
all traffic exits: 64.113.5.244
All of it matters. A handshake with DNS: BROKEN is trap 1. mode: test route only with two different addresses is trap 3, and is correct — it means the
tunnel works and you have not asked for it to carry anything yet. Report the
mode line when telling someone the VPN is on; "the public IP is a PIA one" is
true in test mode too, and means much less than it sounds like.
Tearing down
down restores resolv.conf from its backup (only if that backup still looks
like a resolver file — restoring a truncated one would leave the container with
no DNS at all), removes exactly the routes that were added, in reverse order,
and deletes the interface. It is safe to run when nothing is up. Confirm
afterwards that the public address is back to the container's own.
up calls it too, but only after every network fetch has succeeded, so a
failed up leaves an existing tunnel alone rather than tearing it down to
report a bad password. From that point on a rollback is armed: if any step of
the setup fails, the tunnel is torn down rather than left half-configured.
The private key is deleted earlier still — the moment wg set has read it,
while the tunnel is being built. That is not housekeeping: /run is in the
container's writable layer, and recreating or migrating the project runs
docker commit over it without tearing the tunnel down first. A key that
lived for the tunnel's lifetime would be baked into the snapshot image and
copied forward from then on. The kernel keeps its own copy, so nothing is lost.
What this deliberately does not do
- No killswitch.
iptablesis in the image, so one is buildable — this is a deliberate omission, not a missing dependency. Blocking non-tunnel egress cuts Claude Code's own API traffic the moment the tunnel drops, which ends the session that would otherwise fix it. If the user needs guaranteed egress rather than convenient egress, say so plainly and let them decide, rather than improvising one. - No autostart. There is no service manager in the container and Triple-C
has no start hook, so nothing re-establishes the tunnel on its own.
cronis in the image andtriple-c-schedulerruns on it, so a scheduled reconnect is possible if the user wants one — it is just not set up, and a tunnel that reconnects unattended deserves an explicit decision. - Not PIA's desktop client.
pia-daemonandpiactlare installable but cannot work headless: the daemon never accepts a client connection without the GUI, andpiactl --helpstates that connecting requires it. If you find one installed, it is not a working alternative to this script. - Not
wg-quick. ItsTable=autofull-tunnel mode routes by firewall mark and needsxt_CONNMARKfrom the host kernel, which Docker Desktop for Windows (WSL2) does not have and a container cannot load. This script adds the routes withip routedirectly, which works on every host. - IPv4 only. The
0.0.0.0/1+128.0.0.0/1pair covers v4. A container with a global IPv6 address and a v6 default route would leak all v6 traffic outside the tunnel; Triple-C's containers do not have one by default, but checkip -6 route show defaultbefore relying on this where it matters.