Consolidate client/API information to a new section (#630)

This commit is contained in:
Jeff Mitchell authored and GitHub committed 2020-10-12 14:46:17 -04:00
1 parent 837e9eb0cc
commit e162f9f183
7 files changed
+62 -73

No files matched your search

@@ -1,80 +0,0 @@
---
layout: docs
page_title: CLI Behavior
sidebar_title: CLI Behavior
description: |-
Boundary's CLI behavior
---
# CLI Behavior
Boundary's CLI has predictable behavior throughout its various commands. This page details the common patterns in used in order to help users make better use of the CLI.
## Parameter Handling
All parameters specified on the CLI are specified as a Go-style flag with a single dash, e.g. `-id`. The arguments to those flags can be specified via an equals sign, as in `-id=r_1234567890`, or a space, like `-id r_1234567890`.
To see available parameters, pass the `-h` flag to any command.
Flags are semi-position dependent. The flags must come _after_ the command definition, but are otherwise order independent.
For instance, the following are equivalent:
* `boundary roles create -scope-id global -name foo`
* `boundary roles create -name foo -scope-id global`
But the following results in an error:
* `boundary roles -name foo -scope-id global create`
This applies to `-h` as well!
### Connection Options
Every command that results in an API call contains a set of flags that control connection options, which control TLS and other settings for the connection.
### Client Options
Every command that results in an API call contains a set of flags that control client options. Some notable options:
* `output-curl-string`: This will format the command that would have been run as a string using `curl` that can be used directly on the command line. This is a great way to discover how CLI functions map to API calls.
* `token-name`: When the CLI authenticates, it stores the token in the platform-specific OS credential store. By using the `token-name` parameter, more than one token can be stored at a time. Specifying this parameter at authentication time uses the given name as part of the key for storage; specifying it for any other command will cause the corresponding token to be used for that call.
* `recovery-config`: This is used to specify a configuration file that contains the information necessary to access a KMS configured to be used for the recovery workflow within a Boundary controller.
### Output Options
Nearly every command supports having its success output be formatted as JSON via `-format json`. For commands that result in an API call, the JSON output will be the exact output from the controller. If using the output of the CLI in scripts or as parameters to other tools, _always_ use formatted output. The default text output is meant for human users and the formatting or the information included within that output from the original JSON may change at any time.
## Mapping to Collections and Sub-Types
Generally speaking, Boundary's CLI commands map to the collections they operate on. For instance, when operating on roles, the command will be `boundary roles ...`.
As a result, the patterns for reading, deleting, and listing are predictable:
* `boundary <collection> read`
* `boundary <collection> delete`
* `boundary <collection> list`
`read` and `delete` will always operate on a particular resource identifier, so will always take in an `-id` parameter. `list` operates on collections so will either take a `-scope-id` parameter or, depending on type, a higher level resource identifier, e.g. `-auth-method-id`.
Creating and updating resources may take an extra parameter if the resource type is abstract, that is, if the type cannot be operated on directly but must be operated on through an implementation. As an example, a role is not an abstract type, and does not have various implementations of it. As a result, a role can be operated on directly:
* `boundary roles create`
* `boundary roles update`.
However, a target can be one of many types of targets, and a concrete implementation of a target is a `tcp` type of target. Therefore an extra parameter is required when creating or updating a target:
* `boundary targets tcp create`
* `boundary targets tcp update`
This allows the CLI to perform proper presentation and validation of parameters and functions for the given type.
Similar to `read`, `update` operates on an existing target so will always take an `-id` parameter. Similar to `list`, `create` operates on a collection so will either take a `-scope-id` parameter or a parameter defining the parent resource.
## Completion
Boundary's CLI supports autocompletion. For Bash, the following line in a `~/.bash_profile` or similar file will work:
`complete -C /path/to/boundary boundary`
This will allow tab completion of commands, flags, and in some cases the parameters to those flags.
@@ -1,80 +0,0 @@
---
layout: docs
page_title: HTTP API Standards
sidebar_title: HTTP API Standards
description: |-
Boundary's HTTP API standards
---
# HTTP API Standards
Boundary's HTTP API adheres to a set of standards that are rigidly followed. At its core, it is a standards-compliant JSON API for both input and output.
Before reading this page, it is useful to understand Boundary's [domain model](/docs/concetps/domain-model) to be aware of the terminology used here.
Boundary's API is also described via OpenAPI v2; the version corresponding to any tag of Boundary's source code can be found in Boundary's [GitHub repository](https://github.com/hashicorp/boundary/blob/main/internal/gen/controller.swagger.json).
Boundary's current API version is 1; all API paths begin with `/v1/`.
## Status Codes
* `2XX`: Boundary returns a code between `200` and `299` on success. Generally this is `200`, but implementations should be prepared to accept any `2XX` status code as indicating success. If a call returns a `2XX` code that is not `200`, it will follow well-understood semantics for those status codes.
* `400`: Boundary returns `400` when a command cannot be completed due to invalid user input, except for a properly-formatted identifier that does not map to an existing resource, which will return a `404` as discussed below.
* `401`: Boundary returns `401` if no authentication token is provided or if the provided token is invalid. A valid token that simply does not have permission for a resource will return a `403` instead. A token that is invalid or missing, but where the anonymous user (`u_anon`) is able to successfully perform the action, will not return a `401` but instead will return the result of the action.
* `403`: Boundary returns `403` if a provided token was valid but does not have the grants required to perform the requested action.
* `404`: Boundary returns `404` if a resource cannot be found. Note that this happens _prior_ to authentication/authorization checking in nearly all cases as the resource information (such as its scope, available actions, etc.) is a required part of that check. As a result, an action against a resource that does not exist will return a `404` instead of a `401` or `403`. While this could be considered an information leak, since IDs are randomly generated and this only discloses whether an ID is valid, it's tolerable as it allows for far simpler and more robust client implementation.
* `405`: Boundary returns a `405` to indicate that the method (HTTP verb or custom action) is not implemented for the given resource.
* `500`: Boundary returns `500` if an error occurred that is not (directly) tied to invalid user input. If a `500` is generated, information about the error will be logged to Boundary's server log but is not generally provided to the client.
## Path Layout
Boundary follows a predictable path layout. There are two fundamental types of URL paths, each supporting a different set of operations.
### Collections
Collections of resources are top level paths with plural English names for the resource, e.g. `/roles` and `/hosts`. Collections support the following operations:
* Creation of new resources within that collection
* Listing of resources within that collection
All collection operations require supplying the enclosing resource. Depending on the collection type, this will be one of the following:
* A scope, indicating the scope in which an operation should take place. For instance, a POST to `/roles` would need to indicate whether the role should be created within the `global` scope or some organization scope like `o_1234567890`.
* A parent resource of the appropriate type. For instance, hosts and host sets are child resources of host catalogs. When creating a new host set within a host catalog, a POST to `/host-sets` would need to indicate the host catalog ID with which the host-set should be associated.
### Resources
Resources themselves are defined by ID specifiers within a collection path, e.g. `/roles/r_1234567890`. Resources support the following operations:
* Reading a resource's properties
* Updating a resource's properties
* Deleting a resource
* Custom methods specific to a resource type
Depending on the resource type, various parameters may be available. Some are common across all resource types (e.g. `name` and `description`); others are available only for specific types. Further, some concrete-types of abstract resources include an opaque `attributes` JSON object with type-specific values.
For instance, an authentication method is an abstract type; a `password` authentication method is a concrete implementation of that type. When creating such an auth method, a `type` parameter will indicate that it should be the `password` type, while values specific to the `password` type auth method, such as minimum password length, will be contained within an `attributes` object.
## Methods
The following method conventions are used within Boundary's API:
### GET
`GET` is used for reading a resource or listing resources in a collection. The behavior depends on whether the `GET` is issued against a collection (`/roles`) or a singular resource (`/roles/r_1234567890`). In the former case it lists resources within the collection; in the latter it performs a read on that particular resource.
### POST
`POST` is used for creating a resource or performing custom actions against a resoruce. When creating a resource, `POST` is used against a collection (`/roles`). When performing a custom action, `POST` is used against a particular resource (`/roles/r_1234567890:set-principals`).
### PATCH
`PATCH` is used to update a resource's parameters. The following are behaviors to be aware of when using `PATCH`:
* In nearly all cases, a `version` parameter is required. This is used for check-and-set, to ensure that the update operation is being performed against a known resource. The version parameter is returned from a `GET` operation on the resource so the current version, along with the resource's other current values, can be looked up at any time.
* Passing a JSON `null` for a parameter has the effect of reverting that parameter to its default. For some parameters (e.g. `name`) this will simply clear the value (as the default `name` for a resource is empty); for other parameters this will revert to the current defaults within Boundary.
* All parameters specified as part of a `PATCH` operation will be considered to be parameters that should be updated.
### DELETE
`DELETE` is used for deleting a specific resource, and is only used against a particular resource path.
@@ -1,12 +0,0 @@
---
layout: docs
page_title: API
sidebar_title: API
description: |-
An introduction to Boundary's API.
---
# Boundary API
This section covers our API, including information about its underlying model
and how the CLI implements support for the API.