Most of the changes here are changes or enhancements that are useful for
tests. The crux of the issue was that I had pulled up one var to the
package level so it could be read from tests, but that var was not being
reset between tests. It's not even used in tests anymore, so I put it
back to function-local.
This makes it much easier to figure out when and why rotation is
happening and control it for tests/debugging.
Remove cert skew
Cherry-picked from release/0.12.x
* chore (dev/ldap): update gldap dependency
This update fixes the dup entries returned when searching for users
and/or groups
* feat (boundary/dev): add connection info for dev ldap server
This adds a new mechanism for worker authentication that uses the
third-party arbitration of the original KMS flow by leveraging
recently-added capabilities in nodeenrollment to support a registration
wrapper. This allows for workers to be registered to the system with
just a name and a matching wrapper, while at the same time allowing
these workers to be used for private Vault access and multi-hop as they
contain per-worker encryption keys and support rotation.
Nodes using this mode will generate and rotate credentials in-memory
(using another recently added nodeenrollment capability) so will have a
new set of keys on every startup. This has the side effect of ensuring
that there is never a conflict or re-use of these credentials.
Note that the normal test worker flow was using the now-deprecated KMS
method; there is still a test that uses this (explicitly) but all other
tests using test workers that did not specify a specific PKI flow now
actually use this mechanism. This means there is fairly decent test
coverage in a general sense, plus the specific tests updated/added for
this feature.
This also adds a new KMS type that can be used to have
distinct KMSes for upstream authentication vs. accepting from
downstream.
- Refactor the Target domain repository functions so that they no longer return 4 different types.
`Target` struct now contains `HostSource` & `CredentialSources` with Getters & Setters
- Extending `Target` to contain `HostSource` & `CredentialSources` enables `funcs` to just return `Target` instead of multiple return types.
This also allows easy future refactors and extensions of `Target`
* feature (auth): required schema changes for auth ldap method (#2669)
chore (auth/ldap): move schema changes to next avail migration number
* feature (auth/ldap): define AuthMethod and all its value objects (#2703)
* feature (auth/ldap): storage protos
* feature (auth/ldap): define AuthMethod and all its value objects
* feature (auth/ldap): add repo and reading an auth method (#2718)
* feature (auth/ldap): add Repository.CreateAuthMethod(...) and Repository.DeleteAuthMethod(...) (#2724)
* feature (auth/ldap): add Repository.UpdateAuthMethod(...) (#2739)
* feature (auth/ldap): add Account
* feature (auth/ldap): add AuthMethod.EnableGroups
* fix (auth/ldap): refactor AuthMethod.oplog to enforce proper constraints
* feature (auth/ldap): add Account repo functions
* refactor (auth/ldap): remove entry attributes from account
Realized the entry attributes could have absolutely anything in them
(including binary data) and since we absolutely don't have to have them
there's just no reason to take on the risk.
* feature (auth/ldap): add AuthMethod.UseTokenGroups
* feature (auth/ldap): add Authenticate(...)
* refactor (auth/ldap): ensure options take a context as the 1st parameter
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): make fmt deltas
* feature (auth/ldap): add managed groups (#2760)
* tests (auth/ldap): add missing unit test to Repository.DeleteAccount(...)
Add bits to test the delete operation when you're not able to generate
oplog metadata
* feature (auth/ldap): add managed groups
fixup! feature (auth/ldap): add managed groups (#2760)
* feature (auth/ldap): service proto definition (#2761)
* feature (handlers/authmethods): add handlers for ldap auth method operations (#2794)
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): update cap/ldap to latest version
* feature (auth/ldap): add ldap api generation definitions
* feature (authmethods): add ldap repo NewService(...)
* feature (authmethods/ldap): add proper mask_mapping to protobufs
* feature (authmethods): add support to get an ldap auth method
* refactor (auth/ldap): export TestGenerateCA(...)
* feature (authmethods): add support to create an ldap auth method
* feature (authmethods): add support to delete an ldap auth method
* feature (authmethods): add support to list ldap auth methods
* refactor (auth/ldap): make urls optional for NewAuthMethod(...)
* refactor (auth/ldap): export ldap.TestInvalidPem
* chore: make fmt changes
* fix (auth/ldap): properly handle group search config
Add constraints and tests to ensure when an ldap AuthMethod.EnableGroups
is true, and UseTokenGroups is false; that there's a GroupDn configured
for finding a user's associated groups
* feature (authmethods): add support to update an ldap auth methods
* chore (db/ldap): tmp mv migrations so there's no conflict with ongoing work
* feature (verifier): add ldap auth method to verifier bits
* fix (controller): prevent panic when controller stops when there's no listener
* feature (authmethods): add support to authenticate via ldap auth methods
* chore (migrations): fix whitespace in stmt
* chore: fmt fixup
* tests (auth/ldap): invalid err msg
* feature (cli/authmethods): add support for ldap auth-methods CRUD and authenticate (#2810)
* feature (authmethods): add CLI support for ldap auth methods CRUD
* tests (api/auth): ldap auth method classification tests
* feature (authmethods): add CLI support for ldap auth authenticate
* feature (auth/ldap): set request timeouts for ldap server connections
* feature (handlers/authmethods): handle u_anon listing properly.
* feature (account/handers): ldap account and managed group CRUDL APIs (#2852)
* feature (auth/ldap) add repository Listing of ManagedGroupMemberAccount
* feature (controller/handlers): add ldapRepoFn to accounts service
* feature (auth/ldap) register ldap managed group subtype
* feature (account/handlers): ldap account CRUDL APIs
* feature (controller/handlers): add ldapRepo to managed groups service
* feature (account/handlers): ldap managed group CRUDL APIs
* docs (domain): add LDAP accounts, auth-methods and managed groups (#2857)
* feature (ldap/cli) add ldap accounts and managed groups CRUDL commands (#2856)
* fix (handlers/authmethods): fix ldap authorized actions (#2892)
* feature (cli/ldap/authenticate): use primary auth method if none is provided (#2890)
* fix (auth/ldap): support setting the state attribute
* feature (cli/ldap/authenticate): use primary auth method if none is provided
* feature (wh/ldap) add tests for new ldap auth method and accounts (#2919)
* refactor (migrations/ldap): mv to correct directory
* chore: add copyright headers
* fix (api/authmethods/ldap): renumber new LdapAuthMethodAttributes field
* fix (auth/ldap): allow the auth method state to be updated (#2951)
* chore: update sdk and api versions for llb - this is tmp until merging
* tests (managed groups): add required errContains for new test
The `boundary connect` subcommands attempt to parse the credentials to
use for brokering. This allows the subcommands to insert the credentials
automatically into the process called by the subcommand, i.e. `ssh` or
`psql`. There is some fallback logic to try a best attempt at parsing
the credential in cases where a credential type has not be set on the
credential source.
The bug was introduced with the recent change to the vault credential
library subtype being renamed from `vault` to `vault-generic`. This
fallback logic would only run if the credential source type was "vault"
or "static", so if the vault credential library was created without
specifying a credential-type, the credential would not be parsed and
automatically passed to the sub-process.
This fix removes the additional check on the credential source's type,
instead it will attempt to parse the credential, relying just on the
structure of the credential.
This also fixes a similar bug in the table output of secrets when using
`boundary connect` without a subcommand. The parsing of the credentials
for display in the table was only running for `vault` or `static`.
Blame: db42eafd7a
* chore: Upgrade Go version
* fix: Upgrade golangci-lint to support 1.20
* fix: Don't use t.SetEnv in parallel tests
This is a panic in Go 1.20 and it sounds like a recipe
for distaster in general.
This commit replaces `os.MkdirTemp` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests [complete.
Prior to this commit, temporary directory created using `os.MkdirTemp`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
When using the json output of the cli (`-format=json`), a successful
call to the controller API would place the HTTP status code in the JSON
as `status_code`. However, if there was an error from the API the status
code would be placed in the JSON as `status`. In order to be consistent,
this adds a `status_code` field to the error response case. For
backwards compatibility it still populates `status` in the error case.
This inconsistency was missed partially due to a bug in the CLI tests.
The assertion on status code was not valid and would always be
successful. Thus this also fixes the assertions and tests.
Timothy Messier
irenarindos
Johan Brandhorst-Satzkorn
Todd
Louis Ruch
Jim
Danielle Miu
Michael Milton
Jeff Mitchell
Haotian
Chris van Meer
Hugo Vieira
Elim Tsiagbey
Eng Zer Jun