This makes it much easier to figure out when and why rotation is
happening and control it for tests/debugging.
Remove cert skew
Cherry-picked from release/0.12.x
This adds a new mechanism for worker authentication that uses the
third-party arbitration of the original KMS flow by leveraging
recently-added capabilities in nodeenrollment to support a registration
wrapper. This allows for workers to be registered to the system with
just a name and a matching wrapper, while at the same time allowing
these workers to be used for private Vault access and multi-hop as they
contain per-worker encryption keys and support rotation.
Nodes using this mode will generate and rotate credentials in-memory
(using another recently added nodeenrollment capability) so will have a
new set of keys on every startup. This has the side effect of ensuring
that there is never a conflict or re-use of these credentials.
Note that the normal test worker flow was using the now-deprecated KMS
method; there is still a test that uses this (explicitly) but all other
tests using test workers that did not specify a specific PKI flow now
actually use this mechanism. This means there is fairly decent test
coverage in a general sense, plus the specific tests updated/added for
this feature.
This also adds a new KMS type that can be used to have
distinct KMSes for upstream authentication vs. accepting from
downstream.
* feature (auth): required schema changes for auth ldap method (#2669)
chore (auth/ldap): move schema changes to next avail migration number
* feature (auth/ldap): define AuthMethod and all its value objects (#2703)
* feature (auth/ldap): storage protos
* feature (auth/ldap): define AuthMethod and all its value objects
* feature (auth/ldap): add repo and reading an auth method (#2718)
* feature (auth/ldap): add Repository.CreateAuthMethod(...) and Repository.DeleteAuthMethod(...) (#2724)
* feature (auth/ldap): add Repository.UpdateAuthMethod(...) (#2739)
* feature (auth/ldap): add Account
* feature (auth/ldap): add AuthMethod.EnableGroups
* fix (auth/ldap): refactor AuthMethod.oplog to enforce proper constraints
* feature (auth/ldap): add Account repo functions
* refactor (auth/ldap): remove entry attributes from account
Realized the entry attributes could have absolutely anything in them
(including binary data) and since we absolutely don't have to have them
there's just no reason to take on the risk.
* feature (auth/ldap): add AuthMethod.UseTokenGroups
* feature (auth/ldap): add Authenticate(...)
* refactor (auth/ldap): ensure options take a context as the 1st parameter
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): make fmt deltas
* feature (auth/ldap): add managed groups (#2760)
* tests (auth/ldap): add missing unit test to Repository.DeleteAccount(...)
Add bits to test the delete operation when you're not able to generate
oplog metadata
* feature (auth/ldap): add managed groups
fixup! feature (auth/ldap): add managed groups (#2760)
* feature (auth/ldap): service proto definition (#2761)
* feature (handlers/authmethods): add handlers for ldap auth method operations (#2794)
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): update cap/ldap to latest version
* feature (auth/ldap): add ldap api generation definitions
* feature (authmethods): add ldap repo NewService(...)
* feature (authmethods/ldap): add proper mask_mapping to protobufs
* feature (authmethods): add support to get an ldap auth method
* refactor (auth/ldap): export TestGenerateCA(...)
* feature (authmethods): add support to create an ldap auth method
* feature (authmethods): add support to delete an ldap auth method
* feature (authmethods): add support to list ldap auth methods
* refactor (auth/ldap): make urls optional for NewAuthMethod(...)
* refactor (auth/ldap): export ldap.TestInvalidPem
* chore: make fmt changes
* fix (auth/ldap): properly handle group search config
Add constraints and tests to ensure when an ldap AuthMethod.EnableGroups
is true, and UseTokenGroups is false; that there's a GroupDn configured
for finding a user's associated groups
* feature (authmethods): add support to update an ldap auth methods
* chore (db/ldap): tmp mv migrations so there's no conflict with ongoing work
* feature (verifier): add ldap auth method to verifier bits
* fix (controller): prevent panic when controller stops when there's no listener
* feature (authmethods): add support to authenticate via ldap auth methods
* chore (migrations): fix whitespace in stmt
* chore: fmt fixup
* tests (auth/ldap): invalid err msg
* feature (cli/authmethods): add support for ldap auth-methods CRUD and authenticate (#2810)
* feature (authmethods): add CLI support for ldap auth methods CRUD
* tests (api/auth): ldap auth method classification tests
* feature (authmethods): add CLI support for ldap auth authenticate
* feature (auth/ldap): set request timeouts for ldap server connections
* feature (handlers/authmethods): handle u_anon listing properly.
* feature (account/handers): ldap account and managed group CRUDL APIs (#2852)
* feature (auth/ldap) add repository Listing of ManagedGroupMemberAccount
* feature (controller/handlers): add ldapRepoFn to accounts service
* feature (auth/ldap) register ldap managed group subtype
* feature (account/handlers): ldap account CRUDL APIs
* feature (controller/handlers): add ldapRepo to managed groups service
* feature (account/handlers): ldap managed group CRUDL APIs
* docs (domain): add LDAP accounts, auth-methods and managed groups (#2857)
* feature (ldap/cli) add ldap accounts and managed groups CRUDL commands (#2856)
* fix (handlers/authmethods): fix ldap authorized actions (#2892)
* feature (cli/ldap/authenticate): use primary auth method if none is provided (#2890)
* fix (auth/ldap): support setting the state attribute
* feature (cli/ldap/authenticate): use primary auth method if none is provided
* feature (wh/ldap) add tests for new ldap auth method and accounts (#2919)
* refactor (migrations/ldap): mv to correct directory
* chore: add copyright headers
* fix (api/authmethods/ldap): renumber new LdapAuthMethodAttributes field
* fix (auth/ldap): allow the auth method state to be updated (#2951)
* chore: update sdk and api versions for llb - this is tmp until merging
* tests (managed groups): add required errContains for new test
The `boundary connect` subcommands attempt to parse the credentials to
use for brokering. This allows the subcommands to insert the credentials
automatically into the process called by the subcommand, i.e. `ssh` or
`psql`. There is some fallback logic to try a best attempt at parsing
the credential in cases where a credential type has not be set on the
credential source.
The bug was introduced with the recent change to the vault credential
library subtype being renamed from `vault` to `vault-generic`. This
fallback logic would only run if the credential source type was "vault"
or "static", so if the vault credential library was created without
specifying a credential-type, the credential would not be parsed and
automatically passed to the sub-process.
This fix removes the additional check on the credential source's type,
instead it will attempt to parse the credential, relying just on the
structure of the credential.
This also fixes a similar bug in the table output of secrets when using
`boundary connect` without a subcommand. The parsing of the credentials
for display in the table was only running for `vault` or `static`.
Blame: db42eafd7a
This commit replaces `os.MkdirTemp` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests [complete.
Prior to this commit, temporary directory created using `os.MkdirTemp`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* feat: default to using primary auth method with authenticating
* Add ability to specify scope ID flag in authenticate method
---------
Co-authored-by: Jeff Mitchell <jeffrey.mitchell@gmail.com>
* Fix target port handling
This fixes two issues that compounded on each other (see the Changelog
update for more information):
* The verification logic for hosts was not correct for update operations
(in multiple ways) which meant that a host could be updated after
creation to have a port. Targets had a previously fixed bug where they
did not require a default port, which meant that ports could be used
from hosts
* A recent (unreleased) change had prioritized any port coming from the
host over the default port, which would mean there was no way if a
host had a port specified to use it in multiple targets.
This fixes the update verification logic, and strikes a middle ground
between breaking things and not by allowing existing addresses with
ports to be used with targets but ignoring that port, instead requiring
targets to have default port set at authorize time (currently there is
backwards compat that does not require this due to the original optional
port bug).
* Update CHANGELOG.md
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Creates a target using an address for boundary dev and when first
init-ing boundary (boundary database init).
It also makes this newly created target the default one
(ttcp_1234567890). The target using host sources is now a secondary
target (ttcp_0987654321).
This commit adds CLI support for addresses to be attached directly to a
Target, for all current types of Target (ssh and tcp).
It also clarifies the relevant documentation regarding the autogen of
API option functionality.
Todd
irenarindos
Louis Ruch
Jim
Johan Brandhorst-Satzkorn
Jeff Mitchell
Haotian
Chris van Meer
Hugo Vieira
Timothy Messier
Eng Zer Jun
Irena Rindos
Jeff MalnickandJeff Mitchell