This increases the default rate limits to:
- 1,500 reqs / 30 seconds for list actions in total
- 1,500 reqs / 30 seconds for list actions per IP address
- 150 reqs / 30 seconds for list actions per auth token
And for all other actions:
- 30,000 reqs / 30 seconds for list actions in total
- 30,000 reqs / 30 seconds for list actions per IP address
- 3,000 reqs / 30 seconds for list actions per auth token
This seems to be a reasonable default for a small to medium size cluster
based on some scale testing.
(cherry picked from commit 237c8b6084f42655edaba49055e511163fdf1c53)
Previously this would truncate to the nearest integer, which could
result in clients retrying before the quota has reset, and getting rate
limited again. This also includes an update from go-rate that will round
up when reporting the reset time for the RateLimit header.
Note that in the case of a 503, the Retry-After header was already being
set correctly.
See: https://github.com/hashicorp/go-rate/pull/8
Boundary OIDC method does not currently support passing in prompts during authentication. This change adds the capability of passing OIDC prompts. Prompts are optional OIDC parameters that determine the behaviour of the authentication server: https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest
## Changes
- New `auth_oidc_prompt` table which contains all the prompts for OIDC auth method
- New `auth_oidc_prompt_enm` table which contains possible enum values for a prompt
- Currently supported:
- `none`:
The Authorization Server MUST NOT display any authentication or consent user interface pages
- `login`: The Authorization Server SHOULD prompt the End-User for reauthentication
- `consent`: The Authorization Server SHOULD prompt the End-User for consent before returning information to the Client
- `select_account`: The Authorization Server SHOULD prompt the End-User to select a user account
- `oidc_auth_method_with_value_obj` view has been updated to return `prompt` value
- Add `prompt` option for OIDC auth method CLI create and update
- Pass configured prompt during OIDC authentication
- Add `prompt` API validation for create and update
* Add generic read/update/delete commands
This adds three generic commands that use the resource prefix to
determine the subcommand to run and pass through args over to that
subcommand. Since this occurs very early on and to avoid loading
essentially every internal resource package, I moved subtype definitions
to globals.
This replaces #3967
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
* De-duplicate Subtype code (#4031)
Co-authored-by: Timothy Messier <tim.messier@gmail.com>
---------
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Co-authored-by: Timothy Messier <tim.messier@gmail.com>
* If passing a private key without specifying it in URL syntax, give a
proper error message (previously we were only making sure it was a
scheme we knew how to handle, but we need to also be more informative
if it's not a URL at all)
* If the handshake from the proxy fails, don't hang, just exit
* Update some error messages to use capitalization in line with our
standard CLI error format
The nhooyr/websocket library now has a release with the new default
behavior that removes the message size limit. This allows us to switch
off of the fork and back to the upstream.
In the same release that includes the fix we need for the boundary
client, the wspb helper package was removed from websocket. This package
contained some functions to read and write protobuf messages. However,
it was using the deprecated github.com/golang/protobuf/proto library. To
avoid this dependancy in the library they opted to just remove wspb.
Thus this provides a replacement implementation that uses
google.golang.org/protobuf/proto. Notably the newer proto library seems
to lack an equivalent of proto.NewBuffer so writes to the websocket and
not able to leverage a sync.Pool of byte.Buffers to reduce allocations.
Refs: 88bb253554
See: https://github.com/nhooyr/websocket/commit/ac385120c6e34fa6584f3856d5db949a21bbb65e
* Add generic read/update/delete commands
This adds three generic commands that use the resource prefix to
determine the subcommand to run and pass through args over to that
subcommand. Since this occurs very early on and to avoid loading
essentially every internal resource package, I moved subtype definitions
to globals.
* Update main.go
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
* Update changelog and remove another deprecated command
---------
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
In #2076 the refactor changed the position of a parenthesis, causing
the dev key to truncate the base64 representation instead of specifying
which bytes to base64 encode.
We don't need this slicing anymore anyways since we now do individual
key generation calls so just remove it.
In preparation for putting proxy code in the api package this creates some necessary fields in the target output and it pre-moves credential parsing and proxy handshake code to their new places. This will make the diff for the actual proxy code move quite a bit smaller.
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
With the KMS changes this should never have worked at all (because the
different databases means the credentials conveyed after the KMS-based
authentication would never be valid). However, it was sometimes passing
because of a race condition: the worker could be found in the database
before the new credentials were returned to the worker, causing the
worker to start at the KMS step with the second controller.
This changes the test to use the same database for two controllers, but
to only ever have one running at a time, and uses a sequence of two
changed (or unchanged, depending) status updates from the worker to
ensure that the reload was successful.
* fix (events): convert multierror to stdlib error
multierror errors will be converted to a stdlib error (because
multierror doesn't support json marshaling).
* refact (errors): convert from multierror to stdlib errors.Join(...)
* refact: convert from pkg/errors to stdlib error wrapping
The connectivity state changes for `upstream_connection_state` health field is causing the test to be flakey. Commenting out the field during assertions. `upstream_connection_state` health field is tested in other tests
The SetupSuiteTargetFilters globally mutates the function used for logic
inside the target handler service. This means that we could get
inconsistent logical behavior in certain tests that were run in parallel,
since the logic can change at runtime. Ensure tests that make use
of this function are never run in parallel with other tests.
* feat: Worker Connectivity Health Check
Add worker upstream connection state. API calls to the worker's ops `/heath?worker_info=1` endpoint should now return a new filed called `upstream_connection_state`
```
{
"worker_process_info":{
"state":"active",
"active_session_count":0,
"upstream_connection_state":"READY"
}
}
```
The states returned will be GRPC connection states: https://grpc.github.io/grpc/core/md_doc_connectivity-semantics-and-api.html
There could be multiple upstream addresses but GRPC manual resolver determines the state of the connection.
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at https://hashi.co/bsl-blog, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* Update copyright file headers to BUS-1.1
* Rerun make gen
This will pick up the last of the license changes
* Revert "Rerun make gen"
This reverts commit dbe0968bffd92745d8663c6940debae098395a6b.
* Remove copywrite from generation script
The current version of copywrite is not sophisticated enough
to only apply the copywrite changes to certain subdirectories,
so to avoid accidentally relicensing our api and sdk modules,
we will stop running the copywrite script until such time
that it can do the right thing.
* License protobuf API as MPL
The protobuf API files are used to generate the SDK,
since we want the SDK to be MPL, the protobuf files
must also be MPL. This extends to all protobuf files
whose sources end up in the SDK directory, including:
- internal/proto/controller/api
- internal/proto/controller/custom_options
- internal/proto/plugin
It also includes the generated service directory in
internal/gen/controller/api/services, since they are
generated from the protobuf sources used for the SDK.
* Change website license file name
This makes the naming scheme consistent with the rest
of the repository.
* Add note on licensing to README
* Set copywrite license to BUSL
* Revert "Add note on licensing to README"
This reverts commit 4d865a91a7a4f11605f0dc4609355d7e3c3cfffe.
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
When using an alias, we automatically add a little
blurb to the end of the flag help. When not terminating
the flag help with a full stop, this looks a bit odd. Add
full stops to all the download flags for consistency.
The auth-tokens help command included a reference to
a non-existent auth-tokens create command. Replace the
default help and also add a helpful pointer to the authenticate
command.
This avoids a situation where teardown results in an error due to the
worker not accepting the connection (since the credentials are invalid).
Teardown is a best-effort way to avoid sessions that have long lifetimes
ending up having to wait for expiration before cleanup, but if we're
near expiration it doesn't really matter.
Fixes ICU-9633
This allows specifying multiple IDs in grants via an `ids` field, which
will eventually become the normal way to specify IDs. Internally, each
grant with multiple IDs turns into multiple ACL grants each with a
single ID; to make this distinction clearer and allow for better
separation of concerns an AclGrant type has been introduced, so really
multiple IDs in a Grant turn into multiple AclGrants.
The nice thing about doing it this way is that it becomes purely a
parsing concern; no actual validation logic has changed.
For backwards compatibility with grants already stored in roles, we do
not error out if `id` is specified. However, eventually we will simply
not support grants with `id` coming via the API; they will fail API
validation, such that new grants will require the use of the updated
`ids` field.
A follow-on PR will plumb this through the service handlers/API/CLI, but
I decided to do it in separate chunks to make reviewing easier, given
that they are easily separable into the internal and external aspects of
the change.
* Add CLI/API checks around using ID in grants (#3264)
* Plumb through some contexts to remove a lot of deprecated errors (#3268)
Timothy Messier
Elim Tsiagbey
guangwu
Sorawis Nilparuk (Bo)
dani
Sepehr
Jim
Irena Rindos
Louis Ruch
hashicorp-copywrite[bot]andJohan Brandhorst-Satzkorn
Todd
irenarindos