This registers the ActionSets for each resource when the handler
packages are initialized. This then allows other packages to retrieve
the ActionSets for a given resource from the action package.
The initial consumer of this will be the ratelimit package so that it
can programmatically enumerate all of the valid combinations of a
resource and action.
This leaves a number of TODO to refactor the handler packages to also
retrieve the action sets from the registered actions instead of using a
package variable. This is left as a TODO since there is some
inconsistencies in how these package variables are used between the
handlers. For example a number of packages use a map of subtypes to
ActionSets which is then used withing the handler implementation. Others
use a map, but don't seem to use it at all. And others just use an
ActionSet.
This switches the implementation of an ActionSet from a slice to a map
to ensure the elements in an ActionSet are unique. This allows for other
packages to perform set operations such as a union or difference without
needing to account for duplicates.
* chore (managed groups): just a small rename to improve readability
* test (aut/ldap): add a test for user grants based on ldap grp
* tests (role grant): extend TestGrantsForUser(...) to cover ldap grps
* refact (iam.(Repository).GrantsForUser): more readable grantsQuery
Convert existing CTE to use sub-selects for readability
* subtypes,handlers: add runtime trace regions
The subtype.Filterable and handlers.ProtoToStruct functions
are costly and worth measuring whenever runtime tracing
is in use. This has almost no cost when tracing is not in use,
so there's little harm in having them in place.
* testing: Add TRACING.md
TRACING.md contains information about how to perform
Go runtime tracing of the Boundary application.
Boundary OIDC method does not currently support passing in prompts during authentication. This change adds the capability of passing OIDC prompts. Prompts are optional OIDC parameters that determine the behaviour of the authentication server: https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest
## Changes
- New `auth_oidc_prompt` table which contains all the prompts for OIDC auth method
- New `auth_oidc_prompt_enm` table which contains possible enum values for a prompt
- Currently supported:
- `none`:
The Authorization Server MUST NOT display any authentication or consent user interface pages
- `login`: The Authorization Server SHOULD prompt the End-User for reauthentication
- `consent`: The Authorization Server SHOULD prompt the End-User for consent before returning information to the Client
- `select_account`: The Authorization Server SHOULD prompt the End-User to select a user account
- `oidc_auth_method_with_value_obj` view has been updated to return `prompt` value
- Add `prompt` option for OIDC auth method CLI create and update
- Pass configured prompt during OIDC authentication
- Add `prompt` API validation for create and update
* Add generic read/update/delete commands
This adds three generic commands that use the resource prefix to
determine the subcommand to run and pass through args over to that
subcommand. Since this occurs very early on and to avoid loading
essentially every internal resource package, I moved subtype definitions
to globals.
This replaces #3967
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
* De-duplicate Subtype code (#4031)
Co-authored-by: Timothy Messier <tim.messier@gmail.com>
---------
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Co-authored-by: Timothy Messier <tim.messier@gmail.com>
* Add generic read/update/delete commands
This adds three generic commands that use the resource prefix to
determine the subcommand to run and pass through args over to that
subcommand. Since this occurs very early on and to avoid loading
essentially every internal resource package, I moved subtype definitions
to globals.
* Update main.go
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
* Update changelog and remove another deprecated command
---------
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
The Vault Credential Store only accepts Vault tokens that have a TTL
greater than the internal job scheduler's run frequency. This prevents a
Vault Credential Store from being created with a Vault token that will
expire before Boundary can renew it.
The Vault test server, by default, creates Vault tokens with a TTL equal
to the duration of time remaining until `t.Deadline()` is reached.
This change sets the test controller's default job scheduler duration to
be half of time remaining until `t.Deadline()`. The default job
scheduler duration can still be overridden by setting a duration on
`TestConrollerOpts.SchedulerRunJobInterval`.
This change fixes the error received when running:
go test -timeout 30s \
-tags devlicense \
-run '^TestList$' \
github.com/hashicorp/boundary/internal/tests/api/credentialstores
Which returned this error:
{"kind":"Internal",
"message":"credentialstores.(Service).createInRepo: unable to create
credential store: vault.(Repository).CreateCredentialStore: unknown,
unknown: error #0: scheduler interval must be greater than token
ttl. scheduler jobs interval value: 1m0s"}
The TestObject test helper previously returned an error,
but it's easier to have it perform the error check itself,
as it conventionally done with test helpers.
In preparation for putting proxy code in the api package this creates some necessary fields in the target output and it pre-moves credential parsing and proxy handshake code to their new places. This will make the diff for the actual proxy code move quite a bit smaller.
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
* chore: Fix comment typo
* test(e2e): Update to use new credential library type
* test(e2e): Update to use new field name
* test(bats): Remove tests that use deprecated subcommand
* chore: Update to 0.14.0
* test(credentiallibraries): Update to use new credential library type
* doc: Add deprecation notices for 0.14.0
* fixup! doc: Add deprecation notices for 0.14.0
With the KMS changes this should never have worked at all (because the
different databases means the credentials conveyed after the KMS-based
authentication would never be valid). However, it was sometimes passing
because of a race condition: the worker could be found in the database
before the new credentials were returned to the worker, causing the
worker to start at the KMS step with the second controller.
This changes the test to use the same database for two controllers, but
to only ever have one running at a time, and uses a sequence of two
changed (or unchanged, depending) status updates from the worker to
ensure that the reload was successful.
The existing pattern was subject to a bug whereby a lock
value was copied every time the value was passed around.
This was happening because of the use of an embedded
protobuf type. To avoid copying a mutex, use a pointer
type in the embedding.
Also fixes a few linter warnings complaining about the use
of unkeyed literals.
* fix (events): convert multierror to stdlib error
multierror errors will be converted to a stdlib error (because
multierror doesn't support json marshaling).
* refact (errors): convert from multierror to stdlib errors.Join(...)
* refact: convert from pkg/errors to stdlib error wrapping
The SetupSuiteTargetFilters globally mutates the function used for logic
inside the target handler service. This means that we could get
inconsistent logical behavior in certain tests that were run in parallel,
since the logic can change at runtime. Ensure tests that make use
of this function are never run in parallel with other tests.
* feat (auth/ldap): add Repo support for max page size and deref aliases (#3670)
* chore: update cap/ldap dependency
This latest version of cap/ldap adds support for MaxPageSize and
DerefAliases
* feat (auth/ldap): add MaxPageSize and DerefAliases to storage proto
* feat (api/authmethods): add new ldap fields.
Add support for maximum_page_size and dereference_aliases
* feat (auth/ldap): schema changes to support new LDAP attributes
* feat (auth/ldap): add Repo support for max page size and deref aliases
* feat (handlers/ldap): add support for new fields (#3674)
Added API support for new ldap fields: MaximumPageSize and
DereferenceAliases
* chore: add CHANGELOG entry for new api auth ldap fields
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at https://hashi.co/bsl-blog, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* Update copyright file headers to BUS-1.1
* Rerun make gen
This will pick up the last of the license changes
* Revert "Rerun make gen"
This reverts commit dbe0968bffd92745d8663c6940debae098395a6b.
* Remove copywrite from generation script
The current version of copywrite is not sophisticated enough
to only apply the copywrite changes to certain subdirectories,
so to avoid accidentally relicensing our api and sdk modules,
we will stop running the copywrite script until such time
that it can do the right thing.
* License protobuf API as MPL
The protobuf API files are used to generate the SDK,
since we want the SDK to be MPL, the protobuf files
must also be MPL. This extends to all protobuf files
whose sources end up in the SDK directory, including:
- internal/proto/controller/api
- internal/proto/controller/custom_options
- internal/proto/plugin
It also includes the generated service directory in
internal/gen/controller/api/services, since they are
generated from the protobuf sources used for the SDK.
* Change website license file name
This makes the naming scheme consistent with the rest
of the repository.
* Add note on licensing to README
* Set copywrite license to BUSL
* Revert "Add note on licensing to README"
This reverts commit 4d865a91a7a4f11605f0dc4609355d7e3c3cfffe.
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
Co-authored-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
This allows specifying multiple IDs in grants via an `ids` field, which
will eventually become the normal way to specify IDs. Internally, each
grant with multiple IDs turns into multiple ACL grants each with a
single ID; to make this distinction clearer and allow for better
separation of concerns an AclGrant type has been introduced, so really
multiple IDs in a Grant turn into multiple AclGrants.
The nice thing about doing it this way is that it becomes purely a
parsing concern; no actual validation logic has changed.
For backwards compatibility with grants already stored in roles, we do
not error out if `id` is specified. However, eventually we will simply
not support grants with `id` coming via the API; they will fail API
validation, such that new grants will require the use of the updated
`ids` field.
A follow-on PR will plumb this through the service handlers/API/CLI, but
I decided to do it in separate chunks to make reviewing easier, given
that they are easily separable into the internal and external aspects of
the change.
* Add CLI/API checks around using ID in grants (#3264)
* Plumb through some contexts to remove a lot of deprecated errors (#3268)
For requests to the target authorize session endpoint we support passing
a target name instead of an id. This means that `req.GetId()` might not
be the target's public id. Since the first thing authorize session does
includes retrieving the target as part of the authorization checks, this
subtype check can leverage the public id of the target instead of using
the request.
Fixes: 6178dd516e
Timothy Messier
Jim
Johan Brandhorst-Satzkorn
Elim Tsiagbey
Michael Gaffney
Sepehr
dani
Michael Li
Sepehr
Irena Rindos
hashicorp-copywrite[bot]andJohan Brandhorst-Satzkorn
Lars Lehtonen
Michael Milton
Louis Ruch
Todd