// Copyright (c) HashiCorp, Inc.
// SPDX-License-Identifier: BUSL-1.1

syntax = "proto3";

package ssh.v1;

// An UnknownRequest is an unrecognized SSH request. We'll record the type, want_reply, and payload
message UnknownRequest {
  // The request type field
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // The Payload field on the SSH request
  bytes data = 3;
}

// Fields for the following SSH request protos were taken from
// https://www.iana.org/assignments/ssh-parameters/ssh-parameters.xhtml#ssh-parameters-11

// A session is started by sending the following message.
message SessionRequest {
  // The request type field. This should always be "session"
  string request_type = 1;

  // The sender channel
  uint32 sender_channel = 2;

  // The initial window size
  uint32 initial_window_size = 3;

  // The maximum packet size
  uint32 maximum_packet_size = 4;
}

// X11 channels are opened with a channel open request.  The resulting
// channels are independent of the session, and closing the session
// channel does not close the forwarded X11 channels.
message X11Request {
  // The request type field. This should always be "x11"
  string request_type = 1;

  // The sender channel
  uint32 sender_channel = 2;

  // The initial window size
  uint32 initial_window_size = 3;

  // The maximum packet size
  uint32 maximum_packet_size = 4;

  // The originator address (e.g., "192.168.7.38")
  string originator_address = 5;

  // The originator port
  uint32 originator_port = 6;
}

// When a connection comes to a port for which remote forwarding has
// been requested, a channel is opened to forward the port to the other
// side.
message ForwardedTCPIPRequest {
  // The request type field. This should always be "forwarded-tcpip"
  string request_type = 1;

  // The sender channel
  uint32 sender_channel = 2;

  // The initial window size
  uint32 initial_window_size = 3;

  // The maximum packet size
  uint32 maximum_packet_size = 4;

  // The address that was connected
  string address = 5;

  // The port that was connected
  uint32 port = 6;

  // The originator ip address (e.g., "192.168.7.38")
  string originator_ip_address = 7;

  // The originator port
  uint32 originator_port = 8;
}

// When a connection comes to a locally forwarded TCP/IP port, the
// following packet is sent to the other side.
message DirectTCPIPRequest {
  // The request type field. This should always be "direct-tcpip"
  string request_type = 1;

  // The sender channel
  uint32 sender_channel = 2;

  // The initial window size
  uint32 initial_window_size = 3;

  // The maximum packet size
  uint32 maximum_packet_size = 4;

  // The host to connect
  string host = 5;

  // The port to connect
  uint32 port = 6;

  // The 'originator IP address' is the numeric IP address of the machine
  // from where the connection request originates
  string originator_ip_address = 7;

  // The port on the host from where the connection originated.
  uint32 originator_port = 8;
}

// Fields for the following SSH request protos were taken from
// https://www.iana.org/assignments/ssh-parameters/ssh-parameters.xhtml#ssh-parameters-13

// A pseudo-terminal can be allocated for the session by sending the
// following message.
message PtyRequest {
  // The request type field. This should always be "pty-req"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // TERM environment variable value (e.g., vt100)
  string term_env_var = 3;

  // Terminal width, characters (e.g., 80)
  uint32 terminal_width_characters = 4;

  // Terminal height, rows (e.g., 24)
  uint32 terminal_height_rows = 5;

  // Terminal width, pixels (e.g., 640)
  uint32 terminal_width_pixels = 6;

  // Terminal height, pixels (e.g., 480)
  uint32 terminal_height_pixels = 7;

  // Encoded terminal modes
  bytes encoded_terminal_mode = 8;
}

// X11 forwarding may be requested for a session using the following message
message X11ForwardingRequest {
  // The request type field. This should always be "x11-req"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // Single connection
  bool single_connection = 3;

  // X11 authentication protocol
  string x11_authentication_protocol = 4;

  // X11 authentication cookie
  string x11_authentication_cookie = 5;

  // X11 screen number
  uint32 x11_screen_number = 6;
}

// Environment variables may be passed to the shell/command to be
// started later.
message EnvRequest {
  // The request type field. This should always be "env"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // Variable name
  string variable_name = 3;

  // Variable value
  string variable_value = 4;
}

// This message will request that the user's default shell (typically
// defined in /etc/passwd in UNIX systems) be started at the other end.
message ShellRequest {
  // The request type field. This should always be "shell"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;
}

// This message will request that the server start the execution of the
// given command.  The 'command' string may contain a path.
message ExecRequest {
  // The request type field. This should always be "exec"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // The command to be executed
  string command = 3;
}

// Execute a predefined subsystem. It is expected that
// these will include a general file transfer mechanism, and possibly
// other features.
message SubsystemRequest {
  // The request type field. This should always be "subsystem"
  string request_type = 1;

  // The want_reply field on the SSH request
  bool want_reply = 2;

  // The predefined subsystem to execute
  string subsystem_name = 3;
}

// When the window (terminal) size changes on the client side, it MAY
// send a message to the other side to inform it of the new dimensions.
message WindowChangeRequest {
  // The request type field. This should always be "window-change"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Terminal width, columns
  uint32 terminal_width_columns = 3;

  // Terminal height, rows
  uint32 terminal_height_rows = 4;

  // Terminal width, pixels
  uint32 terminal_width_pixels = 5;

  // Terminal height, pixels
  uint32 terminal_height_pixels = 6;
}

// The message below is used by the server to inform the client when it
// can or cannot perform flow control (control-S/control-Q processing).
// If 'client can do' is TRUE, the client is allowed to do flow control
// using control-S and control-Q
message XonXoffRequest {
  // The request type field. This should always be "xon-xoff"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Client can do flow control
  bool client_can_do = 3;
}

// A signal can be delivered to the remote process/service using the
// following message.
message SignalRequest {
  // The request type field. This should always be "signal"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false
  bool want_reply = 2;

  // Signal name, without the SIG prefix. The 'signal name' is one of the following (these are from [POSIX]).
  //            ABRT   ALRM   FPE   HUP   ILL   INT   KILL
  //            PIPE   QUIT   SEGV  TERM  USR1  USR2
  string signal_name = 3;
}

//  When the command running at the other end terminates, the following
//   message can be sent to return the exit status of the command.
message ExitStatusRequest {
  // The request type field. This should always be "exit-status"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Exit status of the command
  uint32 exit_status = 3;
}

// The remote command may terminate violently due to a signal.
// Such a condition can be indicated by the following message.  A zero
// 'exit_status' usually means that the command terminated successfully.
message ExitSignalRequest {
  // The request type field. This should always be "exit-signal"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Signal name, without the SIG prefix. The 'signal name' is one of the following (these are from [POSIX]).
  //            ABRT   ALRM   FPE   HUP   ILL   INT   KILL
  //            PIPE   QUIT   SEGV  TERM  USR1  USR2
  string signal_name = 3;

  // Core dumped
  bool core_dumped = 4;

  // Error message in ISO-10646 UTF-8 encoding
  string error_message = 5;

  // Language tag from https://www.rfc-editor.org/rfc/rfc3066
  string language_tag = 6;
}

// The following channel-specific request can be sent over a session
// channel to request that the remote host perform
// a BREAK operation.
message BreakRequest {
  // The request type field. This should always be "break"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Break-length in milliseconds
  uint32 break_length_ms = 3;
}

// Fields for the following SSH request protos were taken from
// https://www.iana.org/assignments/ssh-parameters/ssh-parameters.xhtml#ssh-parameters-12

// A party need not explicitly request forwardings from its own end to
// the other direction.  However, if it wishes that connections to a
// port on the other side be forwarded to the local side, it must
// explicitly request this.
message TCPIPForwardRequest {
  // The request type field. This should always be "tcpip-forward"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Address to bind (e.g., "0.0.0.0") on which connections for forwarding
  // are to be accepted
  string address_to_bind = 3;

  // Port number to bind on which connections for forwarding
  // are to be accepted
  uint32 port_to_bind = 4;
}

// A port forwarding can be canceled with the following message.  Note
// that channel open requests may be received until a reply to this
// message is received.
message CancelTCPIPForwardRequest {
  // The request type field. This should always be "cancel-tcpip-forward"
  string request_type = 1;

  // The want_reply field on the SSH request. This should always be false.
  bool want_reply = 2;

  // Address to bind (e.g., "0.0.0.0") on which connections for forwarding
  // are to be accepted
  string address_to_bind = 3;

  // Port number to bind on which connections for forwarding
  // are to be accepted
  uint32 port_to_bind = 4;
}