threshold/website/content/docs/configuration/worker/index.mdx

---
layout: docs
page_title: Worker - Configuration
description: |-
  The worker stanza configures worker-specific parameters.
---

# `worker` Stanza
The `worker` stanza configures Boundary worker-specific parameters.

All workers within Boundary use certificates and encryption keys to identify
themselves and protect data in transit. However, there are multiple different
ways to register them so that registration of workers can fit into any workflow.
Registration methods are referred to as `pki` and `kms` registration methods and
the differences in how they are configured are in the sub-pages linked at the
bottom of this page.

Workers registered via the `pki` method ("PKI Workers") must be registered in
the system via an API call, and require storage on disk to store the current set
of credentials. Workers registering via the `kms` method ("KMS Workers")
auto-register after successful authentication, making them an easy mechanism to
use for automatic scaling, and meaning they are not required to store
credentials locally; each time they connect the KMS is used to reauthenticate
them.

~> Prior to version 0.13 of Boundary, workers had different properties and
capabilities depending on the registration method. If you are using pre-0.13
workers, with pre-0.13 upstreams please be sure to switch the documentation
version to `0.12.x` for correct information. If you are using 0.13 workers with
KMS-based authentication with pre-0.13 controllers, you _must_ set the
`use_deprecated_kms_auth_method` value in the worker configuration. See the KMS
page for more information.

## Common Worker Parameters
Regardless of registration mechanism, the following fields are supported.

```hcl
worker {
  public_addr = "5.1.23.198"

  # Mutually exclusive with hcp_boundary_cluster_id
  initial_upstreams = [
    "10.0.0.1",
    "10.0.0.2",
  ]

  tags {
    type   = ["prod", "webservers"]
    region = ["us-east-1"]
  }

  # HCP Boundary only
  # hcp_boundary_cluster_id = "....."
}
```

- `public_addr` - Specifies the public host or IP address (and optionally port)
  at which the worker can be reached _by clients for proxying_. This defaults to
  the address of the listener marked for `proxy` purpose. This is especially
  useful for cloud environments that do not bind a publicly accessible IP to a
  NIC on the host directly, such as an Amazon EIP.

  This value can reference any of the following:
  - a direct address string
  - a file on disk (file://) from which an address will be read
  - an env var (env://) from which the address will be read

- `initial_upstreams` - A list of hosts/IP addresses and optionally ports for
  reaching the boundary cluster. The port will default to `:9201` if not
  specified. This value can be a direct access string array with the addresses,
  or it can refer to a file on disk (`file://`) from which the addresses will be
  read, or an env var (`env://`) from which the addresses will be read. When
  using env or file, their contents must formatted as a JSON array:
  `["127.0.0.1", "192.168.0.1", "10.0.0.1"]`

- `tags` - A map of key-value pairs where values are an array of strings. Most
  commonly used for [filtering](/boundary/docs/concepts/filtering) targets a
  worker can proxy via [worker
  tags](/boundary/docs/concepts/filtering/worker-tags). On `SIGHUP`, the tags
  set here will be re-parsed and new values used. It can also be a string
  referring to a file on disk (`file://`) or an env var (`env://`).

- `hcp_boundary_cluster_id` - A string that can be used to configure PKI workers
  to connect to your HCP Boundary cluster rather than specifying
  `initial_upstreams`. This is currently only valid for workers using the PKI
  registration method and for workers directly connected to HCP Boundary.

## Signals
The `SIGHUP` signal causes a worker to reload its configuration file to pick up any updates for the `initial_upstreams` and `tags` values.
Any other updated values are ignored.

The `SIGTERM` and `SIGINT` signals initiate a graceful shutdown on a worker. The worker waits for any sessions to drain
before shutting down. Workers in a graceful shutdown state do not receive any new work, including session proxying, from the control plane.

## Multi-hop worker capabilities <sup>HCP only</sup>
Multi-hop capabilities, including multi-hop sessions and Vault private access,
is when a session or Vault credential request goes through more than one worker.
To enable this, two or more workers must be connected to each other in some
configuration. There are no limits on the amount of workers allowed in a
multi-hop session configuration.

It helps to think of “upstream” and “downstream” nodes in the context of
multi-hope. If you view controllers as the “top” node of a multi-hop chain, any
worker connected to a node is a "downstream" of that node; the node that any
particular worker connects to (whether another worker or a controller) is the
"upstream" of that node. For example, in the diagram below, Worker 2’s upstream
is Worker 1, and its downstream is Worker 3.

![multi-hop workers](/img/multi-hop-workers.png)

You can deploy multi-hop workers in scenarios where inbound network traffic is
not allowed. A worker in a private network can send outbound communication to
its upstream worker, and create a reverse proxy to establish a session.

You can configure [target worker filters][] with multi-hop workers to allow for
fine-grained control on which workers handle ingress and egress for session
traffic to a [target][]. Ingress worker filters determine which workers you
connect with to initiate a session, and egress worker filters determine which
workers are used to access targets.

### Multi-hop worker requirements

When you configure multi-hop sessions, there is an "ingress" worker, an "egress"
worker, and any number of intermediary workers. Ingress, egress, and
intermediary workers have the following requirements.

#### Ingress worker requirements

To proxy target connections, ingress workers require outbound access to the
Boundary control plane and inbound access from clients.

#### Intermediary worker requirements

Intermediary workers require outbound access to an upstream worker. The upstream
worker may be an ingress worker or another intermediary worker. Intermediary
workers also require inbound access from a downstream worker. The downstream
worker may be an egress worker or another intermediary worker.

#### Egress worker requirements

To proxy target connections, egress workers require outbound access to an
upstream worker and outbound access to the destination host or service.

## Complete configuration example

```hcl
listener "tcp" {
	purpose = "proxy"
	tls_disable = true
	address = "127.0.0.1"
}

worker {
  # Path for worker storage, assuming PKI registration. Must be unique across workers
  auth_storage_path="/boundary/demo-worker-1"

  # Workers typically need to reach upstreams on :9201
  initial_upstreams = [
    "10.0.0.1",
    "10.0.0.2",
    "10.0.0.3",
  ]

  public_addr = "myhost.mycompany.com"

  tags {
    type   = ["prod", "webservers"]
    region = ["us-east-1"]
  }
}

# The following KMS config is an example only
# Use a production KMS such as AWS KMS for production installs
kms "aead" {
  purpose = "worker-auth-storage"
	aead_type = "aes-gcm"
	key = "X+IJMVT6OnsrIR6G/9OTcJSX+lM9FSPN"
	key_id = "worker-auth-storage"
}


```

## Tutorials

Refer to the [Self-Managed Worker Registration with HCP Boundary](/boundary/tutorials/hcp-administration/hcp-manage-workers) tutorial to learn how to register and manage PKI workers.

Refer to the [Manage Multi-Hop Sessions with HCP Boundary](/boundary/tutorials/hcp-administration/hcp-manage-multi-hop) tutorial to learn how to configure a multi-hop session.

[kms workers]: /boundary/docs/configuration/worker/kms-worker
[pki workers]: /boundary/docs/configuration/worker/pki-worker
[target]: /boundary/docs/concepts/domain-model/targets
[target worker filters]: /boundary/docs/concepts/filtering/worker-tags#target-worker-filtering