hpr_generator/utils/mysql2sqlite

#!/usr/bin/awk -f

# Authors: @esperlu, @artemyk, @gkuenning, @dumblob

# FIXME detect empty input file and issue a warning

function printerr( s ){ print s | "cat >&2" }

BEGIN {
  if( ARGC != 2 ){
    printerr( \
      "USAGE:\n"\
      "       mysql2sqlite dump_mysql.sql > dump_sqlite3.sql\n" \
      "       OR\n" \
      "       mysql2sqlite dump_mysql.sql | sqlite3 sqlite.db\n" \
      "\n" \
      "NOTES:\n" \
      "       Dash in filename is not supported, because dash (-) means stdin." )
    no_END = 1
    exit 1
  }

  # Find INT_MAX supported by both this AWK (usually an ISO C signed int)
  #   and SQlite.
  # On non-8bit-based architectures, the additional bits are safely ignored.

  # 8bit (lower precision should not exist)
  s="127"
  # "63" + 0 avoids potential parser misbehavior
  if( (s + 0) "" == s ){ INT_MAX_HALF = "63" + 0 }
  # 16bit
  s="32767"
  if( (s + 0) "" == s ){ INT_MAX_HALF = "16383" + 0 }
  # 32bit
  s="2147483647"
  if( (s + 0) "" == s ){ INT_MAX_HALF = "1073741823" + 0 }
  # 64bit (as INTEGER in SQlite3)
  s="9223372036854775807"
  if( (s + 0) "" == s ){ INT_MAX_HALF = "4611686018427387904" + 0 }
#  # 128bit
#  s="170141183460469231731687303715884105728"
#  if( (s + 0) "" == s ){ INT_MAX_HALF = "85070591730234615865843651857942052864" + 0 }
#  # 256bit
#  s="57896044618658097711785492504343953926634992332820282019728792003956564819968"
#  if( (s + 0) "" == s ){ INT_MAX_HALF = "28948022309329048855892746252171976963317496166410141009864396001978282409984" + 0 }
#  # 512bit
#  s="6703903964971298549787012499102923063739682910296196688861780721860882015036773488400937149083451713845015929093243025426876941405973284973216824503042048"
#  if( (s + 0) "" == s ){ INT_MAX_HALF = "3351951982485649274893506249551461531869841455148098344430890360930441007518386744200468574541725856922507964546621512713438470702986642486608412251521024" + 0 }
#  # 1024bit
#  s="89884656743115795386465259539451236680898848947115328636715040578866337902750481566354238661203768010560056939935696678829394884407208311246423715319737062188883946712432742638151109800623047059726541476042502884419075341171231440736956555270413618581675255342293149119973622969239858152417678164812112068608"
#  if( (s + 0) "" == s ){ INT_MAX_HALF = "44942328371557897693232629769725618340449424473557664318357520289433168951375240783177119330601884005280028469967848339414697442203604155623211857659868531094441973356216371319075554900311523529863270738021251442209537670585615720368478277635206809290837627671146574559986811484619929076208839082406056034304" + 0 }
#  # higher precision probably not needed

  FS=",$"
  print "PRAGMA synchronous = OFF;"
  print "PRAGMA journal_mode = MEMORY;"
  print "BEGIN TRANSACTION;"
}

# historically 3 spaces separate non-argument local variables
function bit_to_int( str_bit,   powtwo, i, res, bit, overflow ){
  powtwo = 1
  overflow = 0
  # 011101 = 1*2^0 + 0*2^1 + 1*2^2 ...
  for( i = length( str_bit ); i > 0; --i ){
    bit = substr( str_bit, i, 1 )
    if( overflow || ( bit == 1 && res > INT_MAX_HALF ) ){
      printerr( \
        NR ": WARN Bit field overflow, number truncated (LSBs saved, MSBs ignored)." )
      break
    }
    res = res + bit * powtwo
    # no warning here as it might be the last iteration
    if( powtwo > INT_MAX_HALF ){ overflow = 1; continue }
    powtwo = powtwo * 2
  }
  return res
}

# CREATE TRIGGER statements have funny commenting. Remember we are in trigger.
/^\/\*.*(CREATE.*TRIGGER|create.*trigger)/ {
  gsub( /^.*(TRIGGER|trigger)/, "CREATE TRIGGER" )
  print
  inTrigger = 1
  next
}
# The end of CREATE TRIGGER has a stray comment terminator
/(END|end) \*\/;;/ { gsub( /\*\//, "" ); print; inTrigger = 0; next }
# The rest of triggers just get passed through
inTrigger != 0 { print; next }

# CREATE VIEW looks like a TABLE in comments
/^\/\*.*(CREATE.*TABLE|create.*table)/ {
  inView = 1
  next
}
# end of CREATE VIEW
/^(\).*(ENGINE|engine).*\*\/;)/ {
  inView = 0
  next
}
# content of CREATE VIEW
inView != 0 { next }

# skip comments
/^\/\*/ { next }

# skip PARTITION statements
/^ *[(]?(PARTITION|partition) +[^ ]+/ { next }

# print all INSERT lines
( /^ *\(/ && /\) *[,;] *$/ ) || /^(INSERT|insert|REPLACE|replace)/ {
  prev = ""

  # first replace \\ by \_ that mysqldump never generates to deal with
  # sequnces like \\n that should be translated into \n, not \<LF>.
  # After we convert all escapes we replace \_ by backslashes.
  gsub( /\\\\/, "\\_" )

  # single quotes are escaped by another single quote
  gsub( /\\'/, "''" )
  gsub( /\\n/, "\n" )
  gsub( /\\r/, "\r" )
  gsub( /\\"/, "\"" )
  gsub( /\\\032/, "\032" )  # substitute char

  gsub( /\\_/, "\\" )

  # sqlite3 is limited to 16 significant digits of precision
  while( match( $0, /0x[0-9a-fA-F]{17}/ ) ){
    hexIssue = 1
    sub( /0x[0-9a-fA-F]+/, substr( $0, RSTART, RLENGTH-1 ), $0 )
  }
  if( hexIssue ){
    printerr( \
      NR ": WARN Hex number trimmed (length longer than 16 chars)." )
    hexIssue = 0
  }
  print
  next
}

# CREATE DATABASE is not supported
/^(CREATE DATABASE|create database)/ { next }

# print the CREATE line as is and capture the table name
/^(CREATE|create)/ {
  if( $0 ~ /IF NOT EXISTS|if not exists/ || $0 ~ /TEMPORARY|temporary/ ){
    caseIssue = 1
    printerr( \
      NR ": WARN Potential case sensitivity issues with table/column naming\n" \
      "          (see INFO at the end)." )
  }
  if( match( $0, /`[^`]+/ ) ){
    tableName = substr( $0, RSTART+1, RLENGTH-1 )
  }
  aInc = 0
  prev = ""
  firstInTable = 1
  print
  next
}

# Replace `FULLTEXT KEY` (probably other `XXXXX KEY`)
/^  (FULLTEXT KEY|fulltext key)/ { gsub( /[A-Za-z ]+(KEY|key)/, "  KEY" ) }

# Get rid of field lengths in KEY lines
/ (PRIMARY |primary )?(KEY|key)/ { gsub( /\([0-9]+\)/, "" ) }

aInc == 1 && /PRIMARY KEY|primary key/ { next }

# Replace COLLATE xxx_xxxx_xx statements with COLLATE BINARY
/ (COLLATE|collate) [a-z0-9_]*/ { gsub( /(COLLATE|collate) [a-z0-9_]*/, "COLLATE BINARY" ) }

# Print all fields definition lines except the `KEY` lines.
/^  / && !/^(  (KEY|key)|\);)/ {
  if( match( $0, /[^"`]AUTO_INCREMENT|auto_increment[^"`]/) ){
    aInc = 1
    gsub( /AUTO_INCREMENT|auto_increment/, "PRIMARY KEY AUTOINCREMENT" )
  }
  gsub( /(UNIQUE KEY|unique key) (`.*`|".*") /, "UNIQUE " )
  gsub( /(CHARACTER SET|character set) [^ ]+[ ,]/, "" )
  # FIXME
  #   CREATE TRIGGER [UpdateLastTime]
  #   AFTER UPDATE
  #   ON Package
  #   FOR EACH ROW
  #   BEGIN
  #   UPDATE Package SET LastUpdate = CURRENT_TIMESTAMP WHERE ActionId = old.ActionId;
  #   END
  gsub( /(ON|on) (UPDATE|update) (CURRENT_TIMESTAMP|current_timestamp)(\(\))?/, "" )
  gsub( /(DEFAULT|default) (CURRENT_TIMESTAMP|current_timestamp)(\(\))?/, "DEFAULT current_timestamp")
  gsub( /(COLLATE|collate) [^ ]+ /, "" )
  gsub( /(ENUM|enum)[^)]+\)/, "text " )
  gsub( /(SET|set)\([^)]+\)/, "text " )
  gsub( /UNSIGNED|unsigned/, "" )
  gsub( /_utf8mb3/, "" )
  gsub( /` [^ ]*(INT|int|BIT|bit)[^ ]*/, "` integer" )
  gsub( /" [^ ]*(INT|int|BIT|bit)[^ ]*/, "\" integer" )
  ere_bit_field = "[bB]'[10]+'"
  if( match($0, ere_bit_field) ){
    sub( ere_bit_field, bit_to_int( substr( $0, RSTART +2, RLENGTH -2 -1 ) ) )
  }

  # remove USING BTREE and other suffixes for USING, for example: "UNIQUE KEY
  # `hostname_domain` (`hostname`,`domain`) USING BTREE,"
  gsub( / USING [^, ]+/, "" )

  # field comments are not supported
  gsub( / (COMMENT|comment).+$/, "" )
  # Get commas off end of line
  gsub( /,.?$/, "" )
  if( prev ){
    if( firstInTable ){
      print prev
      firstInTable = 0
    }
    else {
      print "," prev
    }
  }
  else {
    # FIXME check if this is correct in all cases
    if( match( $1,
        /(CONSTRAINT|constraint) ["].*["] (FOREIGN KEY|foreign key)/ ) ){
      print ","
    }
  }
  prev = $1
}

/ ENGINE| engine/ {
  if( prev ){
    if( firstInTable ){
      print prev
      firstInTable = 0
    }
    else {
      print "," prev
    }
  }
  prev=""
  print ");"
  next
}
# `KEY` lines are extracted from the `CREATE` block and stored in array for later print
# in a separate `CREATE KEY` command. The index name is prefixed by the table name to
# avoid a sqlite error for duplicate index name.
/^(  (KEY|key)|\);)/ {
  if( prev ){
    if( firstInTable ){
      print prev
      firstInTable = 0
    }
    else {
      print "," prev
    }
  }
  prev = ""
  if( $0 == ");" ){
    print
  }
  else {
    if( match( $0, /`[^`]+/ ) ){
      indexName = substr( $0, RSTART+1, RLENGTH-1 )
    }
    if( match( $0, /\([^()]+/ ) ){
      indexKey = substr( $0, RSTART+1, RLENGTH-1 )
    }
    # idx_ prefix to avoid name clashes (they really happen!)
    key[tableName] = key[tableName] "CREATE INDEX \"idx_" \
       tableName "_" indexName "\" ON \"" tableName "\" (" indexKey ");\n"
  }
}

END {
  if( no_END ){ exit 1}
  # print all KEY creation lines.
  for( table in key ){ printf key[table] }

  print "END TRANSACTION;"

  if( caseIssue ){
    printerr( \
      "INFO Pure sqlite identifiers are case insensitive (even if quoted\n" \
      "     or if ASCII) and doesnt cross-check TABLE and TEMPORARY TABLE\n" \
      "     identifiers. Thus expect errors like \"table T has no column named F\".")
  }
}