lee/hpr-knowledge-base
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit: HPR Knowledge Base MCP Server

Browse Source 
- MCP server with stdio transport for local use
- Search episodes, transcripts, hosts, and series
- 4,511 episodes with metadata and transcripts
- Data loader with in-memory JSON storage

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-Authored-By: Claude <noreply@anthropic.com>
This commit is contained in:
Lee Hanken
2025-10-26 10:54:13 +00:00
commit 7c8efd2228
4494 changed files with 1705541 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

867
hpr_transcripts/hpr0793.txt Normal file
View File

@@ -0,0 +1,867 @@
Episode: 793
Title: HPR0793: Server/Client relationship, DHCP server
Source: https://hub.hackerpublicradio.org/ccdn.php?filename=/eps/hpr0793/hpr0793.mp3
Transcribed: 2025-10-08 02:40:41
---
This is Hacker Public Radio, my name is Klaatu, and this is the Networking Basics mini-series
part 6.
You were probably thinking what Networking Basics mini-series, well, if you look back
about 400 episodes or so ago, there was a Networking Basics part 5, and that was an
episode that I was talking about, particularly the Internet Protocol IP, as detailed
in RFC791, talked a little bit about the Protocol, Fort Assignments, and stuff like that.
And that was a follow-up on four previous parts of that series in which we spoke about
all manners of Networking Protocols, Networking Conventions, the way that packets are constructed
and various things like that.
So if you haven't heard that in any of those episodes in that series yet, and you need
a primer on Networking Theory, Basic Networking Theory, then that might be something that you
want to look at, or better yet, listen to.
So in this series, we're going to talk about, or in this episode, and for the next couple
of episodes, we're going to talk about setting up a server.
And I'll tell you why that was a completely vague statement in a moment, but I'm going
to first give you a little bit of a preamble as to why I think it's important to talk
about setting up servers.
And this is not something that has not been covered, if you pardon the double negative,
before.
Right?
How to set up a server?
That's a topic that other podcasts have covered.
The one that comes to my mind most immediately is Linux Basement, Chad Wallenberg, the
fine Chad Wallenberg, spoke about setting up a server for the entire season of like,
I think it was his season two or three.
So that was a really great series, and he was doing it on Ubuntu, and it was working
really well for him, and the series was really good.
Now, I don't know about you, but me.
I wasn't even anywhere near setting up a server at that time when he was doing that.
So I listened and I learned, but not as much as I probably could have if I'd been a little
bit farther along.
Of course, I could go back and listen to it now.
But then again, it never really hurts to hear this sort of thing more than once in different
kinds of delivery styles.
So I encourage you to go back and listen to other podcasts that have covered this topic.
And I'm going to be covering it.
I'm going to try to keep it as generic as possible, but when it comes down to it, my experience
has been on Fedora and Red Hat in terms of the server stuff.
And that's just where I've gotten the experience.
So I'll be covering it from that angle, and I'll be covering it in a way that helped
me understand it.
And if you're learning styles similar to mine, maybe you'll find this one, this particular
take on the topic informative.
Servers are so ubiquitous at this point that if you're a geek, you really owe it to yourself
and to the people around you who rely on your geekiness for their everyday lives and
support to really understand how servers work.
If you've never set one up, then you're really just dealing with a bunch of theory.
And you're almost in a way, you're kind of dealing with a black box because you've never
been inside there.
You've never set it up.
You've never seen the causes for failure, the causes for confusion.
You don't really understand what's going on on the inside.
So getting experience with a server, while it isn't necessarily a must-have, it really
does help, especially if you go around talking about computers all the time because people
are inevitably going to ask you where their internet's went, and if you don't even understand
how the internet's on to someone's computer from the magical cloud outside, then you're
not going to be all that much help, aside from calling Comcast and asking for support
and at least knowing how to find the network manager when they tell you to open up the network
manager or whatever.
So that's why you should know about servers.
This many series hopes to understand servers a little bit better, and in order to do that,
I think that we need to introduce the server client concept because after a while you
start to take this for granted, but you have to understand how few people actually understand
this.
So the term, quote unquote, server, it's a very accurate term actually.
It's really, it's really well said server.
That makes a lot of sense, but unfortunately it gets confused a lot because a lot of different
things come to mind when we hear that word.
So we think of these big scary data centers, these big loud jet engine loud for unit
rack computers without any screens.
That's what we think of when we say, oh, that's a server.
And when people say, oh, I work with servers and I'm going to do a set up a server now.
That's what we think of.
We think of these mysterious machines without any screen.
You don't even know how to get in there.
They don't even have a keyboard hooked up to them.
What's going on?
Well, this can all be very, very simplified.
A server is any computer.
It can be a laptop.
It can be a little, a little electric board with a little process on it, you know, no
side, no larger than the size of a gum stick, you know, I mean, these, it can be a desktop
computer.
It can be a four rack unit beast of a computer, it's a computer from which you or someone
gets information.
Even more specifically, we could say a service, but what is a service?
So if you're getting information from a computer that you're not sitting in front of, you're
connecting to a different computer to get that information off of it and delivered onto
your screen, then that is that computer that you're connecting to as a server.
So what kind of computer are you there for running?
Well, you're running a client.
So the two terms here are server and client and then local and remote.
That's another thing that you hear oftentimes.
So the server is the remote computer that you are accessing and requesting information
from the local computers on that you're sitting at, typing on, and it's the client's
computer because it's requesting information.
Now very, very interestingly, a client's computer could also be a server to someone else.
So just because you're on a, quote, unquote, client machine doesn't mean you're not serving
someone else something.
So in fact, if you followed along with my HPR episode a long time ago on SSH and X forwarding
I think and DNS, dynamic DNS stuff like that, if you followed along with that episode
and learned how to SSH into a computer from that episode, then guess what, you have already
set up a server amazingly enough, yes, you have.
The minute you started the SSH D, well, the SSH Damon, the SSH D service, that computer
became an SSH server.
And when you went out to the cafe or you went to work and an SSH back home, then you were
using an SSH client.
So you see, you're not really as new to this as you might have thought.
And that's, I think, one of the confusing things about servers, we often think that a server
has to be one certain thing, doing a certain task.
And in reality, there's all kinds of different servers.
Now, sure, they may all be existing on the same computer, the same box, or it could be
a whole bunch of boxes around the data center or your apartment or your workplace, whatever.
Yeah, a server can serve many, many different things.
You've probably heard of DHCP servers.
You've probably heard of DNS servers, web servers.
Obviously, like I said, SSH servers, music playing servers, you know, like a music playing
Damon in PD, it could be serving streaming media.
It could be doing all of these things and more.
Go for sites, even, FTP, there's just so much out there that you can serve.
You can connect to these computers and access the different processes and kind of the different.
I don't really know if it's an application per se, but it's like an sort of infrastructure
that it provides you.
Okay, so what you need to get started setting up your own server, well, like I say, if you've
already set up an SSH capable machine, then actually you've already set up a server.
And the idea is pretty much the same.
If you're going to play around with setting up a server, all you need is like, well, really
two computers, maybe three, sometimes three would be better.
But at least two, one is going to be the server computer and one is going to be the client
or two could be the clients because it's kind of cool.
If you have three, then you can see how the client talks to the server and then you can
also see how the client talks to the other client because that's always interesting to see
as well.
In theory, I imagine you could do a lot of this with a number of virtual machines, like
if you've got a really nice beefy computer, lots of power behind it, you could just install
like, I don't know, KVM and libvert or virtual box or whatever.
And then just virtualize, you know, establish basically two or three virtual machines and
they could be pretty lightweight virtual machines too.
I mean, really, you could just install like a bare minimum install of like Fedora or Debian
or Slackware or whatever.
No X isn't really required actually in any of the cases.
And then you could, that virtual environment will have its own little subnetwork inside
of your bigger computer so you could make that sort of your virtualized test ground.
Personally, I mean, first of all, and I don't know, I haven't done enough virtualization
to really know how many network cards you can just create.
I mean, I imagine you can do that pretty easily within most of the virtual machine clients,
but I haven't really done it.
And personally, I don't know if I would do it that way simply because I think, I know
myself, I think I would get confused as to which virtual machine was which and all that
sort of thing.
And I don't think, I do a lot better sometimes with hardware, you know, if I'm pulling
a cable out of a box, then I know I've just pulled that cable out of the box.
If I'm just typing in some numbers and resetting things in a virtual machine, I don't think
it would impact me quite the same way, but maybe you're different.
So if you just absolutely don't have a lot of hardware, but you have one that you think
would be capable of a lot of virtual hardwares, then hey, go for it.
The required specs for a server vary depending on what kind of server you're intending to set
up, and also what you're expected usage is.
So if all you want to set up, for instance, is like a simple music streaming server so
that you can play music around your apartment remotely and just have that box kind of managing
all your music all day, then you could do that.
And you could use that maybe as an IRSSI machine, a little server for a screen session with
IRSSI in it so you can always be logged into IRC, that sort of thing.
I mentioned this as an example because that's what I do.
I've got a little Apple G4, it's like 400 megahertz, and it has like half a gig of RAM
in it, and it does that sort of thing perfectly well.
It serves me files, it serves me music, and serves screen inside of which I am running
IRSSI so that I can be always connected to IRC, and then I can SSH into that box when
I'm out at a cafe or something, I can reattach to screen and talk to people online as if
though I was sitting right there in the room.
So that's a pretty simple server.
Simple to set up, you don't really need anything special for that.
Now the minute you start trying to get three, four, and five, and 20 people onto a box
sharing complex services, you may or may not need something a little bit more powerful.
Once again, I've actually used like a G4, I think it was a little bit faster, it was
like one gig of Hertz maybe, but it's a little file sharing server, a Samba file share in
a classroom at my job, and it does great, and there's about 16 people using it concurrently,
and it does fine, and it's just that little local file server.
On the other hand, put that G4, same G4 specs in a room where three people are going to
use it, running a web server and Drupal and CVCRM, and all these other things that you
can kind of build on top of Apache and stuff, suddenly the thing just slows to a crawl.
So you really kind of have to know who is using the server and what they need it for,
and you have to somehow magically have an idea, some notion of what exactly kind of demand
that is going to put on your computer on the server.
And I don't know of any way to really know what that is without just trying it, just setting
it up, having people use it, and when they start complaining that the thing is horrible
and slow, then you know it was a bad idea to try that particular old box and you need
to upgrade.
So yeah, it really depends, you can go any way there, and like I say, there's a lot of
different kinds of servers, and you can have one box that runs lots of different services.
So if you know that you need a gateway machine that is going to serve DHCP and DNS information
and maybe some file sharing, you know, it's going to, you're going to want a fairly powerful
box then.
Okay, so enough about what a server is, I think people have all got an idea.
So in this episode we're going to set up a gateway machine, and a gateway machine is
not a brand of computer, it is a computer that brings the internet into itself, it ingests
the internet, and then it distributes that internet signal back out to its clients.
It sounds an awful like a router, doesn't it?
Well, interestingly enough, that's basically what we're setting up, so we'll do that first
and the way to do that initially would be to, like I say, find a box.
This box needs to have two network cards.
That is not to say that every server that you're going to build will have to have two network
cards.
It's just that if you want a server to sit between your clients and the worldwide web,
you do need two network cards because what we're going to do is assign an IP address to
one network card for the server to have, and then we're going to send out other addresses
of that other network card, so you need two physical network cards for this particular
setup.
But hey, if you're not interested or if you don't have the hardware to make a gateway
machine, no worries, we can still do cool things with that spare box that you have lying
around, but you'll just have to skip the gateway part, but that's fine.
So assuming that you do or assuming that you're interested in how it is done, you would
want to first install Linux on that machine.
That's kind of a no-brainer.
You could do BSD as well.
It's just whatever.
Some free distribution of a Unix or Unix alike operating system is a really good idea.
Just because it's a server does not mean it must not have a graphical environment.
If you feel like a graphical environment might be a nice fallback for you if you're not
used to a bunch of terminal work, then go for it.
Lots of people, more people than I kind of had imagined before I got a job sort of doing
server kinds of stuff, more people than I realized actually do run the graphical environment.
Even if it's not something that they have a monitor attached to their server for, they
still have the X-11 environment set up so that they can then do X forwarding into that
box.
If that makes you feel better or if it's just a good fallback kind of things, because
you're not sure if you're going to be able to get through all the terminal stuff, then
that's fine.
You can do that.
It doesn't really matter.
But at the same time, it could be a really, really lightweight install.
It doesn't have to be anything fancy, so don't feel like you have to install the full
GNOME desktop or anything like that.
It could be really lightweight.
And remember that running a desktop, even though you're not seeing it, it is using up system
resources, so keep that in mind if you're trying to maximize the power of your server.
Another thing that people tend to, like if you're looking at Linux distributions and trying
to figure out which one should I go with, I would say off the top, my head go with the
one that you know, but if you don't want to do that, then if this is a server that you
intend and it might not be right now.
But in the future, when you're looking at actually setting up a server that is going
to hopefully have staying power, then you want to keep in mind that the long-term support
stuff actually starts to matter when you're dealing with servers.
On your desktop, you might update and upgrade your distribution to the latest six month
release cycle every, well, six months, or possibly even earlier than that if you just
love to run alphas and betas.
But on the server, you don't want to go through that trouble, believe me.
There's too much stuff that you're configuring on the system level to make it really super
simple to just back up and reinstall.
I mean, obviously you can, but I mean, it's a little bit more complex than just dragging
your slash home directory, a slash home slash your username directory over to our drive
and then dragging it back on after you reinstall because there's a whole bunch of config
vials and stuff that you're going to be messing around with.
So the long-term support thing is good.
Of course, the security updates are really important.
To that end, Slackware, of course, is a really great thing for a server because it's got
like non-stop security updates, I think, since version eight, I mean, they're still updating
this stuff for Slackware eight for security.
So I mean, that's some serious support there.
Red Hat is the other big industry standard one, of course, or it is the industry standard
one.
It is, happens to be the one that I use, you can get an academic license if you're looking
to get into the IT world and get a natural job doing this sort of thing.
You feel like you really want to know those checks in the block.
You want to be able to say, yes, I know Red Hat, yes, I've used them, yes, I've had
to support a contract with them before.
You can get an academic license, I'm not sure, I imagine you need to be a student somewhere,
but if you go back and listen to my episode on fake IDs, you might be able to come up
with a way to make that happen.
If you don't want to do the whole supported Red Hat thing where you can actually call them
on the phone, well, actually, I think the academic doesn't let you call anyway.
You can get web support from Red Hat.
But if you don't want to do that and you feel like you can muddle your way through this
without spending 60 bucks on the academic license, which is probably true, then you could
go, of course, the Sintos route, a scientific Linux as well, I've been using the scientific
Linux repository on one of my workstations and it's pretty, pretty good.
So you know, you've got those Red Hat clones and then honestly, the Fedora stuff is really
good too.
I mean, I love Fedora anyway, and I felt a little bit weird about running it on a server
and I still feel a little bit weird about running it on the server, but it is kind of
nice.
There's a certain freedom to Fedora that just, you know, you can install whatever you want.
Of course, I know Fedora fairly well, so I feel really, really comfortable with it.
It feels just really, very much like home, so that's a pretty good one.
And yet, it also feels very much like Red Hat because it basically is, I mean, it's
the same stuff.
It's the same configuration, tools, same file locations.
So Fedora is not a bad idea either.
And then Debian, of course, is a great choice because they're huge and stable and well,
well supported, so Debian or Ubuntu, you know, I mean, I'm sure that's basically the
same.
I've never run a new Ubuntu server myself, but Debian, I have run a lot of the PowerPC
boxes lying around here at work.
They all run Debian and are serving files and web development environments for a different
person here and there.
So that's not bad.
FreeBSD is supposed to be really good as well, although I've never actually run it on
a server, so I wouldn't know for sure.
Okay.
So if you've installed any of those, then you're pretty much good to go.
And the great thing about these Linux and Unix distributions that we all seem to love
so much is that they're ready.
They were designed with the server client model in mind, where I don't even know.
Maybe the server client relationship was designed with Unix in mind.
I mean, I don't know how it all started, but this is classic computing.
This is the way that the forefathers dreamt of it.
And by forefathers, yes, I do mean George Washington and all those guys.
So setting up a server as an internet gateway, that'll be our first server exercise in this
mini-series, and we're going to go ahead and throw in DHCP service as well, because it's
very, very much related.
So let's assume that you've got a computer with two network cards available.
Network cards, I think, are pretty cheap, actually.
So if you don't have them available, you could probably find one pretty cheap these days.
There's, it doesn't have to be a super fast one if it's just playing around.
But otherwise, yeah, there you go, or you could hack some different boxes together.
I've done that plenty of times, even with the Macs that I find lying around, you know,
pull some memory out of one, and it's a hard drive out of the other, and you just kind
of make one better box than the two were separate.
So, you know, use your imagination, like I say, worst comes to worst.
Yeah, I'm sure you could do this with virtual machines or whatever.
So you could do it on a pen and paper and just draw it all out and write it down and
just pretend like it's networking.
But it would be better to have a computer.
So take whatever computer you've got that you're going to make your server.
And you should probably put a graphics card in it just temporarily because you need to
get onto that machine and configure it and stuff.
Of course, you've probably already got that because you've installed Linux onto it.
So you had to do that presumably with a graphics card.
If not, great.
If you can get into the computer without requiring a video card, that's really cool, too.
I generally just throw a graphics card in there so that I can see what I'm doing just
at least for the initial stage.
So you want to turn it on the box, install the distro if you haven't already.
And if you see any special options for like a server install, you may or may not want
to use them.
It doesn't honestly really matter.
Like I say, this is all, this is just how Linux works.
You don't have to do a special server install.
You can just do a normal, minimal install or a normal, normal install.
And you can always throw the server components on top of that.
And it'll work just the same way as anything else.
So don't be confused by distributions that have like a server addition or whatever.
It doesn't matter.
Okay, so you reboot.
And now you're sitting there at your login prompt and I don't know if you have to make
a user or not, it just kind of depends on the distribution that you're using.
But you may have to make an initial user in which you'll want to do.
You don't want to run this route the whole time, although you'll be doing a lot of root
activities, but you still don't want to just run this route.
You should have a user.
So the first thing that you'll want to do is the network configuration of that box.
And for this stage, it really does make it easier to be physically in front of that box.
Because if we, I mean, you could walk away from the box and SSH in.
But then once you start messing around with all the networking stuff, you're probably
going to lose your SSH connection and you'll have to like figure out what to connect to
again.
And it just kind of, it gets annoying.
It's not, it's not essential, but it's a lot easier.
And sometimes it is essential depending on what's going on, whether you've done everything
correct to be physically in front of that computer.
So an Internet Gateway is going to be the server that sits between you, your users,
and the worldwide web.
And the way that that works is that we need to get an IP address from your ISP to one
of your network cards.
That's the first step.
And the way to do that, at least in Red Hat and Fedora, is, and I'll talk about the
other ones in a minute as well, is located in slash at C slash sysconfig slash network
dash scripts.
And in that directory, you'll see a bunch of networking type scripts like if up dash
eth0, if config or IFCFG dash eth0, if down dash eth0, same series of things for the
loop back device and for the other networking card, which would be eth1.
So you'll see these little scripts residing there.
In Debian, you have slash network slash interfaces, and that's about all I know about it.
I know that I use that to establish a static IP address in some of the boxes that I use.
Sometimes I do it outside of that box with just DHCP.
So I haven't really used that a whole lot.
It's pretty similar also to the slash at C slash rc dot d slash rc dot i net one dot
conf or rc dot i net two dot conf in Slackware, where you are simply telling it, okay, I
know that I have two network cards.
You know that I have two network cards.
Here's what to do with each network card.
So the concept is the same.
It's just the location of that actual file, even the name of the file that you're going
to be specifying that information is completely different.
And if you've ever hard coded a static IP onto a computer in Linux, by hard coded, I mean
editing the actual text file, then this is actually already familiar to you.
If you have not done that, then this is going to seem a little bit unfamiliar to you,
but it is, if you just open up whatever system you're on, if you open up that text file
in typical Linux fashion, it's very well commented.
It says, this is where you configure your internet, your ethernet, your network interfaces.
And it gives you examples, at least Slackware does.
And I'm sure, yeah, W and does too, I remember.
So you can just kind of follow along.
And the basic idea of what you're telling it is what you're establishing a name for
the device, which your system has probably already established for you.
So there's probably, it's probably already going to be called something.
So you might as well just keep going with that.
You're going to assign a IP address and IP address to that network interface.
And notice that I'm saying you're assigning it to that network interface, not to that computer,
because that would be actually quite incorrect to say.
It's the IP address that you're assigning to that network card.
So what should that network card have as the IP address?
Should it have like 192.168.1.1?
No, of course not.
We're trying to get the internet into this.
We're not assigning it a local address right now.
So we're saying that we need to know whatever IP address is being sent to us from our ISP.
A classic way to do that, of course, is, well, I guess one way would be to talk to the
internet company that you're using, the ISP that you're using.
But probably more realistically, they're not going to know.
So just go to what's my IP.org.
And that of course tells you exactly what IP address you are sending out into the world.
That's how you're attached to the internet.
And we've seen this before, like I say, if you've followed along with the SSH episode,
we used this information to go out to a cafe or whatever and SSH back home.
And sometimes we had to do it with noip.com or dynamic dyndns, whatever.
So it's the same deal.
We just need to know how the internet is getting into this box from the cloud outside
down into our house, like a little cable or the DSL cable, whatever, into our house or
our building, and then through the wall and then out of the wall, plugged into our computer.
That IP address right there, that's what you want to make your servers first ethernet
card, that's the address you want to assign it.
Potential problem area would be if this address changes frequently in the various places
that I've lived in the past very long time, I have not had that issue actually.
It just seems like I realize that that's not a static IP and yet I'll go a year I think
and it just won't ever change.
So it might as well be static.
However, I've heard of people who's IP address just changes constantly.
It's like they're just always getting a different IP address from their service provider.
Or even worse, sometimes there's that whole, what is it, like, PPP over ethernet or something
or, well, basically it's when the company doesn't actually give you an IP address, they
give you a bridge to get into their network and so you're not getting, you don't actually
know your external IP address directly, you're not getting that IP address directly.
So in those cases, you can assign the server the IP address that you have right now in
this moment.
It might change later on.
For the exercise, it'll probably work fine for you, but if this is a long term thing,
it could be a little bit more complex.
It can be done, however, it can absolutely be done.
And the way that it would be done is that, well, especially if it's in, if it's like
a bridged modem setup where you're actually getting like a 172. something, something,
something, something, something, something, something, something, something addressed from
your internet company, then that would be the address of this server.
And that'll work fine, actually, but it'll be a little bit different in terms of what's
actually going on, but heck, as long as it's an internet signal, that'll work.
The prefix, let's just call it 24 right now because that's, that's the kind of network
we'll set up for now.
The gateway is going to be whatever the gateway, again, from your ISP that you are assigned.
So in this case, it would be, in my case, if my IP address that I'm getting in from the
ISP is 69.122.13.86, then the gateway address is 69.122.13.1, and that's pretty consistent.
Again, it's just, that's kind of information that you'll get from your ISP more than,
more than anything.
And you can usually take a stab at both of those numbers.
Like if you do at what's my IP.org and you find out your IP address, then you can just
knock that gateway number, the last number on that IP address down to 1, and that's probably
your gateway.
Your network, your net mask is usually 255.255.255.0, and there are lots of ways to change
that as well, but that's what we'll do for now.
And then the DNS 1 would be your initial DNS server, so we'll just, for now, we're going
to use 208.67.222.222, which is, of course, open DNS, and then the DNS 2 server will use
this 208.67.220.220.20.
We'll come in and change that in a different episode when we start setting up our own DNS
server, but for now, we're going to just leave it as open DNS services.
Of course, you could also use your ISP's service if you want.
It doesn't really matter to me, but you should obviously assign a DNS to this.
If there's an option for peer DNS, you should turn that off, and you can set your domain
name here of the network card, and I like to set this myself personally to somedomain.local,
because then my little intranet, if I decide to set one up, can all have something, something
about local addresses, and I just kind of, I don't know, that just makes sense to me.
Logically, that makes sense to me.
There are probably places that don't want to do it that way for very good reasons, like
their intranet and their actual domain are maybe the same or something like that.
It's not something that is necessary, but you certainly can make your little local network
can have the domain of some domain name.local, so for me, it's slackermedia.local.
You want to do the hardware address, so that's the MAC address of the network card, of
the network interface.
That's really important, because that's how the computer really knows which network card
it is.
You can call it whatever you like.
You want to make sure that you're actually speaking to the correct network card and everything.
If you don't know the MAC address, then just do an if, config, and find out the hardware
address of that card and enter it into the configuration.
There are typically other options available, like in Red Hat, you've got things like IPv4,
underscore failure, underscore fatal.
I set that to yes, IPv6 in it.
I set that to no, because I'm just not there yet.
I know, I should be.
I feel guilty about it.
Sorry.
The proto, I say none, because there doesn't need to be on boot.
I say yes, because there does need to be.
This thing needs to come up on boot.
You will typically find that, like I say, in the configuration file, whether it's the
Etsy slash network slash interfaces or whatever, or the rc.d slash rc.inet 1 or 2.conf, it's
almost always got examples.
It's usually got a lot of different options, and it kind of explains what those options
are.
The way that I started was I started with a bare minimum, which was basically the MAC address,
the IP address, the on boot flag, and well, the name, I put in a card name, and the DNS,
I put in the DNS servers, and the DNS servers and the domain name.
Then I kind of add more stuff onto that later.
For instance, I've got user control, that is user ctl.
I set that to no, because I don't want anyone on the server to be able to control the main
network interface.
In in control, currently I have set yet to yes, so that's network manager control, yes.
I'm trying to get away from that, because I feel like I'd have actually more control
if I didn't let network manager sort of own that card, but right now, that's turned
on, because it's convenient.
Look through the configuration file, copy what you see, kind of use your ad, again, the
concept is get an IP address from the ISP that you're using, and set this card to that.
And since this is kind of the master card, this is the one that all the other computers
are going to kind of defer to as their router, basically.
You want to make sure that it's got the important settings like DNS settings, and some kind
of, you know, the domain name, stuff like that, you want that to be present.
So set that, and then you'll be ready to set up the other network interface.
So at this point, like if you set up that card, and you've done an if config, and it's
all looking good, you should be able to ping something on the internet and get a signal
back.
And I mean, you should be able to ping the internet from that box, from that physical
box that we're setting up right now.
It should have a direct link right now to your ISP, so if you're not getting a ping
back from where you, from, from a site that you're pinging, and you believe that you
should, then you're doing something wrong.
And I would probably have to guess that it had something to do with the IP address that
you're assigning to that internet, to that network interface.
So verify that that's actually the IP address that is being distributed to you from your
ISP.
And really, it should almost, I mean, that should do it.
Try pinging an IP address if you're trying to ping like Google.com or something, and that's
not working.
Then try to ping some IP address of a place and see if that works, because it could
just be that you haven't set up your DNS servers, or it could be that you're not setting
up your, your DNS server correctly.
Maybe there's, maybe you've got a syntax error in there.
You forgot to quote the IP address of the open DNS server, or you mistyped it, or whatever.
So that, honestly, that, that step was really pretty straightforward when I set it up the
very first time.
That was not something that really gave me a whole lot of trouble.
It's basically just like setting up any kind of network card when you get an internet connection
with, with any old ISP.
Okay, so the next step then is to set up a second network card in that computer, which
you should see if you do an if config, you should see that you have an if zero and an
if one.
So if zero is going to be, well, is now configured to be your connection to the internet.
So if one is going to be your connection to all the other computers in the, in the house
or in the office or in the apartment, whatever.
So again, you would, on Red Hat, you would just do a VIM on slash, Etsy slash, sysconfig slash
network dash scripts slash if config dash, if one.
And that probably will already exist on a, a correct install.
It should have default values in that as well already.
But if not, then you can create it pretty simply.
And that is, again, the first line would be device equals ETH one.
In in control equals yes, if that's what you choose.
And right now it's probably simpler to just leave that on, on boot equals yes, the type
equals ethernet, boot proto is static.
So you want, this one to be statically assigned, you do not want this to change or anything
like that.
This is a static IP address that you're assigning this thing.
And, and that's a good thing.
IP address equals 192.168 dot, let's say eight dot one, or whatever, set some subnet for
yourself.
But yeah, it's, we'll go with 192.168 dot eight dot one.
Again, I'm going to skip over IP version six, guiltily because I just, I don't use that
yet.
So I'm going to call that a no, I'm going to call user control equaling no, and the hardware
address is going to be whatever the MAC address of that ethernet card is.
And that's really all I need for that inner, that particular interface.
So notice that it does not have a DNS setting.
It doesn't have a domain name setting.
It doesn't have any of that extra stuff that ETH zero had because that's not its job.
It's actually going to be deferring to ETH zero for all that information.
So that's, that's, that's this card's set up really.
So at this point, you should be able to do some kind of like, I don't know, if you need
to, and if can figure up or down, like if can figure down ETH, ETH one, and then bring
it back up with if can figure up ETH one, if you're on red hat, they kind of want you
to use like the little, the, the if up scripts, so you could do that too.
But however you need to bring the network card down and then back up, I, I usually like
to do that.
You could also, in theory, do like a service space network restart, just to make sure
that all your settings are kind of kicking in.
And actually before you do that, we should set IP forwarding to yes.
And the way that you do that is it's in atcslashciscontrol.conf.
And there's a setting that says net.ip4.ip underscore forward equals one.
Well it might say zero, but you want it to say one.
Meaning that you want to forward IP packets to the rest, you know, to your other, to the
other interfaces from one to the other interface.
This is the kind of the thing actually that makes this box into a router when the, when
the network comes into this computer that you're sitting at right now, the server, then
you are forwarding all those packets onto their various destinations.
So if someone requests something from hackerpublicradio.org, then when that request comes back, of course,
it has a header that says, hey, I'm destined for 192.168.8.86 on your network.
Could you send it to them?
Well, if you have net.ipv4.ip underscore forward set to zero, then that's not going to be forwarded
onto the rest of the network.
But if you set it to one, then it will be.
So that's the way that Red Hat does it.
And amazingly, for once, it's exactly the same on Debian.
It's the, it's the same file name, it's the same location.
The comments are a little bit different, but it's the same thing.
So it's just go into it with them or whatever is root user.
And uncomment the line that says net.ipv4.ip underscore forward equals, well, it's commented
out.
So it'll say one.
And then if you uncomment it, then suddenly you're enabling IP forwarding.
So exactly the same process.
The oddment out here is slackware.
But happily, the slackware method is exactly like, well, everything else you do on slackware.
It's really, really consistent.
You simply make the slash, etsy slash rc.d slash rc.ip forward script in, obviously the rc.d folder.
You make that executable.
And from then on, the packets will be forwarded and it will come on at boot time and everything
so that that box that you're configuring right there is now distributing, passing on all
that IP information to the other network interfaces.
So very, very clear and easy.
I mean, it's almost something that you don't even have to look up.
If you just poke around in the rc.d folder long enough, you see that pretty much everything
you want to do is right there.
And as long as it's executable, then it's going to start that service.
It's pretty nice.
So at this point where we've basically set up the server itself, it's, it is now a gateway
to the internet.
But one thing that you do want to do is, is have a DHCP server running somewhere, unless
you want to manually configure everything, but I mean, come on, you're not really going
to do that.
So let's just set up the DHCP server.
This is actually really marvelously simple.
This was one of those things that was just, I don't know, surprisingly amazingly easy
to do.
It's sort of simple like SSHD, SSH, where you just kind of turn it on and it just kind
of works.
It's almost that easy.
So we've got a little gateway server going.
Now we're going to add to that same physical box, a DHCP server.
So if you think about it, we really are kind of, we've got two servers in one physical
box.
And that's why I keep saying that when we hear the term server, it's kind of, it's very
accurate.
So a little bit deceptive because it's not just a server.
It's a computer with lots of little services or server applications running on it.
Okay.
So we've got this thing and so we need to now install DHCP D. And you'll notice, you'll
start to notice that a lot of these services that we are running all the time end with
D because they're damons.
They just kind of run per in the background happily.
And they're just sitting there so that when someone pings them, they hear that request
and they serve out whatever information they're designed to serve out.
So you know, on whatever platform you're running, you can just install if it doesn't
already exist on the computer, DHCP D package, whatever that would be.
I don't even know.
Everything I've ever set up has already had that on it.
All I had to do was actually initiate it.
But before we do initiate it, we want to make sure that we have a good configuration file
in place.
And on redhat and fedora, that's in slash atc slash DHCP slash DHCP D.conf, at least by default.
There are other DHCP servers.
I mean, the big, I guess the default one, very often is DHCP D.
But there are other DHCP servers out there.
Some of them are considered more lightweight or whatever.
So if you're installing a lot of this sort of by hand or whatever, then you can choose
maybe a different one, but the one that I've used has only been on a redhat server and
it's only been DHCP D.
So that's the one that I can talk to you about.
And W and I've never made a DHCP server before.
The W and boxes around here are typically the file servers, so they get their addresses
from the main DHCP server.
On Slackware, it is in DHCP rather, is in slash usr slash espin slash DHCP D.
You can start that manually, I guess, I, this probably not recommended.
You can install it when you're installing Slackware.
You can probably grab it off of the, or rather a Startup script, you can install, if I recall
correctly, when you're setting up Slackware.
And there's also one on alien bobs of wiki or his site, rather.
It's conny.slackware.com slash tilde alien slash RC underscore scripts, and you can find
some RC scripts in there.
So I've never actually run one on Slackware either, so I don't really, I don't have a
whole lot of experience with that.
It's just the ones that I have done have been on redhat, and then someone fedora just
kind of playing around, but the one that's in production is on redhat.
Either way, it's a really easy setup.
The configuration is pretty, pretty easy, it's, I mean, it can be complex if you want
it to be.
But the default input into this file, this conf file, and again, it'll be well commented
as well.
But you want to set an option, option domain-name, and then in quotes, whatever the domain name
is of your network.
So in my case, like I said, it's going to be quote, slackermedia.local, end quote, semicolon.
You have to remember the semicolons.
I cannot tell you how many times, unfortunately, I have failed to place a semicolon on some
random line in the DHCP, d.conf file, and just completely, completely, utterly, you wasted
like an hour trying to figure out what I'd done wrong, and of course it was just a semicolon.
So another option that you'd want to set are the domain name server.
So option domain-name-servers, and that'll be 208.67.222.222, comma 208.67.220.220, I might
have those reversed, but you get the idea.
Just look up the open DNS IP addresses.
I always forget which one is there first and their second one doesn't really matter,
I guess.
Anyway, you've got, we've just defined the DNS and the domain name that we're now going
to forward onto all the clients whenever they join onto our network.
So that's kind of nice.
And you would want to do that really, most of all, if you're going to start running your
own internal DNS service, because you want them to inherit your DNS server first before
they go out to some other one outside, or you might want to make sure that they're inheriting
your open DNS setting, because you might have some kind of site-specific settings through
the open DNS control panel.
So you want to make sure that all your clients are getting that.
It's kind of nice.
I mean, just superficially here, we have some open DNS settings.
Just things like the company logo appears on the failure page when it doesn't resolve
to anything.
It'll show the company logo and say, we're sorry, you didn't get to where you want.
And if there was anything that you were blocking on that network through open DNS, then, you
know, unixform.com, you might be blocking that, because you don't want people looking at
pictures of desktops, so they would get blocked that way, whereas if no one was inheriting
your DNS services, then everyone in the building would be looking at unix porn all day.
Now we want to define our subnet.
And now, since we only have two network cards in our physical server, one of which is ingesting
the internet and sending stuff back out to the internet, the other card is essentially,
if you think about it, that's the router, that's the thing that's going to define the subnet.
That's everything on one subnet is talking to that one card.
If we had three cards, then we could have two subnets, because we've got one for the internet,
and we've got two for the internal distribution of IP addresses.
If we had four ethernet cards, then we could have three subnets and so on and so forth.
So right now, since we're doing a simple setup, we only get one subnet.
But that's okay.
That's all we need.
So we'll do subnet space 192.168.8.0, space net mask, space 255.255.255.0.
So we're just saying that everything in this subnet, everything talking to this card,
is one big pool of IP addresses.
We'll open up a curly bracket.
I think of this as kind of like a CSS block, you know, like if you've ever seen a style sheet,
they have like the class name or the ID name, and then they have an open curly bracket,
and then you have all the lines, and then you close the curly bracket under that.
That's kind of what we're doing.
So we open a curly bracket, and then the next line, you can say options, space, routers,
space, 192.168.8.1.
So if you recall, from when we were setting up the server, the big server that we just set
up, well, we're still setting it up, but you know, the network interfaces, I should say,
we had defined not the internet network card, but the internal network card that we're
using for the rest of the computer as 192.168.8.1 static address.
So that means that everything in this subnet now is inheriting the fact that the router
that they're going to be talking to, to send information and get information back from,
has the address of 192.168.4.1.
And that, my friends, is where they get all the packets, and that's where they send all
the packets, which are then forwarded to the other network card, which are forwarded
to the router at your ISP, which are then forwarded to the internet, and magic happens.
Next line, option, space, subnet, dash, dash, mask, space, well, again, that's 255.255.255.0,
because we only have one network card, and so we only have one subnet mask.
Remember to put semicolons, I think I just now forgot to put one after the router line,
so 192.168.8.1 semicolon, and on this subnet mask, 255.255.255.0, semicolon.
The next line will be option, space, broadcast, dash, address, and that is, in this case,
it'll be 192.168.8.254 semicolon.
That's basically everything on up to the very last IP address.
The range, this is an interesting one, this is kind of cool.
This is actually, to me, this is one of the most fun things about having a server, like
a DHCP server, for some reason, maybe just because it's really familiar to me, because
I used to do this kind of thing in the little routers that I would buy from Best Buy.
But the range lets you decide what portion of the potential IP addresses that this server
is generating now.
But range of those addresses, you're going to hand over to DHCPD for it to just automatically
hand out to all the people who sign onto your network, meaning that you could do like
a range of 192.168.8.80 space, 192.168.8.253, and say that those are the addresses that
get automatically assigned to clients.
And that means that you have 80 addresses at the beginning of that, well, 79 addresses,
at the beginning of your subnet, where you can statically assign those to the computers
that you want to statically assign them to.
Obviously, you would want some static assignments, right?
You'd want this server to have a static assignment.
You don't want the 192.168.8.1 to suddenly become 8.8.
You might have a file server on the network.
You might have a network attached printer that you would want to obviously always be at
the same address.
So all of these things, you can assign hard coded into this very configuration file, which
we'll do in a minute, and the DHCPD server will not then take over those addresses and
assign them out to other people.
So it's a kind of a cool feature.
You've got a lot of control, a lot of fine-grained control.
Remember to end that line in A. Let's go ahead and say it out loud.
Loud and long, say it, semi-colon, yes.
Default-least-time space, heck, I don't know.
I just put in a bunch of big numbers, 88,000, no commas.
Symi-colon max-least-time space, I don't know, 120,000, semi-colon.
I don't really have an issue with this.
I could actually probably even lengthen it.
There's just not that much problem with the length of the leads times.
But obviously, again, you get a lot of fine-grained control here, so you can actually control how
often you're forcing people to refresh their IP address, stuff like that.
Now we close the curly bracket.
Right under here, like if we had another network card, then we could create another subnet.
If we had another Ethernet card, we could create another subnet.
Basically, the trick is that the router becomes the name of that network card, or the router
becomes the IP address of that network card.
If you think back, when we were setting up that other Ethernet card, network card, we
were saying that that gets the static assignment of 192.168.8.1, then we were saying we would
go over to the next network card in our configuration file, whether it's rc.inet.3.conf, or whether
it's if CFG-E2, whatever it is, then you can assign that a different address, and that
becomes the router for that subnet, so that would become option space routers.
Space 192.168.8.1, let's say 1, 2, 9, and then you would set your subnet mask to 255255.255.128
semicolon, and so on and so forth.
You can do that as much as you want, and subnet the thing, and you'll have to read up on
subnets and figure out whether they're right for you, whether they're worth doing or not.
It's really kind of, there are good points to it, and they're sort of like, why are you
bothering points to it, and they each have their own different reason for existing.
It turns out that I find it very helpful because it kind of can isolate certain departments.
It doesn't hard isolate, it's not a firewall, but it reduces the noise, because
if you're sending packets around from computers on one subnet, they know they have to probe
the other subnet for addresses and stuff. They know that that computer isn't on that subnet,
because it's a 1, 9, 2.168.9 address, so they don't even have to go to that floor in that department
and scan that range of computers. So that's kind of nice, but it's just kind of something
that it's not something that I've ever so far in my very, very limited experience set up,
and just like, oh my gosh, that's changed my life. But I'm sure there's some server admin out there
who has had their life changed by subnets, and when I meet that person, I will interview them.
So next block of code here, or configuration lines, whatever, are the static assignments,
and this is really easy, you just say host, space, host name, whatever the host name is,
space, curly bracket, and then inside of this curly bracket stands out, we have hardware,
space, ethernet, space, you know, zero zero, I mean, zero zero colon, 2, 6 colon, 9a colon, 20 colon,
EC colon, C8 colon, 48, semicolon, remember those semicolons, and then fixed-address space,
192.168.8.8, semicolon, and then close the curly bracket, and all that does,
I mean, you can probably just figure that out, I probably don't even need to tell you exactly
what that's doing, so there you go. All right, so now we've just configured the DHCPD.conf,
so that is what the Damon that runs DHCP will look to to figure out what it's supposed to do,
what address is it's supposed to hand out, what address is it's supposed to keep away from,
when it sees a certain MAC address, what address to give that MAC address if it's been hard coded,
static, whatever. The only thing really we have to do is restart that service if it's running,
so if it's already running on Red Hat, it would be service DHCPD restart, or start if it's not
running at all. On Debian, of course, it would be slash Etsy slash init.d slash DHCPD
space restart or start, or whatever it needs to be, on Slackware, you can just restart the script,
the same way, it's slash Etsy slash rc dot d slash rc dot DHCPD, and then you could restart or
start whatever you have to do. And there you go, that's the DHCP server, so now you can step
away from that server finally, and you can plug another computer into that ethernet port,
or you could plug a switch into that ethernet port, that'd be cool, and then plug another computer
into that switch, and maybe a wireless router into that switch, and a printer into that switch,
all kinds of devices, just plug them into a switch, plug that switch into the network card,
the network card that isn't serving the internet, or that isn't getting the internet,
and then that will latch onto that server, and suddenly the magical blue smoke will
come out of the server through the little cable into the switch, and it'll just go everywhere,
it'll be all over the place, you'll have internet's in just all over the place, you won't be
able to get it out for weeks. Of course, I really should probably mention that if you are on the
internet in this fashion, you've set up a router, but we haven't even touched on a firewall,
so right now you've got the internet coming into this box, completely, basically unadulterated,
it's just the internet, meaning that that's really, really dangerous. There's usually a default
set of IP tables that come along with any kind of major Linux distribution, so you should
turn that on. You can get a list of IP tables, and I'm not about to attempt to do an IP tables
tutorial, because I'm nowhere near knowing enough about that to speak intelligently about it,
but you can get a list of your IP tables as root user, IP tables space dash L, and then you can
see if there are default settings that are usually really good default IP tables included.
If you don't know IP tables at all, then you may want to go ahead and
not go into the internet yet, but you might want to turn on the X11 firewall configuration tool
that comes along with your distribution, whatever that would be, and then you can make sure that
there are some sane settings in there. Like I say, usually there are some really good default
settings, so that if you do this exercise, you're not completely opening up your box
to the entire world, but understand that that is what's happening here. You've got
the internet coming into your wall, and you've got it plugged into a computer. There's no friendly
little router box between that computer and the whole world right now. There's no
thing, no router there that protects really a whole lot, so you want to make sure that IP tables
are turned on and that they've got some good default settings before you continue too much longer.
And that's it. That's all I can say about setting up a gateway and a DHCP server. I hope you've
enjoyed this episode. I hope it has been informative and maybe demystified some of the things about
servers. Next episode we're going to go right into DNS server setting up there of. So join me
next episode for setting up a DNS server.
Thank you for listening to Hacker Public Radio. For more information on the show and how to
contribute your own shows visit Hacker Public Radio dot org.