Let a project's container run a VPN client

A VPN client installed in a container today starts, runs, and then hangs
until its connection times out. Nothing reports an error: a default
container has no /dev/net/tun to open and no CAP_NET_ADMIN to add an
interface or a route with, and clients surface that as a generic timeout
rather than a permissions failure.

Add an opt-in per-project "VPN support" switch granting the three things
a tunnel needs. They are useless individually, which is why
vpn_host_config() defines the set in one place and the tests assert all
of it:

  * CAP_NET_ADMIN — Docker's default bounding set has net_raw but not
    net_admin, so a client can ping but never connect.
  * /dev/net/tun — passed through from the host so the kernel's tun
    module backs it, rather than mknod-ed inside.
  * net.ipv4.conf.all.src_valid_mark — WireGuard's wg-quick sets this and
    cannot from inside a container, /proc/sys being read-only, so its
    handshakes are dropped by reverse-path filtering.

Off by default and deliberately opt-in: NET_ADMIN lets anything in the
container reconfigure that container's network stack. It is namespaced —
no authority over the host's interfaces or any other container.

Capabilities and devices are fixed when a container is created, so this
is container state and takes the label-and-compare treatment.
triple-c.vpn-support is written unconditionally, false included, for the
usual docker commit reason: a true stamped once would ride the snapshot
image into every future container and make the switch impossible to turn
back off. A missing label reads as false and off is byte-identical to
today, so no existing project is churned.

Requesting the device fails at creation when the host kernel has no tun
module, which would otherwise surface as a project that simply refuses to
start. explain_create_failure() rewrites that one error to name the
switch and the Docker-Desktop-VM-versus-your-machine distinction, and
leaves every other failure untouched.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

.gitea/workflows/build-app.yml

@@ -39,48 +39,13 @@ jobs:
           MAJOR_MINOR=$(cat VERSION | tr -d '[:space:]')
           echo "Major.Minor: ${MAJOR_MINOR}"
 
-          # The patch number is **one past the highest patch already used**, and
+          # Find the latest tag matching v{MAJOR_MINOR}.N (exclude -mac, -win suffixes)
-          # never a distance.
+          # `|| true` so an empty grep result doesn't fail the step under pipefail.
-          #
+          LATEST_TAG=$(git tag -l "v${MAJOR_MINOR}.*" --sort=-v:refname | grep -E "^v${MAJOR_MINOR}\.[0-9]+$" | head -1 || true)
-          # It used to be `git rev-list --count <highest tag>..HEAD`, which is
-          # not a counter at all: it measures how far HEAD has drifted from
-          # whichever tag sorts highest, and that resets to zero every time a
-          # tag is cut. The published history is the proof — each of these is
-          # exactly what the old formula returned at the time:
-          #
-          #   v0.4.0 -> 3 commits -> v0.4.3    looked fine
-          #   v0.4.3 -> 4 commits -> v0.4.4    fine by luck, 4 > 3
-          #   v0.4.4 -> 2 commits -> v0.4.2    went backwards
-          #   v0.4.4 -> 6 commits -> v0.4.6    jumped, skipping .5
-          #   v0.4.6 -> 3 commits -> v0.4.3    already taken; the upload failed
-          #
-          # Reusing a version is worse than failing to publish one: the macOS
-          # and Windows steps replace assets in place, so a duplicate silently
-          # rewrote a release that had been public for three days. Monotonic
-          # numbering is what stops that at the source.
-          #
-          # Suffixed tags count too. `create-tag` is skipped when any platform
-          # job fails, so a run can publish v0.4.7-mac and never create the
-          # plain v0.4.7 — reading only unsuffixed tags would then hand the
-          # same number out twice.
-          HIGHEST=$(git tag -l "v${MAJOR_MINOR}.*" \
-            | grep -E "^v${MAJOR_MINOR}\.[0-9]+(-mac|-win)?$" \
-            | sed -E "s/^v${MAJOR_MINOR}\.([0-9]+).*/\1/" \
-            | sort -n | tail -1 || true)
 
-          # A re-run of a commit that already released must not mint a new
+          if [ -n "$LATEST_TAG" ]; then
-          # version just because its own tag now exists.
+            echo "Latest matching tag: ${LATEST_TAG}"
-          EXISTING=$(git tag --points-at HEAD \
+            PATCH=$(git rev-list --count "${LATEST_TAG}..HEAD")
-            | grep -E "^v${MAJOR_MINOR}\.[0-9]+$" \
-            | sed -E "s/^v${MAJOR_MINOR}\.([0-9]+)$/\1/" \
-            | sort -n | tail -1 || true)
-
-          if [ -n "$EXISTING" ]; then
-            echo "HEAD is already tagged v${MAJOR_MINOR}.${EXISTING} — reusing it"
-            PATCH="${EXISTING}"
-          elif [ -n "$HIGHEST" ]; then
-            echo "Highest patch already used on this line: ${HIGHEST}"
-            PATCH=$((HIGHEST + 1))
           else
             # A minor line nobody has tagged yet is a *new* line, and a new line
             # starts at .0 — that is what "we are moving to 0.4.x" means. The
@@ -200,70 +165,21 @@ jobs:
         env:
           TOKEN: ${{ secrets.REGISTRY_TOKEN }}
         run: |
-          set -euo pipefail
           TAG="v${{ needs.compute-version.outputs.version }}"
-
+          # Create release
-          # Idempotent get-or-create, matching build-macos. This step used to
+          curl -s -X POST \
-          # POST /releases unconditionally: against a tag that already existed
-          # Gitea answered 409, the grep below found no id, and the run died
-          # with a bare "exitcode '1'" and not one line of output explaining
-          # it — `curl -s` with no `-f` swallows the HTTP error, so nothing
-          # ever said "409" or "duplicate tag". Hence -fsS throughout, and
-          # pipefail so a failure cannot be stepped over.
-          HTTP_CODE=$(curl -sS -o release.json -w '%{http_code}' \
-            -H "Authorization: token ${TOKEN}" \
-            "${GITEA_URL}/api/v1/repos/${REPO}/releases/tags/${TAG}")
-          case "${HTTP_CODE}" in
-            200)
-              echo "Release ${TAG} already exists, reusing"
-              ;;
-            404)
-              echo "Creating release ${TAG}"
-              curl -fsS -X POST \
             -H "Authorization: token ${TOKEN}" \
             -H "Content-Type: application/json" \
             -d "{\"tag_name\": \"${TAG}\", \"name\": \"Triple-C ${TAG} (Linux)\", \"body\": \"Automated build from commit ${{ gitea.sha }}\"}" \
             "${GITEA_URL}/api/v1/repos/${REPO}/releases" > release.json
-              ;;
+          RELEASE_ID=$(cat release.json | grep -o '"id":[0-9]*' | head -1 | grep -o '[0-9]*')
-            *)
-              echo "Unexpected ${HTTP_CODE} looking up release ${TAG}:" >&2
-              cat release.json >&2
-              exit 1
-              ;;
-          esac
-
-          RELEASE_ID=$(python3 -c "import json,sys; print(json.load(open('release.json')).get('id',''))")
-          if [ -z "${RELEASE_ID}" ]; then
-            echo "No release id for ${TAG}; refusing to upload into nothing:" >&2
-            cat release.json >&2
-            exit 1
-          fi
           echo "Release ID: ${RELEASE_ID}"
-
+          # Upload each artifact
-          # Replace-not-conflict, so a retry after a partial upload succeeds.
-          # Versions are monotonic now (see compute-version), so this can only
-          # ever be replacing an asset from a failed run of this same commit —
-          # never one belonging to an already-published version.
           for file in artifacts/*; do
             [ -f "$file" ] || continue
             filename=$(basename "$file")
-
-            EXISTING_ID=$(curl -sS \
-              -H "Authorization: token ${TOKEN}" \
-              "${GITEA_URL}/api/v1/repos/${REPO}/releases/${RELEASE_ID}/assets" \
-              | python3 -c "import json,sys; t=sys.argv[1]; print(next((a['id'] for a in json.load(sys.stdin) if a.get('name')==t), ''))" "${filename}" || true)
-            if [ -n "${EXISTING_ID}" ]; then
-              echo "Deleting existing asset ${filename} (id ${EXISTING_ID})"
-              curl -fsS -X DELETE \
-                -H "Authorization: token ${TOKEN}" \
-                "${GITEA_URL}/api/v1/repos/${REPO}/releases/${RELEASE_ID}/assets/${EXISTING_ID}"
-            fi
-
             echo "Uploading ${filename}..."
-            curl -fsS --http1.1 \
+            curl -s -X POST \
-              --retry 5 --retry-all-errors --retry-delay 5 \
-              --max-time 600 \
-              -X POST \
               -H "Authorization: token ${TOKEN}" \
               -H "Content-Type: application/octet-stream" \
               --data-binary "@${file}" \

CLAUDE.md

@@ -287,21 +287,10 @@ container is created once by a very long function where a dropped capability is
   Any two without the third still presents as a connection that hangs to a timeout, which is why
   the tests assert the whole set.
 - **The device is passed through from the host, never `mknod`-ed inside.** The kernel's `tun`
-  module has to back it.
+  module has to back it. When the host has no such device the failure lands at *creation* — the
-- **A missing device fails at `start`, not `create` — verified against Docker 29.7.** `docker
+  project simply won't start — so `explain_create_failure()` rewrites that one error to name the
-  create --device /dev/does-not-exist` succeeds and prints an id; runc resolves the device (and
+  switch and the Docker-Desktop-VM-vs-your-machine distinction. Do not let it degrade to a raw
-  validates sysctls) only when it builds the container. So the guard belongs on the start path:
+  bollard string.
-  `explain_container_failure()` covers both and is called from `start_container`, where it has a
-  container id and no project — which is why it keys off the error naming `/dev/net/tun` rather
-  than off `vpn_support_enabled`. Nothing else in Triple-C requests a device, so that is
-  unambiguous. A version of this check wired to `create` alone is dead code that looks correct.
-- **`NET_ADMIN` here is not user-namespaced.** Docker does not enable userns remapping by default,
-  so only the *network* namespace confines it: no reach onto host interfaces, but promiscuous
-  mode, arbitrary addresses/routes/NAT on the shared `docker0` segment (sibling containers, the
-  LiteLLM gateway among them, are ARP-spoofable), netlink-triggered host module auto-load, and
-  enough authority to flush in-container netfilter rules that sandbox mode may rely on. Keep the
-  code comments honest about this — an earlier draft claimed it "confers no authority" outside the
-  container, which is too strong.
 - **`triple-c.vpn-support` is written unconditionally, including `false`.** The usual
   `docker commit` reason: a `true` stamped once would ride the snapshot image into every future
   container and make the switch impossible to turn off.

HOW-TO-USE.md

@@ -477,24 +477,19 @@ When enabled, the container is given the three things a VPN client needs to buil
 the `NET_ADMIN` capability, the `/dev/net/tun` device, and the `net.ipv4.conf.all.src_valid_mark`
 sysctl that WireGuard requires. This is **off by default**.
 
-Without it, a client such as PIA, WireGuard or OpenVPN installs and its daemon starts normally, but
+Without it, a client such as PIA, WireGuard, OpenVPN or Tailscale installs and its daemon starts
-the connection attempt **hangs until it times out** — a default container has no tun device to open
+normally, but the connection attempt **hangs until it times out** — a default container has no tun
-and no permission to add an interface or a route, and most clients report that as a generic timeout
+device to open and no permission to add an interface or a route, and most clients report that as a
-rather than a permissions error.
+generic timeout rather than a permissions error.
 
 Things worth knowing:
 
-- Tailscale is the exception: in its `--tun=userspace-networking` mode it needs neither the
+- `NET_ADMIN` applies to the container's **own** network namespace. It confers no authority over
-  capability nor the device, so leave this off if that is all you want.
+  the host's interfaces or over any other container. It does mean anything running in the
-
+  container can reconfigure that namespace, which is why it is opt-in.
-- `NET_ADMIN` applies to the container's **own** network namespace — it cannot touch the host's
-  interfaces. It is not nothing, though: within that namespace anything in the container can set
-  promiscuous mode and add arbitrary addresses, routes and firewall rules on the Docker bridge it
-  shares with your other containers, and it can flush firewall rules that sandbox mode relies on.
-  Grant it per project, to projects that need it.
 - The **Docker host's** kernel must have the `tun` module available. With Docker Desktop that is
-  the Linux VM, not your own machine. If it is missing, the container is created but fails to
+  the Linux VM, not your own machine. If it is missing, the container fails to create with an
-  **start**, with an error naming `/dev/net/tun` and pointing back at this setting.
+  error naming `/dev/net/tun` and pointing back at this setting.
 - A VPN client's kill switch applies to everything in the container, Claude Code included. If the
   tunnel drops, expect API calls to fail until it reconnects or the kill switch is turned off.
 

app/src-tauri/src/docker/container.rs

@@ -830,16 +830,8 @@ type VpnHostConfigParts = (
 ///   its handshake packets are dropped by reverse-path filtering. Harmless for
 ///   OpenVPN-based clients, so it is set unconditionally with the rest.
 ///
-/// What it costs, stated accurately: Docker does not enable user-namespace
+/// This is namespaced to the container's own network stack: `NET_ADMIN` confers
-/// remapping by default, so this is a real `CAP_NET_ADMIN` in the *initial*
+/// no authority over the host's interfaces or over any other container.
-/// user namespace and only the **network** namespace confines it. It cannot
-/// touch the host's interfaces, but within its own namespace it can set
-/// promiscuous mode and add arbitrary addresses, routes and NAT rules on the
-/// shared `docker0` L2 segment — which puts sibling containers (the LiteLLM
-/// gateway among them) within reach of ARP spoofing, and lets netlink trigger
-/// host-kernel module auto-loading. It is also enough to flush netfilter rules
-/// inside the container, so pair it with `sandbox_mode_enabled` advisedly.
-/// Hence opt-in, per project, rather than on for everyone.
 fn vpn_host_config(enabled: bool) -> VpnHostConfigParts {
     if !enabled {
         return (None, None, None);
@@ -865,42 +857,31 @@ fn vpn_host_config(enabled: bool) -> VpnHostConfigParts {
 
 /// Turn the daemon's device-passthrough failure into an explanation.
 ///
-/// **This fires on `start`, not `create`.** Verified against Docker 29.7:
+/// Requesting `/dev/net/tun` fails at *creation* when the host kernel has no
-/// `docker create --device /dev/does-not-exist` succeeds and prints an id; the
+/// `tun` module — and the raw bollard error names a path the user will look for
-/// device is only resolved when runc builds the container, so the failure lands
+/// on the wrong machine, since with Docker Desktop the relevant host is the
-/// on the *next* call. Sysctls validate at the same point. Anything that
+/// Linux VM rather than their own. Left unmapped this surfaces as a project
-/// inspects only the create path will never see it — which is why both paths
+/// that simply refuses to start, with nothing pointing back at the switch that
-/// route through here and the tests exercise the start-side string.
+/// caused it.
-///
+fn explain_create_failure(err: &str, vpn_enabled: bool) -> String {
-/// Unmapped, this reads as `Failed to start container: Docker responded with
+    let device_missing = vpn_enabled
-/// status code 500: error gathering device information while adding custom
+        && err.contains(TUN_DEVICE)
-/// device "/dev/net/tun": no such file or directory` — a path the user will go
-/// looking for on the wrong machine, since with Docker Desktop the relevant
-/// host is the Linux VM rather than their own, and with nothing pointing back
-/// at the switch that caused it.
-///
-/// Deliberately not gated on `vpn_support_enabled`: nothing else in Triple-C
-/// ever asks for a device, so an error naming `/dev/net/tun` can only have come
-/// from a container created with the switch on. That keeps the check usable
-/// from [`start_container`], which has a container id and no project.
-fn explain_container_failure(action: &str, err: &str) -> String {
-    let device_missing = err.contains(TUN_DEVICE)
         && (err.contains("no such file or directory")
             || err.contains("No such file or directory")
             || err.contains("error gathering device information"));
 
     if device_missing {
         return format!(
-            "Failed to {} container: the Docker host has no {} device, which \
+            "Failed to create container: the Docker host has no {} device, which \
              \"VPN support\" requires. The host kernel needs the `tun` module \
              loaded (on Docker Desktop that is the Linux VM, not your own \
              machine). Turn VPN support off in Config → Runtime to start this \
              project without it. Original error: {}",
-            action, TUN_DEVICE, err
+            TUN_DEVICE, err
         );
     }
 
-    format!("Failed to {} container: {}", action, err)
+    format!("Failed to create container: {}", err)
 }
 
 pub async fn create_container(
@@ -1593,7 +1574,7 @@ pub async fn create_container(
     let response = docker
         .create_container(Some(options), config)
         .await
-        .map_err(|e| explain_container_failure("create", &e.to_string()))?;
+        .map_err(|e| explain_create_failure(&e.to_string(), project.vpn_support_enabled))?;
 
     Ok(response.id)
 }
@@ -1603,7 +1584,7 @@ pub async fn start_container(container_id: &str) -> Result<(), String> {
     docker
         .start_container(container_id, None::<StartContainerOptions<String>>)
         .await
-        .map_err(|e| explain_container_failure("start", &e.to_string()))
+        .map_err(|e| format!("Failed to start container: {}", e))
 }
 
 pub async fn stop_container(container_id: &str) -> Result<(), String> {
@@ -2789,53 +2770,31 @@ mod tests {
         assert_eq!(cap_add.unwrap(), vec!["NET_ADMIN"]);
     }
 
-    /// What bollard actually hands us when a tun-less host rejects the device.
-    ///
-    /// Captured verbatim from Docker 29.7: `docker create` with a missing
-    /// device **succeeds**, and this arrives from the subsequent `start`.
-    /// `DockerResponseServerError`'s Display is
-    /// `"Docker responded with status code {code}: {message}"` with the
-    /// daemon's message unaltered.
-    const REAL_TUN_ERROR: &str = "Docker responded with status code 500: error \
-        gathering device information while adding custom device \
-        \"/dev/net/tun\": no such file or directory";
-
     #[test]
-    fn a_missing_tun_device_is_explained_on_the_path_that_actually_fails() {
+    fn a_missing_tun_device_is_explained_rather_than_echoed() {
-        // The start path is the one that matters: the daemon defers device
+        let raw = "error gathering device information while adding custom device \
-        // resolution to runc, so create returns an id on a host with no tun
+                   \"/dev/net/tun\": no such file or directory";
-        // module and only start fails. A version of this that checked create
+        let msg = explain_create_failure(raw, true);
-        // alone would be dead code.
-        let msg = explain_container_failure("start", REAL_TUN_ERROR);
-        assert!(msg.starts_with("Failed to start container:"), "{}", msg);
         assert!(msg.contains("VPN support"), "should name the switch: {}", msg);
         assert!(msg.contains("tun` module"), "should name the cause: {}", msg);
-        assert!(msg.contains("Config → Runtime"), "should say where to fix it: {}", msg);
+        assert!(msg.contains(raw), "should keep the original error: {}", msg);
-        assert!(msg.contains(REAL_TUN_ERROR), "should keep the original: {}", msg);
-    }
-
-    #[test]
-    fn the_same_explanation_covers_create_if_the_daemon_ever_checks_earlier() {
-        // Belt and braces — older and future daemons may validate at create.
-        let msg = explain_container_failure("create", REAL_TUN_ERROR);
-        assert!(msg.starts_with("Failed to create container:"), "{}", msg);
-        assert!(msg.contains("VPN support"), "{}", msg);
     }
 
     #[test]
     fn unrelated_failures_are_left_alone() {
-        for (action, err) in [
+        // Including a tun error on a project that never asked for VPN support —
-            ("create", "Conflict. The container name \"/triple-c-x\" is already in use"),
+        // that came from somewhere else and must not be misattributed.
-            ("start", "Docker responded with status code 404: No such container"),
+        let name_clash = "Conflict. The container name \"/triple-c-x\" is already in use";
-            ("start", "error gathering device information while adding custom device \"/dev/dri/card0\""),
-        ] {
         assert_eq!(
-                explain_container_failure(action, err),
+            explain_create_failure(name_clash, true),
-                format!("Failed to {} container: {}", action, err),
+            format!("Failed to create container: {}", name_clash)
-                "{} should pass through untouched",
+        );
-                err
+
+        let tun_err = "no such file or directory: /dev/net/tun";
+        assert_eq!(
+            explain_create_failure(tun_err, false),
+            format!("Failed to create container: {}", tun_err)
         );
-        }
     }
 
     #[test]

app/src-tauri/src/models/project.rs

@@ -148,14 +148,13 @@ pub struct Project {
     /// Grant the container what a VPN client needs to build a tunnel:
     /// `CAP_NET_ADMIN`, the `/dev/net/tun` device, and the WireGuard
     /// `src_valid_mark` sysctl. Without all three a client (PIA, WireGuard,
-    /// OpenVPN) installs and runs but its connection attempt hangs until it
+    /// OpenVPN, Tailscale) installs and runs but its connection attempt hangs
-    /// times out, because it cannot create the tunnel interface or touch the
+    /// until it times out, because it cannot create the tunnel interface or
-    /// routing table.
+    /// touch the routing table.
     ///
     /// Off by default and deliberately opt-in: `NET_ADMIN` lets anything in the
-    /// container reconfigure its own network stack, which reaches further than
+    /// container reconfigure its own network stack, which is a meaningful step
-    /// it sounds — see `vpn_host_config` for what it does and does not confer.
+    /// out of the default sandbox. Unlike `auth_bridge_enabled` this *is*
-    /// Unlike `auth_bridge_enabled` this *is*
     /// container state, so it carries a `triple-c.vpn-support` label and is
     /// compared in `container_needs_recreation` — capabilities and devices are
     /// fixed at creation and can only change by recreating the container.

app/src/components/projects/home/config/RuntimeSection.test.tsx

@@ -1,94 +0,0 @@
-import { describe, it, expect, vi, beforeEach } from "vitest";
-import { render, screen, fireEvent } from "@testing-library/react";
-import RuntimeSection from "./RuntimeSection";
-import type { Project } from "../../../../lib/types";
-
-const baseProject: Project = {
-  id: "p1",
-  name: "api-server",
-  paths: [{ host_path: "/src/api", mount_name: "api" }],
-  container_id: null,
-  status: "stopped",
-  backend: "anthropic",
-  bedrock_config: null,
-  ollama_config: null,
-  llamacpp_config: null,
-  openai_compatible_config: null,
-  allow_docker_access: false,
-  sandbox_mode_enabled: true,
-  mission_control_enabled: false,
-  auth_bridge_enabled: false,
-  browser_view_enabled: false,
-  vpn_support_enabled: false,
-  use_shared_auth_token: true,
-  full_permissions: false,
-  permission_mode: null,
-  ssh_key_path: null,
-  ca_cert_path: null,
-  git_token: null,
-  git_user_name: null,
-  git_user_email: null,
-  custom_env_vars: [],
-  port_mappings: [],
-  claude_instructions: null,
-  claude_code_settings: null,
-  renamed_session_names: {},
-  created_at: "2026-01-01T00:00:00Z",
-  updated_at: "2026-01-01T00:00:00Z",
-};
-
-const VPN = "VPN support";
-
-const save = vi.fn().mockResolvedValue(true);
-
-function renderSection(over: Partial<Project> = {}, disabled = false) {
-  return render(
-    <RuntimeSection
-      project={{ ...baseProject, ...over }}
-      save={save}
-      disabled={disabled}
-      disabledReason="Container must be stopped to change this setting."
-    />,
-  );
-}
-
-describe("RuntimeSection — VPN support toggle", () => {
-  beforeEach(() => vi.clearAllMocks());
-
-  it("saves only the VPN flag when switched on", () => {
-    renderSection();
-    fireEvent.click(screen.getByRole("switch", { name: VPN }));
-    expect(save).toHaveBeenCalledWith({ vpn_support_enabled: true });
-  });
-
-  it("saves the flag off again, rather than dropping the key", () => {
-    // Off has to be written explicitly: the container carries a
-    // `triple-c.vpn-support` label either way, and an absent value would leave
-    // the capability granted.
-    renderSection({ vpn_support_enabled: true });
-    fireEvent.click(screen.getByRole("switch", { name: VPN }));
-    expect(save).toHaveBeenCalledWith({ vpn_support_enabled: false });
-  });
-
-  it("reflects the project's current state", () => {
-    renderSection({ vpn_support_enabled: true });
-    expect(screen.getByRole("switch", { name: VPN })).toBeChecked();
-  });
-
-  it("cannot be changed while the container is running", () => {
-    // Capabilities and devices are fixed at creation, so this setting is gated
-    // on the container being stopped along with the rest of the tab.
-    renderSection({}, true);
-    const toggle = screen.getByRole("switch", { name: VPN });
-    expect(toggle).toBeDisabled();
-    fireEvent.click(toggle);
-    expect(save).not.toHaveBeenCalled();
-  });
-
-  it("warns that the change recreates the container", () => {
-    renderSection();
-    expect(
-      screen.getByText(/recreates the container on its next start/i),
-    ).toBeInTheDocument();
-  });
-});

app/src/components/projects/home/config/RuntimeSection.tsx

@@ -59,7 +59,7 @@ export default function RuntimeSection({
 
         <SwitchRow
           label="VPN support"
-          hint="Grants NET_ADMIN and the /dev/net/tun device so a VPN client (PIA, WireGuard, OpenVPN) can build a tunnel inside the container. Without it a client installs and runs but its connection hangs until it times out. Anything in the container can then reconfigure the container's own network stack; the host's is untouched. Changing this recreates the container on its next start — the home and .claude volumes are preserved."
+          hint="Grants NET_ADMIN and the /dev/net/tun device so a VPN client (PIA, WireGuard, OpenVPN, Tailscale) can build a tunnel inside the container. Without it a client installs and runs but its connection hangs until it times out. Anything in the container can then reconfigure the container's own network stack; the host's is untouched."
           control={
             <Toggle
               label="VPN support"