Merge pull request 'Read a stopped container instead of claiming there is nothing to read' (#55) from fix/staleness-probe-stopped-container into main

Six findings, all real. The one that mattered: `getContainerStaleness` is
called from a `useEffect` that fires whenever the container settles, so
merely opening a stopped project's Overview now committed its whole writable
layer — 44 s on a real project, against ~3 s for the snapshot probe it
replaced. Shipping that would have traded one bad banner for a bad page.

A stopped container's writable layer cannot change, so the probe is exactly
cacheable: `STOPPED_MANIFEST_CACHE` keys on the container's `FinishedAt`,
which moves on every stop. Cold 2967 ms, warm 1 ms, measured. A live test
asserts the restart case as well as the hit, because a cache that failed to
invalidate would plan a migration against a filesystem the project no longer
has — verified by breaking the token and watching that assertion fail.

Skipping the probe for projects that are not stale looked like the cheaper
fix and is unsafe: the deltas would be empty while `probeSettled` stayed
true, and the migrate action in the project menu is not gated on the banner,
so the pre-flight would report nothing to copy while the backend was told to
copy nothing. That is the hazard `canMigrate`'s comment already warns about.
Not done, and written down so it is not tried again.

Also from the review:

- A failed commit no longer costs an answer the snapshot could have given.
  Before this feature a stopped project read its snapshot directly, so
  surfacing this error would have made the banner worse than it was — and
  the failure modes are where the fallback earns its keep: a full disk (the
  commit allocates the whole layer, the snapshot probe allocates nothing)
  and a 409 from a concurrent claim.
- The probe no longer commits while the project is claimed. The collision is
  not symmetric: the probe losing is a retryable `probe_error`, but
  `start_project_container` removes the old container with a hard `?`, so a
  remove that raced a commit would fail the user's Start with an opaque
  error. `stopped_probe_policy` reads `project_lock::held` and probes the
  snapshot instead, or defers with a message that says so.
- The cleanup-failure warning claimed the next probe of the same container
  would reclaim the leftover. Unique names made that false the moment they
  landed; it is `reap_probe_images` that collects it.
- The TS binding still called the command read-only, which is how the
  auto-refresh got added in the first place.
- CLAUDE.md still documented the stable `triple-c-probe-{cid}:latest` name
  this PR removed as unsafe.

548 unit tests, 752 frontend tests, 4 live-Docker tests. Clippy unchanged at
44 warnings.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019RSaoDLovVV2wmH4H8VVxz

.gitea/workflows/build.yml

@@ -28,6 +28,27 @@ jobs:
 
       - name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3
+        with:
+          # Put BuildKit in the host's network namespace so it can reach
+          # act_runner's cache service.
+          #
+          # The `docker-container` driver — which the multi-arch build below
+          # requires, since the plain `docker` driver cannot do
+          # linux/amd64+linux/arm64 — runs BuildKit in its *own* container on
+          # Docker's default bridge. act_runner advertises ACTIONS_CACHE_URL as
+          # an address the *job* container can reach, and nothing teaches the
+          # BuildKit container about it: the job could reach
+          # 192.168.1.126:40649 while the container actually making the request
+          # could not, and the build died with `no route to host`.
+          #
+          # `no route to host` is EHOSTUNREACH — a firewall rejecting, not a
+          # missing route (a wrong address times out instead) — which is what a
+          # default firewalld zone does to traffic arriving from the docker
+          # bridge. Sharing the host's namespace sidesteps the question
+          # entirely: the cache address becomes local to BuildKit.
+          #
+          # No effect on runners where this already worked.
+          driver-opts: network=host
 
       - name: Login to Gitea Container Registry
         uses: docker/login-action@v3
@@ -55,5 +76,21 @@ jobs:
             ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}:${{ gitea.sha }}
             ghcr.io/shadowdao/triple-c-sandbox:latest
             ghcr.io/shadowdao/triple-c-sandbox:${{ gitea.sha }}
+          # `ignore-error` is what stops a cache failure failing a build that
+          # already succeeded. act_runner emulates the GitHub Actions cache
+          # service on the runner host's LAN address, and the `docker-container`
+          # builder `setup-buildx-action` creates could not route to it —
+          # every layer of both arches built, then the job died on
+          # `GetCacheEntryDownloadURL: no route to host` while exporting.
+          #
+          # On a pull_request `push:` above is false, so this job pushes
+          # nothing and the cache is its only output: failing it discarded a
+          # complete, successful validation of the Dockerfile for both
+          # architectures. A cache is an optimisation and must degrade to
+          # "slow", never to "red".
+          #
+          # The import is already non-fatal — the build ran all 37 layers after
+          # warning that it could not read the cache — so only the exporter
+          # needs the flag.
           cache-from: type=gha
-          cache-to: type=gha,mode=max
+          cache-to: type=gha,mode=max,ignore-error=true

CLAUDE.md

@@ -413,6 +413,26 @@ container is created once by a very long function where a dropped capability is
   existing toggle: the label fingerprints *the setting*, not the set of things the setting drives,
   so a project already at `true` gets no recreation at all on upgrade.
 
+### Keeping Claude Code current
+
+`claude update` runs in **two** places, and both are needed:
+
+- `container/entrypoint.sh` runs it once per container start, before any session exists.
+- `commands/terminal_commands.rs` (and its twin in `web_terminal/ws_handler.rs`) prepend it to the
+  command every Claude session launches with, because containers use a stop/start model and a
+  long-lived one would otherwise never re-check.
+
+Both are `timeout`-bounded and `|| echo`'d, so an offline or slow network delays a tab rather than
+failing it, and **both take the same `flock` on `/tmp/.triple-c-claude-update.lock`**. That lock is
+not tidiness: the entrypoint prints "container ready" only after its own update finishes, so
+starting a project and immediately opening a tab — or opening two tabs at once — otherwise runs two
+updaters against the same `~/.claude/bin`, and `|| echo` would hide a half-written install behind a
+friendly message one line before `exec claude` ran it. `-E 0` makes losing the race a success,
+because the holder just did the work. The per-session copy is what forced the non-Bedrock path from a bare `["claude", ...]`
+argv into a `bash -c` wrapper — the flags and the session name are interpolated into a shell
+string now, so **anything added there must go through `shell_quote_arg`**. Bash sessions are
+deliberately untouched.
+
 ### Container Lifecycle
 
 Containers use a **stop/start** model (not create/destroy). Installed packages persist across stops. The `.claude` config dir uses a named Docker volume (`triple-c-claude-config-{projectId}`), nested inside the home volume (`triple-c-home-{projectId}`), so OAuth tokens and Claude Code config survive container stop/start *and* container recreation.
@@ -436,6 +456,63 @@ security update. Migration is the non-destructive way out; Reset is the destruct
   bump: churn on the old base, and it would consume the "you should migrate" signal without
   migrating. `get_container_staleness` surfaces it; `migrate_project_to_base` acts on it.
 - **A missing lineage label means "unknown, probe instead", never "stale".**
+- **The snapshot image is not a checkpoint — never read its absence as "nothing to inspect".**
+  `commit_container_snapshot` runs only before a container is destroyed (a config-change recreate)
+  or inside a migration. **Never on stop.** So a project in daily use for a year can legitimately
+  have no `triple-c-snapshot-{id}:latest` at all, and one that has is stale by everything installed
+  since. `pick_probe_source` therefore reads a *stopped* container directly — commit its writable
+  layer to a unique `triple-c-probe-*` image, probe that, drop it — and ranks it **above** the snapshot,
+  for the same reason a running container already outranked it. Assuming a snapshot existed is what
+  made a stopped, never-recreated project report "no container or snapshot image yet" with its
+  container sitting right there, and left Update disabled on the projects furthest behind.
+- **`bollard` never gives you the image id back from a commit.** Its `Commit` response model
+  deserialises `"ID"`; the daemon sends `"Id"`, so `commit_container` returns `id: None` every time
+  (verified: bollard 0.18.1, Engine 29.6). Neither long-standing commit site notices because both
+  discard the response — but it means any commit you need a *reference* to has to be **tagged**.
+- **A tagged leftover is the one orphan no sweep can reach, so the probe image has its own reaper.**
+  `sweep_orphaned_snapshots` collects `dangling` + `triple-c.managed=true`; `reap_stale_migration_pins`
+  and `scrub_secrets_from_snapshots` both filter `triple-c-snapshot-*`. A `triple-c-probe-*` image is
+  tagged and so matches none of them, which would make a crashed probe a permanent multi-gigabyte
+  leak with no UI to find it. `reap_probe_images` runs at startup beside `reap_probe_containers` and
+  is **load-bearing, not tidying** — it is also what makes the probe image's unscrubbed writable
+  layer acceptable. Two rules it earned the hard way:
+  - **Age-gate it** (`PROBE_REAP_MIN_AGE_SECS`, same as the container reaper). `reference=` is
+    daemon-wide, so a second copy of the app has live probe images matching the glob.
+  - **Remove by tag, never by image id.** A `force` removal by id untags an image *everywhere*; a
+    fixture that tagged `alpine:latest` into this namespace deleted the user's alpine that way.
+- **Probe image names are unique per call, and must stay that way.** A stable per-container name was
+  tried: container ids do not survive a recreate, so most leftovers were stranded permanently, and
+  two concurrent probes fought over one tag — whichever finished first force-removed the image the
+  other was still reading, reporting a bogus `probe_error` on a healthy project. `get_container_staleness`
+  takes no `project_lock` claim (the migration banner needs it to answer *during* a migration), so
+  uniqueness is what makes overlapping probes safe.
+- **The stopped-container probe is cached per stop, and that is not an optimisation you may drop.**
+  `getContainerStaleness` is called from a `useEffect` that fires whenever the container settles, so
+  merely opening a stopped project's Overview probes it. Uncached that is a `docker commit` of the
+  whole writable layer per visit — measured at 44 s on a real project, against ~3 s for the snapshot
+  probe it replaced. `STOPPED_MANIFEST_CACHE` is keyed on the container's `FinishedAt`, which is
+  exact rather than merely plausible: nothing can write to a stopped container's writable layer, and
+  `FinishedAt` moves on every stop. A live test asserts the restart case, because a cache that
+  failed to invalidate would plan a migration against a filesystem the project no longer has.
+- **Do not "skip the probe when the project is not stale" to save that cost.** It was tried. The
+  deltas would be empty while `probeSettled` (`!probing && staleness && !probe_error`) stayed *true*,
+  which leaves the migrate action in the project menu enabled — that action is not gated on the
+  banner — so the pre-flight would report nothing to copy while the backend was told to copy
+  nothing. That is the exact hazard `ProjectHome.tsx`'s `canMigrate` comment already warns about.
+- **A failed stopped-container probe falls back to the snapshot whenever one exists.** Before this
+  feature a stopped project read its snapshot directly, so surfacing a commit failure where the
+  snapshot could have answered would make the banner *worse* than it was — and the failure modes are
+  exactly the ones where the fallback earns its keep: a full disk (the commit allocates the whole
+  writable layer; the snapshot probe allocates nothing) and a 409 from a concurrent claim.
+- **`get_container_staleness` never commits while the project is claimed.** It takes no
+  `project_lock` claim itself, deliberately — the banner has to answer *during* a migration — so it
+  reads `project_lock::held` instead and probes the snapshot rather than the container. The
+  collision is not symmetric: the probe losing is a retryable `probe_error`, but
+  `start_project_container` removes the old container with a hard `?`, so a remove that raced a
+  commit would fail the user's Start with an opaque error.
+- **An image's `Created` is the image's own, not its tag's.** Tagging an existing image gives you
+  that image's age; BuildKit stamps `docker build` output with a fixed epoch. Only `docker commit`
+  stamps *now* — which is what real probe images do, and what any fixture for them must do.
 - **`:latest` keeps pointing at the old lineage until the final commit.** That is what makes every
   crash before that point self-heal — `start_project_container` just recreates from the old
   snapshot. After the container swap, the new container's `triple-c.migration-state=in-progress`

HOW-TO-USE.md

@@ -243,7 +243,7 @@ Anthropic-backend project uses that token without its own login. See
 │             │  │                                                  │  │
 │             │  └──────────────────────────────────────────────────┘  │
 ├─────────────┴────────────────────────────────────────────────────────┤
-│  2 project(s) · 1 running · 2 terminal(s)          Jump to Current ↓ │
+│  2 project(s) · 1 running · 2 terminal(s)                      Notes │
 └──────────────────────────────────────────────────────────────────────┘
 ```
 
@@ -268,8 +268,8 @@ Anthropic-backend project uses that token without its own login. See
 - **Main area** — Shows the active tab: a Project Home view or an xterm.js terminal. With no tabs
   open you get a welcome screen with Docker/image/project readiness checks.
 - **StatusBar** — Counts of total projects, running containers and open terminal sessions; the
-  **Jump to Current ↓** button when a terminal is scrolled up; and the microphone button when
-  speech-to-text is enabled.
+  **🖱 Mouse captured — release** button while a program in the terminal is holding the mouse; the
+  **Notes** toggle; and the microphone button when speech-to-text is enabled.
 
 ---
 
@@ -1224,9 +1224,31 @@ Programs inside the container can copy text to your host clipboard. When a conta
 
 You can paste images from your clipboard into the terminal (Ctrl+V / Cmd+V). The image is uploaded to the container as `/tmp/clipboard_<timestamp>.png` and the file path is injected into the terminal input so Claude Code can reference it. A toast notification confirms the upload.
 
-### Jump to Current
+### Scrolling
 
-When you scroll up in the terminal to review previous output, a **Jump to Current** button appears in the bottom-right corner. Click it to scroll back to the latest output.
+Scrolling is the terminal's own: scroll up to read back and it holds position, scroll to the
+bottom and it follows new output again. There is no follow toggle — an earlier **Following /
+Paused** control and a **Jump to Current** button were retired once they stopped doing anything
+useful, because Claude Code draws its interface on the alternate screen, which has no scrollback
+for them to act on.
+
+### When the mouse stops working
+
+Some programs ask the terminal for the mouse, so that clicks and drags go to the program instead
+of selecting text. If one of them exits without handing the mouse back, the terminal looks stuck:
+you cannot select text, and stray characters can appear as you move the pointer.
+
+A **🖱 Mouse captured — release** button appears in the status bar whenever a program holds the
+mouse. Click it, or press **Ctrl+Shift+X**, to take the mouse back. Nothing is sent into the
+container — only the terminal's own state is reset.
+
+Note that holding the mouse is normal for programs like `htop`, `vim` and Claude Code itself, so
+the button is showing most of the time you are in one. It is there for when a program exits
+without handing the mouse back and the terminal is left stuck; releasing while a program is still
+running just takes the mouse away from that program.
+
+To select text *without* taking the mouse back, hold **Shift** while dragging — or **Option** on
+macOS.
 
 ### Files
 

README.md

@@ -528,7 +528,7 @@ Triple-C includes optional speech-to-text powered by [Faster Whisper](https://gi
 | `app/src/components/layout/TopBar.tsx` | Hosts MainTabs + Docker/Image status indicators + Help |
 | `app/src/components/layout/MainTabs.tsx` | The single main-area tab strip (Project Home + terminal tabs), pointer-event drag reordering |
 | `app/src/components/layout/Sidebar.tsx` | Responsive sidebar (25% width, min 224px, max 320px), collapsible to an icon rail |
-| `app/src/components/layout/StatusBar.tsx` | Project/terminal counts, Jump to Current, STT mic |
+| `app/src/components/layout/StatusBar.tsx` | Project/terminal counts, Notes toggle, STT mic |
 | `app/src/components/projects/ProjectRow.tsx` | Select-only sidebar row; opens Project Home, with hover start/stop and terminal controls |
 | `app/src/components/projects/ProjectList.tsx` | Project list in sidebar |
 | `app/src/components/projects/PermissionModeControl.tsx` | Plan / Default / Accept Edits / Bypass segmented control |

ROADMAP.md

@@ -58,7 +58,7 @@ choice it never asked about.
 
 Also covered: per-project auth backends (Anthropic OAuth, Bedrock incl. SSO refresh,
 Ollama, OpenAI-compatible), user-level `CLAUDE.md` composition, `claude update` on every
-container start, terminal ergonomics (OAuth URL detection, OSC 52 clipboard, image paste,
+container start *and* before every Claude session launches, terminal ergonomics (OAuth URL detection, OSC 52 clipboard, image paste,
 file drag-drop, STT), the web terminal, and workspace backup.
 
 ---

TECHNICAL.md

@@ -62,10 +62,13 @@ Tauri uses a Rust backend paired with a web-based frontend rendered by the OS-na
 Implementation gotchas for the terminal view and its global controls (merged in PR #7, `terminal-layout-statusbar`):
 
 - **xterm padding lives on a wrapper, never the host.** FitAddon measures the same element that `term.open()` mounts into, so any padding on that host element makes the grid overhang and clip its rightmost column / bottom row. Padding must live on a **wrapper `div`**; the xterm host fills it with no padding of its own. Do not reintroduce padding on the host element in `TerminalView.tsx`.
-- **STT mic and "Jump to Current" live in the global `StatusBar`, not per-terminal overlays.** There is a single `useSTT` instance in `App.tsx` bound to the active session. `Ctrl+Shift+M` routes through the Zustand store (`sttToggle`).
+- **The STT mic lives in the global `StatusBar`, not a per-terminal overlay.** There is a single `useSTT` instance in `App.tsx` bound to the active session. `Ctrl+Shift+M` routes through the Zustand store (`sttToggle`).
 - **Recording is pinned to where it started.** The STT transcript targets `recordingSessionIdRef` (the session recording began in), **not** the live active session — switching tabs mid-recording must not misroute the transcript.
-- **"Jump to Current" state is written only by the active terminal.** The active `TerminalView` surfaces `terminalAtBottom` and `scrollActiveToBottom` through the store; only the active terminal writes them, and they are cleared on its unmount.
-- **Set store function values via object-merge, not the updater form** — `set({ fn: value })`, not `set(state => ...)` — when publishing action callbacks (like `scrollActiveToBottom`) into the Zustand store.
+- **Scrolling is left to xterm, and the "Following" / "Jump to Current" controls that used to drive it are gone.** They were built for the normal buffer. Claude Code draws on the *alternate* screen, which has no scrollback, so in a Claude tab `viewportY` always equalled `baseY`, `isAtBottom` was permanently true and neither control could ever do anything — which is what made them look broken. **They did still work in `bash` tabs**, which run `bash -l` on the normal buffer; removing them is a real behaviour change there, and the justification is that xterm's native follow already covers it, not that nothing was lost. The manual `scrollToBottom()` on every write went with them — it fought that native behaviour, which follows the tail while the viewport is at the bottom and holds position while you read further up. `scrollToBottom()` remains only on activate and after a refit, and **both sample `viewportY >= baseY` before the `fit()`** so they re-anchor only a viewport that was already on the tail: the ResizeObserver fires for the Notes dock, the sidebar drag and any window resize, none of which are a reason to yank a reader to the bottom.
+- **A program that grabs the mouse and dies must be escapable without closing the tab.** A TUI sets DECSET `?1000`/`?1002`/`?1003` and, if it exits without resetting them, xterm keeps routing clicks, drags and (under `?1003`) every pointer *move* to the PTY — text selection dies and escape bytes flood the prompt. `TerminalView` reconciles a badge against `term.modes.mouseTrackingMode` **in the `term.write()` callback**: the mode only changes because the container printed a sequence, so one check per write catches every transition with no polling. Releasing writes the resets through `term.write`, **never `sendInput`** — the reset belongs to xterm's parser and must not reach the container, or a still-live TUI would simply re-grab the mouse on its next repaint. Bound to the control and to `Ctrl+Shift+X`, because the failure being recovered from is the pointer not working.
+- **The release control lives in the `StatusBar`, not over the terminal.** Mouse tracking is the *normal* steady state of every mouse-driven TUI — htop, vim, lazygit and Claude Code all set `?1000`/`?1002` — so a badge painted at `absolute top-2 right-4 z-50` would be on screen for the entire life of those programs and would swallow clicks aimed at that program's own top-right corner, silently killing its mouse with no undo. The active `TerminalView` publishes `terminalMouseCaptured` and `releaseActiveMouse` through the store instead, the same way `terminalHasSelection` and `sttToggle` already do.
+- **`macOptionClickForcesSelection: true` is set, and without it macOS has no force-select at all.** `SelectionService.shouldForceSelection` is `isMac ? altKey && macOptionClickForcesSelection : shiftKey`, and the option defaults to `false` — so the "hold Shift to select while a program holds the mouse" escape hatch is Shift everywhere else and **Option** on macOS, and existed on macOS only once this was turned on.
+- **Set store function values via object-merge, not the updater form** — `set({ fn: value })`, not `set(state => ...)` — when publishing action callbacks (like `sttToggle`) into the Zustand store.
 
 ### bollard (Docker API)
 

app/src-tauri/src/commands/migration_commands.rs

@@ -92,8 +92,111 @@ fn pick_recorded_lineage(
         .or_else(|| from_snapshot.filter(|v| !v.is_empty()))
 }
 
-/// Read-only. Runs two filesystem probes (~3 s each) and is therefore meant to
-/// be called on demand, not polled.
+/// Reported as `probe_error` when there is genuinely nothing to read: no
+/// container, stopped or otherwise, and no snapshot image.
+///
+/// It used to be reported for a *stopped* container too, which was simply
+/// untrue — the container was sitting right there — and it disabled Update on
+/// exactly the long-lived projects that had never been recreated and so had no
+/// snapshot to fall back on.
+const NOTHING_TO_PROBE: &str = "This project has no container or snapshot image yet, so there is nothing to compare against the base image.";
+
+/// Where [`get_container_staleness`] reads the project's *current* filesystem
+/// from, in descending order of how current the answer is.
+#[derive(Debug, PartialEq, Eq)]
+enum ProbeSource {
+    /// `docker exec` into the live container. The only source that includes
+    /// everything installed since the last commit *in this session*.
+    RunningContainer,
+    /// Commit the stopped container's writable layer to a throwaway image and
+    /// probe that. Exactly as current as the container, which is what makes it
+    /// preferable to the snapshot — see below.
+    StoppedContainer,
+    /// A throwaway container from `triple-c-snapshot-<id>:latest`.
+    Snapshot,
+    /// Nothing to read: no container, no snapshot.
+    Nothing,
+}
+
+/// Pick the probe source. `container_running` is `None` when the project has no
+/// container at all, `Some(false)` when it has a stopped one.
+///
+/// **A stopped container outranks the snapshot.** The snapshot image is not a
+/// checkpoint — `commit_container_snapshot` runs only before a removal (a
+/// config-change recreate) or inside a migration, so a project that has never
+/// hit either has *no snapshot at all*, however long it has been in use, and
+/// one that has is stale by everything installed since. The container's
+/// writable layer is the truth in both cases. This is the same argument
+/// [`mig::manifest_from_container`] already makes for the running case; it does
+/// not stop applying when the container is stopped.
+///
+/// Getting this wrong is what made a stopped, never-recreated project report
+/// "no container or snapshot image yet" — with its container sitting right
+/// there — and left Update disabled on the projects that most needed it.
+fn pick_probe_source(container_running: Option<bool>, snapshot_exists: bool) -> ProbeSource {
+    match (container_running, snapshot_exists) {
+        (Some(true), _) => ProbeSource::RunningContainer,
+        (Some(false), _) => ProbeSource::StoppedContainer,
+        (None, true) => ProbeSource::Snapshot,
+        (None, false) => ProbeSource::Nothing,
+    }
+}
+
+/// Reported as `probe_error` when another operation owns the project and there
+/// is no snapshot image to read instead. Deliberately not a claim about the
+/// container: nothing is wrong with it, the answer is simply not safe to take
+/// right now. See [`stopped_probe_policy`].
+const PROJECT_BUSY: &str = "Another operation is running on this project, so its contents could not be inspected. Try again once it finishes.";
+
+/// What to do about a stopped container, whose probe is the expensive one: it
+/// commits the writable layer before it can read anything.
+#[derive(Debug, PartialEq, Eq)]
+enum StoppedProbe {
+    /// Commit and probe. The current answer, and the default.
+    Commit,
+    /// Probe the snapshot image instead. Less current — it lags the container by
+    /// everything installed since the last commit — but it allocates nothing and
+    /// touches nothing, which is what makes it the right answer while another
+    /// operation owns the container.
+    SnapshotInstead,
+    /// Report rather than guess.
+    Defer,
+}
+
+/// Pick what to do about a stopped container.
+///
+/// **Never commits while the project is claimed.** `get_container_staleness`
+/// takes no [`crate::project_lock`] claim of its own, by design, so a commit
+/// here can overlap a Recreate or Reset — and the collision is not symmetric.
+/// The probe losing is harmless: a surfaced `probe_error` the user retries. The
+/// *recreate* losing is not, because `start_project_container` removes the old
+/// container with a hard `?`, so a non-404 from a remove that raced this commit
+/// fails the whole Start with an opaque "Failed to remove container". Reading
+/// the claim costs nothing and takes that failure off the table.
+fn stopped_probe_policy(project_is_busy: bool, snapshot_exists: bool) -> StoppedProbe {
+    match (project_is_busy, snapshot_exists) {
+        (false, _) => StoppedProbe::Commit,
+        (true, true) => StoppedProbe::SnapshotInstead,
+        (true, false) => StoppedProbe::Defer,
+    }
+}
+
+/// Runs two filesystem probes (~3 s each) and is therefore meant to be called
+/// on demand, not polled.
+///
+/// **Not read-only, despite only reporting.** The stopped-container path commits
+/// a throwaway image and force-removes it, which makes this a writer of a
+/// `triple-c-probe-*` image and puts it in the class of thing
+/// [`crate::project_lock`] exists for — and it takes no claim. That is
+/// deliberate: this is what the migration banner calls to decide whether to
+/// offer an update, including while a migration is in flight, so refusing it
+/// under a claim would blank the banner exactly when it has the most to say.
+/// The exposure is bounded to a surfaced error — a concurrent Recreate, Reset or
+/// migration can remove the container out from under the commit, and the result
+/// is a `probe_error` the user can retry, never a damaged container or a
+/// mislabelled image. Two overlapping probes cannot collide either, because
+/// probe image names are unique per call; see
+/// [`crate::docker::container::get_probe_image_name`].
 #[tauri::command]
 pub async fn get_container_staleness(
     project_id: String,
@@ -145,16 +248,62 @@ pub async fn get_container_staleness(
     };
 
     // ── Probes ───────────────────────────────────────────────────────────
-    let running = match &container_id {
-        Some(id) => docker::is_container_running(id).await.unwrap_or(false),
-        None => false,
+    let container_running = match &container_id {
+        Some(id) => Some(docker::is_container_running(id).await.unwrap_or(false)),
+        None => None,
     };
-    let from_manifest = if running {
-        mig::manifest_from_container(container_id.as_ref().unwrap()).await
-    } else if docker::image_exists(&snapshot_image).await.unwrap_or(false) {
-        mig::manifest_from_image(&snapshot_image).await
-    } else {
-        Err("This project has no container or snapshot image yet, so there is nothing to compare against the base image.".to_string())
+    let snapshot_exists = docker::image_exists(&snapshot_image).await.unwrap_or(false);
+    let from_manifest = match (
+        pick_probe_source(container_running, snapshot_exists),
+        &container_id,
+    ) {
+        (ProbeSource::RunningContainer, Some(id)) => mig::manifest_from_container(id).await,
+        (ProbeSource::StoppedContainer, Some(id)) => {
+            let busy = crate::project_lock::held(&project_id).is_some();
+            match stopped_probe_policy(busy, snapshot_exists) {
+                StoppedProbe::Commit => {
+                    match mig::manifest_from_stopped_container_cached(id).await {
+                        Ok(m) => Ok(m),
+                        // **Never let a failed commit cost an answer the
+                        // snapshot could have given.** Before stopped
+                        // containers were readable at all, a stopped project
+                        // fell straight through to its snapshot, so surfacing
+                        // this error where the snapshot exists would make the
+                        // banner *worse* than it was — and the ways this fails
+                        // are the ones where the fallback matters most: a full
+                        // disk (the commit has to allocate the whole writable
+                        // layer; the snapshot probe allocates nothing) and a
+                        // 409 from an operation that claimed the project after
+                        // the check above.
+                        Err(e) if snapshot_exists => {
+                            log::warn!(
+                                "Probing the stopped container for project {} failed ({}) — \
+                                 falling back to its snapshot image, which may lag it",
+                                project_id,
+                                e
+                            );
+                            mig::manifest_from_image(&snapshot_image).await
+                        }
+                        Err(e) => Err(e),
+                    }
+                }
+                StoppedProbe::SnapshotInstead => {
+                    log::info!(
+                        "Project {} is claimed by another operation — probing its snapshot image \
+                         rather than committing the container",
+                        project_id
+                    );
+                    mig::manifest_from_image(&snapshot_image).await
+                }
+                StoppedProbe::Defer => Err(PROJECT_BUSY.to_string()),
+            }
+        }
+        (ProbeSource::Snapshot, _) => mig::manifest_from_image(&snapshot_image).await,
+        // `container_running` is `Some` exactly when `container_id` is, so the
+        // two arms above are the only ones those variants can reach. This arm
+        // is `ProbeSource::Nothing` — and now *only* that: it used to also
+        // swallow every stopped container, which is the bug.
+        (_, _) => Err(NOTHING_TO_PROBE.to_string()),
     };
 
     let (from_manifest, base_manifest) = match from_manifest {
@@ -1964,6 +2113,59 @@ mod tests {
         assert_eq!(pick_recorded_lineage(some(""), None), None);
     }
 
+    #[test]
+    fn a_stopped_container_is_probed_rather_than_reported_missing() {
+        // The regression: a container that exists but is stopped, with no
+        // snapshot ever taken, read as "nothing to compare against".
+        assert_eq!(
+            pick_probe_source(Some(false), false),
+            ProbeSource::StoppedContainer
+        );
+    }
+
+    #[test]
+    fn the_container_outranks_the_snapshot_whether_or_not_it_is_running() {
+        // The snapshot lags the container by everything installed since the
+        // last commit, in both states.
+        assert_eq!(
+            pick_probe_source(Some(true), true),
+            ProbeSource::RunningContainer
+        );
+        assert_eq!(
+            pick_probe_source(Some(false), true),
+            ProbeSource::StoppedContainer
+        );
+    }
+
+    #[test]
+    fn the_snapshot_is_the_fallback_only_once_the_container_is_gone() {
+        assert_eq!(pick_probe_source(None, true), ProbeSource::Snapshot);
+    }
+
+    #[test]
+    fn nothing_to_probe_is_reserved_for_no_container_and_no_snapshot() {
+        // The one case the "no container or snapshot image yet" message may
+        // still describe.
+        assert_eq!(pick_probe_source(None, false), ProbeSource::Nothing);
+    }
+
+    #[test]
+    fn a_stopped_container_is_committed_only_when_nothing_else_owns_the_project() {
+        assert_eq!(stopped_probe_policy(false, false), StoppedProbe::Commit);
+        assert_eq!(stopped_probe_policy(false, true), StoppedProbe::Commit);
+    }
+
+    #[test]
+    fn a_busy_project_falls_back_rather_than_racing_a_recreate() {
+        // The snapshot lags, but a stale answer beats failing someone's Start.
+        assert_eq!(
+            stopped_probe_policy(true, true),
+            StoppedProbe::SnapshotInstead
+        );
+        // Nothing to fall back to: say so instead of committing anyway.
+        assert_eq!(stopped_probe_policy(true, false), StoppedProbe::Defer);
+    }
+
     #[test]
     fn byte_sizes_read_the_way_a_disk_warning_should() {
         assert_eq!(human_bytes(512), "512 B");

app/src-tauri/src/commands/terminal_commands.rs

@@ -6,10 +6,58 @@ use crate::AppState;
 
 /// Build the command to run in the container terminal.
 ///
-/// For Bedrock Profile projects, wraps `claude` in a bash script that validates
-/// the AWS session first. If the SSO session is expired, runs `aws sso login`
-/// so the user can re-authenticate (the URL is clickable via xterm.js WebLinksAddon).
+/// Always a `bash -c` script, because every session runs [`UPDATE_PRELUDE`]
+/// before `exec claude`. For Bedrock Profile projects the script additionally
+/// validates the AWS session first, and runs `aws sso login` if it has expired
+/// so the user can re-authenticate (the URL is clickable via xterm.js
+/// WebLinksAddon).
 fn build_terminal_cmd(project: &Project, state: &AppState, session_name: Option<&str>) -> Vec<String> {
+    let settings = state.settings_store.get();
+    build_claude_terminal_cmd(
+        project,
+        settings.global_aws.aws_profile.as_deref(),
+        session_name,
+    )
+}
+
+/// Shell line run immediately before `exec claude` in every Claude terminal
+/// session.
+///
+/// `container/entrypoint.sh` already runs `claude update` when the container
+/// starts, but containers here use a stop/start (and often just keep running)
+/// model, so a long-lived container's CLI goes stale between restarts. Running
+/// it per session is what keeps a week-old container current.
+///
+/// Deliberately non-fatal and time-bounded: `|| echo` swallows a failure (no
+/// network, npm registry down) so a session always opens, and `timeout 60`
+/// bounds how long a user waits for a terminal.
+///
+/// **`flock` is load-bearing, not tidiness.** Nothing serialises this against
+/// the entrypoint's own `claude update`, and the entrypoint prints "container
+/// ready" only *after* its copy finishes — so "start the project, open a tab"
+/// races two updaters against the same `~/.claude/bin` install, as does
+/// opening two tabs at once. `|| echo` would then hide a half-written install
+/// behind a friendly message and the very next line (`exec claude`) would run
+/// it. `-w 90` gives the entrypoint's `timeout 120` copy room to finish rather
+/// than failing the wait, and `-E 0` makes losing the race a success: the
+/// other holder just updated, so there is nothing left to do.
+pub(crate) const UPDATE_PRELUDE: &str = concat!(
+    "flock -w 90 -E 0 /tmp/.triple-c-claude-update.lock ",
+    r#"timeout 60 claude update 2>&1 || echo "(update skipped — continuing)""#,
+);
+
+/// Single-quote one argument for interpolation into a shell script string.
+fn shell_quote_arg(arg: &str) -> String {
+    format!(" '{}'", arg.replace('\'', "'\\''"))
+}
+
+/// The testable core of [`build_terminal_cmd`], taking the resolved global AWS
+/// profile rather than the whole [`AppState`].
+fn build_claude_terminal_cmd(
+    project: &Project,
+    global_aws_profile: Option<&str>,
+    session_name: Option<&str>,
+) -> Vec<String> {
     let is_bedrock_profile = project.backend == Backend::Bedrock
         && project
             .bedrock_config
@@ -19,36 +67,27 @@ fn build_terminal_cmd(project: &Project, state: &AppState, session_name: Option<
 
     let permission_args = project.effective_permission_mode().cli_args();
 
+    // The args are interpolated into a shell script string, so single-quote
+    // each one.
+    let name_flag = session_name
+        .filter(|n| !n.is_empty())
+        .map(|n| format!(" -n{}", shell_quote_arg(n)))
+        .unwrap_or_default();
+    let permission_flags: String = permission_args.iter().map(|a| shell_quote_arg(a)).collect();
+    let claude_cmd = format!("exec claude{}{}", permission_flags, name_flag);
+
     if !is_bedrock_profile {
-        let mut cmd = vec!["claude".to_string()];
-        cmd.extend(permission_args);
-        if let Some(name) = session_name {
-            if !name.is_empty() {
-                cmd.push("-n".to_string());
-                cmd.push(name.to_string());
-            }
-        }
-        return cmd;
+        return vec![
+            "bash".to_string(),
+            "-c".to_string(),
+            format!("{}\n{}\n", UPDATE_PRELUDE, claude_cmd),
+        ];
     }
 
-    let profile = aws_commands::resolve_profile_for_project(
-        project,
-        state.settings_store.get().global_aws.aws_profile.as_deref(),
-    );
+    let profile = aws_commands::resolve_profile_for_project(project, global_aws_profile);
 
     // Build a bash wrapper that validates credentials, re-auths if needed,
     // then exec's into claude.
-    let name_flag = session_name
-        .filter(|n| !n.is_empty())
-        .map(|n| format!(" -n '{}'", n.replace('\'', "'\\''")))
-        .unwrap_or_default();
-    // The args are interpolated into a shell script string, so single-quote
-    // each one (same escaping style as name_flag above).
-    let permission_flags: String = permission_args
-        .iter()
-        .map(|a| format!(" '{}'", a.replace('\'', "'\\''")))
-        .collect();
-    let claude_cmd = format!("exec claude{}{}", permission_flags, name_flag);
 
     let script = format!(
         r#"
@@ -75,9 +114,11 @@ else
         echo ""
     fi
 fi
+{update_prelude}
 {claude_cmd}
 "#,
         profile = profile,
+        update_prelude = UPDATE_PRELUDE,
         claude_cmd = claude_cmd
     );
 
@@ -325,6 +366,9 @@ pub async fn stop_audio_bridge(
 
 #[cfg(test)]
 mod tests {
+    use super::{build_claude_terminal_cmd, UPDATE_PRELUDE};
+    use crate::models::Project;
+
     /// A dropped file must be named the way the *user* named it.
     ///
     /// The bug this pins: `upload_host_file_to_terminal` derived the tar entry
@@ -338,6 +382,122 @@ mod tests {
     /// answer comes from the spelling, and a path that does not name a file is
     /// refused rather than silently substituted (it used to fall back to
     /// `"dropped-file"`).
+    /// A `Project` with only the fields these tests care about set; the rest
+    /// come through serde so the test does not have to track every field.
+    fn project(backend: &str, bedrock_config: serde_json::Value) -> Project {
+        serde_json::from_value(serde_json::json!({
+            "id": "p1",
+            "name": "Test",
+            "paths": [],
+            "container_id": null,
+            "status": "running",
+            "backend": backend,
+            "bedrock_config": bedrock_config,
+            "ollama_config": null,
+            "openai_compatible_config": null,
+            "allow_docker_access": false,
+            "full_permissions": false,
+            "ssh_key_path": null,
+            "git_user_name": null,
+            "git_user_email": null,
+            "created_at": "now",
+            "updated_at": "now"
+        }))
+        .expect("test project deserializes")
+    }
+
+    /// Every Claude session updates the CLI before launching it.
+    ///
+    /// `container/entrypoint.sh` only updates at container *start*, and these
+    /// containers are long-lived, so a stale CLI is the normal case without
+    /// this. The plain (non-Bedrock) path therefore has to be a `bash -c`
+    /// wrapper rather than a bare `claude` argv.
+    #[test]
+    fn build_terminal_cmd_updates_before_launching_claude() {
+        let cmd = build_claude_terminal_cmd(&project("anthropic", serde_json::Value::Null), None, None);
+
+        assert_eq!(cmd[0], "bash");
+        assert_eq!(cmd[1], "-c");
+        assert!(
+            cmd[2].contains(UPDATE_PRELUDE),
+            "plain path must run the update prelude: {}",
+            cmd[2]
+        );
+        assert!(cmd[2].contains("exec claude"), "got: {}", cmd[2]);
+        // The update has to happen *before* the exec, which never returns.
+        assert!(
+            cmd[2].find(UPDATE_PRELUDE).unwrap() < cmd[2].find("exec claude").unwrap(),
+            "prelude must precede the exec: {}",
+            cmd[2]
+        );
+        assert!(
+            UPDATE_PRELUDE.contains("timeout 60") && UPDATE_PRELUDE.contains("||"),
+            "the update must stay time-bounded and non-fatal"
+        );
+    }
+
+    /// The session name is interpolated into a shell script, so a quote in it
+    /// must not break out of its single-quoted argument.
+    #[test]
+    fn build_terminal_cmd_escapes_a_quoted_session_name() {
+        let cmd = build_claude_terminal_cmd(
+            &project("anthropic", serde_json::Value::Null),
+            None,
+            Some("Bob's tab; rm -rf /"),
+        );
+
+        assert!(
+            cmd[2].contains(r#"exec claude -n 'Bob'\''s tab; rm -rf /'"#),
+            "session name must be single-quote escaped: {}",
+            cmd[2]
+        );
+    }
+
+    /// Permission flags travel the same escaped path, and an empty name adds
+    /// no `-n` at all.
+    #[test]
+    fn build_terminal_cmd_quotes_permission_flags_and_omits_an_empty_name() {
+        let mut p = project("anthropic", serde_json::Value::Null);
+        p.full_permissions = true;
+        let cmd = build_claude_terminal_cmd(&p, None, Some(""));
+
+        assert!(
+            cmd[2].contains("exec claude '--dangerously-skip-permissions'\n"),
+            "got: {}",
+            cmd[2]
+        );
+        assert!(!cmd[2].contains(" -n "), "empty name must add no flag: {}", cmd[2]);
+    }
+
+    /// The Bedrock-profile path keeps its AWS validation *and* gains the
+    /// prelude, immediately before the exec.
+    #[test]
+    fn build_terminal_cmd_bedrock_validates_aws_and_updates() {
+        let cmd = build_claude_terminal_cmd(
+            &project("bedrock", serde_json::json!({
+                "auth_method": "profile",
+                "aws_region": "us-east-1",
+                "aws_profile": "acme",
+                "model_id": null,
+                "disable_prompt_caching": false
+            })),
+            None,
+            Some("it's fine"),
+        );
+
+        assert_eq!(cmd[0], "bash");
+        let script = &cmd[2];
+        assert!(script.contains("aws sts get-caller-identity --profile 'acme'"), "got: {}", script);
+        assert!(script.contains("triple-c-sso-refresh"), "got: {}", script);
+        assert!(script.contains(UPDATE_PRELUDE), "got: {}", script);
+        assert!(script.contains(r#"exec claude -n 'it'\''s fine'"#), "got: {}", script);
+        assert!(
+            script.find(UPDATE_PRELUDE).unwrap() < script.find("exec claude").unwrap(),
+            "prelude must precede the exec: {}",
+            script
+        );
+    }
+
     #[test]
     fn a_dropped_file_keeps_the_name_the_user_dropped() {
         use crate::commands::file_commands::host_upload_name;

app/src-tauri/src/docker/container.rs

@@ -3052,6 +3052,118 @@ fn blanked_secret_env() -> Vec<String> {
         .collect()
 }
 
+/// Image-name prefix for the throwaway commit a staleness probe of a stopped
+/// container makes. The reaper's only handle on a leftover — see
+/// [`crate::docker::migration::reap_probe_images`] — so nothing else may use it.
+pub const PROBE_IMAGE_PREFIX: &str = "triple-c-probe-";
+
+/// The throwaway image a staleness probe of a **stopped** container commits to.
+///
+/// **Unique per call**, and both halves of the name earn their place: the
+/// container id prefix makes a leftover traceable in `docker images`, and the
+/// counter makes two overlapping probes independent.
+///
+/// An earlier version of this was deliberately *stable* per container, on the
+/// theory that the next probe would move the tag off an abandoned image and
+/// leave it dangling for [`sweep_orphaned_snapshots`]. That was wrong twice
+/// over. A container id does not survive a recreate, so for most leftovers
+/// there is no "next probe of the same container" and the image was stranded
+/// permanently; and a stable name made two concurrent probes fight over one
+/// tag, where whichever finished first force-removed the image the other was
+/// still reading and turned a healthy project into a bogus `probe_error`.
+/// Uniqueness fixes both, and [`crate::docker::migration::reap_probe_images`]
+/// is what collects the leftovers instead.
+pub fn get_probe_image_name(container_id: &str) -> String {
+    use std::sync::atomic::{AtomicU64, Ordering};
+    static SEQ: AtomicU64 = AtomicU64::new(0);
+
+    let short: String = container_id.chars().take(12).collect();
+    let nanos = std::time::SystemTime::now()
+        .duration_since(std::time::UNIX_EPOCH)
+        .map(|d| d.as_nanos())
+        .unwrap_or(0);
+    format!(
+        "{}{}-{}-{}:latest",
+        PROBE_IMAGE_PREFIX,
+        short,
+        nanos,
+        SEQ.fetch_add(1, Ordering::Relaxed)
+    )
+}
+
+/// Commit a **stopped** container's filesystem to a throwaway image, returning
+/// its name. The caller owns the image and must remove it.
+///
+/// This exists so a stopped project can be read at all. `docker exec` needs a
+/// running container and the snapshot image is not a checkpoint — see
+/// [`crate::commands::migration_commands`]'s probe-source pick — so without
+/// this there is no way to see inside a project that is merely stopped.
+///
+/// ## Why it is tagged at all
+///
+/// An untagged commit would be tidier: untagged plus the `triple-c.managed=true`
+/// that `docker commit` copies off the container is exactly the pair
+/// [`sweep_orphaned_snapshots`] already collects, so a leftover would self-heal
+/// with no new machinery. **It is not available.** `bollard`'s `Commit` response
+/// model deserialises `"ID"` while the daemon sends `"Id"`, so
+/// `commit_container` hands back `id: None` every time and there is no
+/// reference left to probe. Neither existing commit site notices, because both
+/// discard the response. Verified against Engine 29.6, bollard 0.18.1.
+///
+/// So the image needs a name, a tagged image is not dangling, and the sweep
+/// therefore cannot be the safety net. [`crate::docker::migration::reap_probe_images`]
+/// is, and [`get_probe_image_name`] carries the rest of that argument.
+///
+/// ## What is in the image, and what is not
+///
+/// `pause: false` because nothing is running — pausing a stopped container is
+/// an error, the same reason [`recommit_without_secrets`]'s scratch commit
+/// passes `false`.
+///
+/// Secrets are blanked from the env for the same reason
+/// [`commit_container_snapshot`] blanks them: the commit bakes the container's
+/// full ENV into the image, and "it only lives a few seconds" is not a property
+/// this function can promise after a crash.
+///
+/// **The writable layer is committed unscrubbed, and that is unavoidable here.**
+/// [`commit_container_snapshot`] runs [`scrub_writable_layer`] first precisely
+/// because a commit stacks a layer and never rewrites one — but that scrub is a
+/// `docker exec`, which is exactly what a stopped container cannot serve, and
+/// scrubbing is not wanted anyway: the probe's whole job is to report the
+/// filesystem as it actually is. What makes it acceptable is that this copies
+/// bytes that are *already on this disk* in the container's own writable layer,
+/// into an image that is never pushed, never created from, and reaped — so it
+/// duplicates data inside one trust domain rather than widening it. That
+/// argument depends on the reaping actually happening; treat
+/// [`crate::docker::migration::reap_probe_images`] as load-bearing, not tidying.
+pub async fn commit_container_for_probe(container_id: &str) -> Result<String, String> {
+    let docker = get_docker()?;
+    let image_name = get_probe_image_name(container_id);
+    let (repo, tag) = image_name
+        .rsplit_once(':')
+        .map(|(r, t)| (r.to_string(), t.to_string()))
+        .expect("get_probe_image_name always emits a tag");
+
+    docker
+        .commit_container(
+            CommitContainerOptions {
+                container: container_id.to_string(),
+                repo,
+                tag,
+                pause: false,
+                ..Default::default()
+            },
+            Config::<String> {
+                env: Some(blanked_secret_env()),
+                ..Default::default()
+            },
+        )
+        .await
+        .map_err(|e| format!("Failed to commit stopped container {}: {}", container_id, e))?;
+
+    Ok(image_name)
+}
+
 /// Whether `env` (an image's `Config.Env`) holds a non-empty value for any
 /// name in [`SECRET_ENV_KEYS`].
 fn env_holds_a_secret(env: &[String]) -> bool {
@@ -3518,9 +3630,10 @@ pub async fn remove_snapshot_image(project: &Project) -> Result<(), String> {
     remove_image_by_name(&get_snapshot_image_name(project)).await
 }
 
-/// Remove a Docker image by name/tag, treating "does not exist" as success.
-/// Shared by [`remove_snapshot_image`] and the pending-cleanup retry, which
-/// only has the image name (the project record is already gone by then).
+/// Remove a Docker image by name, tag or **id**, treating "does not exist" as
+/// success. Shared by [`remove_snapshot_image`], the pending-cleanup retry
+/// (which only has the image name — the project record is already gone by
+/// then), and the staleness probe's throwaway commit, which has only an id.
 pub async fn remove_image_by_name(image_name: &str) -> Result<(), String> {
     let docker = get_docker()?;
 
@@ -3536,7 +3649,7 @@ pub async fn remove_image_by_name(image_name: &str) -> Result<(), String> {
         .await
     {
         Ok(_) => {
-            log::info!("Removed snapshot image {}", image_name);
+            log::info!("Removed image {}", image_name);
             Ok(())
         }
         Err(bollard::errors::Error::DockerResponseServerError {
@@ -4464,6 +4577,29 @@ mod tests {
         assert!(env_holds_a_secret(&env));
     }
 
+    /// The probe image's name must be **unique per call**. A stable name was
+    /// tried and is wrong twice over: a container id does not survive a
+    /// recreate, so a crashed probe's leftover would never be reclaimed by "the
+    /// next probe of the same container"; and two concurrent probes sharing one
+    /// tag means whichever finishes first force-removes the image the other is
+    /// still reading. See `commit_container_for_probe` and `reap_probe_images`.
+    #[test]
+    fn probe_image_names_are_unique_per_call_and_reapable_by_prefix() {
+        let id = "75993e6d5e1ab473b029a408c5ff0339";
+        let a = get_probe_image_name(id);
+        let b = get_probe_image_name(id);
+        assert_ne!(a, b, "two probes of one container must not share a tag");
+
+        // The prefix is the reaper's only handle on a leftover, so every name
+        // has to carry it — and it must not be the snapshot namespace, which is
+        // what a project is rebuilt from.
+        assert!(a.starts_with(PROBE_IMAGE_PREFIX), "{}", a);
+        assert!(!a.starts_with("triple-c-snapshot-"), "{}", a);
+        // Traceable back to its container, which is the point of the prefix.
+        assert!(a.contains("75993e6d5e1a"), "{}", a);
+        assert!(a.ends_with(":latest"), "{}", a);
+    }
+
     #[test]
     fn the_scrub_report_only_claims_success_when_nothing_is_left() {
         let clean = SnapshotScrubReport {

app/src-tauri/src/docker/migration.rs

@@ -886,6 +886,100 @@ pub async fn reap_probe_containers() {
     }
 }
 
+/// Remove throwaway images left behind by a staleness probe of a stopped
+/// container — [`super::container::commit_container_for_probe`]'s commits.
+///
+/// **Load-bearing, not tidying.** A probe image is *tagged*, because bollard
+/// gives no image id back from a commit and there has to be something to probe.
+/// Tagged means not dangling, so [`super::container::sweep_orphaned_snapshots`]
+/// — which collects every other kind of orphan this app can leave — will never
+/// see one. Without this, a probe that dies between its commit and its own
+/// cleanup (SIGKILL, a crash, a 409 from a concurrent remove) strands a
+/// multi-gigabyte image that **no code path can ever reclaim**, and there is no
+/// UI to find it either. That is the one leak in this app with no floor on it,
+/// so this runs at startup beside [`reap_probe_containers`].
+///
+/// Age-gated for exactly the reason that one is: `reference=` is a daemon-wide
+/// filter, so a second copy of the app probing a project on the same daemon has
+/// images matching this glob, and removing one mid-capture fails that probe with
+/// "No such image" — the bogus `probe_error` the staleness work exists to get
+/// rid of. In-process state cannot see the other instance, so age is the only
+/// brake, and [`PROBE_REAP_MIN_AGE_SECS`] is already the right one: a probe is a
+/// `find` over a root filesystem, not a multi-minute job.
+///
+/// Never fails the caller. Housekeeping, like every other sweep here.
+pub async fn reap_probe_images() {
+    use bollard::image::{ListImagesOptions, RemoveImageOptions};
+
+    let docker = match get_docker() {
+        Ok(d) => d,
+        Err(e) => {
+            log::warn!("Could not reap leftover probe images: {}", e);
+            return;
+        }
+    };
+
+    let filters = HashMap::from([(
+        "reference".to_string(),
+        vec![format!("{}*", super::container::PROBE_IMAGE_PREFIX)],
+    )]);
+    let images = match docker
+        .list_images(Some(ListImagesOptions {
+            all: false,
+            filters,
+            ..Default::default()
+        }))
+        .await
+    {
+        Ok(images) => images,
+        Err(e) => {
+            log::warn!("Could not list leftover probe images: {}", e);
+            return;
+        }
+    };
+
+    let now = chrono::Utc::now().timestamp();
+    for image in images {
+        // Unlike a container summary, an image summary always carries a
+        // `Created`, so there is no unknown-age case to defend against here.
+        if now - image.created < PROBE_REAP_MIN_AGE_SECS {
+            log::info!(
+                "Leaving probe image {:?} alone — it is younger than {} minutes, so it may belong \
+                 to another Triple-C instance's live probe",
+                image.repo_tags,
+                PROBE_REAP_MIN_AGE_SECS / 60
+            );
+            continue;
+        }
+        // By **tag**, never by image id. A `force` removal by id untags an
+        // image everywhere, so an id that happens to carry another name loses
+        // that name too — which is how a test fixture that tagged
+        // `alpine:latest` into this namespace deleted the user's alpine. A real
+        // leftover has exactly the one probe tag, so removing the tag removes
+        // the image; anything else keeps whatever other names it has.
+        for tag in image
+            .repo_tags
+            .iter()
+            .filter(|t| t.starts_with(super::container::PROBE_IMAGE_PREFIX))
+        {
+            log::info!("Removing leftover probe image {}", tag);
+            if let Err(e) = docker
+                .remove_image(
+                    tag,
+                    Some(RemoveImageOptions {
+                        force: true,
+                        noprune: false,
+                    }),
+                    None,
+                )
+                .await
+            {
+                log::warn!("Could not remove leftover probe image {}: {}", tag, e);
+            }
+        }
+    }
+}
+
 /// How old a `triple-c.probe=migration` container must be before
 /// [`reap_probe_containers`] will force-remove it, in seconds.
 ///
@@ -993,6 +1087,119 @@ pub async fn manifest_from_container(container_id: &str) -> Result<Manifest, Str
     Ok(parse_manifest(&out))
 }
 
+/// Cached stopped-container manifests, keyed by container id, each paired with
+/// the container's `FinishedAt` at the time it was captured.
+///
+/// **Sound because a stopped container's writable layer cannot change.** Nothing
+/// can write to it while it is not running, so a manifest captured after it
+/// stopped stays true until it is started again — and `FinishedAt` moves on
+/// every stop, which is what makes the key exact rather than merely plausible.
+///
+/// This exists because `get_container_staleness` is called from a `useEffect`
+/// that fires whenever the container settles, so simply opening a stopped
+/// project's Overview probes it. Uncached that meant a `docker commit` of the
+/// whole writable layer per visit — measured at 44 s on a real project — where
+/// before this feature the same visit cost one throwaway container or nothing at
+/// all. A regression like that is not worth the answer it buys.
+///
+/// Capped, because a `Manifest` of a real container is a few MB: this only has
+/// to serve "the project whose page is open", so a handful of entries is the
+/// whole working set and the oldest is dropped past that.
+static STOPPED_MANIFEST_CACHE: std::sync::Mutex<
+    Option<Vec<(String, String, Manifest)>>,
+> = std::sync::Mutex::new(None);
+
+/// How many stopped-container manifests [`STOPPED_MANIFEST_CACHE`] keeps.
+const STOPPED_MANIFEST_CACHE_MAX: usize = 4;
+
+/// `FinishedAt` for a container, the cache's validity token. `None` when it
+/// cannot be read, which is never treated as a hit.
+async fn container_finished_at(container_id: &str) -> Option<String> {
+    let docker = get_docker().ok()?;
+    docker
+        .inspect_container(container_id, None)
+        .await
+        .ok()?
+        .state?
+        .finished_at
+        .filter(|s| !s.is_empty())
+}
+
+/// Capture a [`Manifest`] from a **stopped** container, reusing a cached one
+/// when the container has not been started since it was taken.
+///
+/// See [`STOPPED_MANIFEST_CACHE`] for why this is exact and why it is needed.
+pub async fn manifest_from_stopped_container_cached(
+    container_id: &str,
+) -> Result<Manifest, String> {
+    let finished_at = container_finished_at(container_id).await;
+
+    if let Some(token) = &finished_at {
+        let guard = STOPPED_MANIFEST_CACHE.lock();
+        if let Ok(cache) = guard {
+            if let Some(entries) = cache.as_ref() {
+                if let Some((_, _, manifest)) = entries
+                    .iter()
+                    .find(|(id, tok, _)| id == container_id && tok == token)
+                {
+                    log::debug!(
+                        "Reusing the cached manifest for stopped container {}",
+                        container_id
+                    );
+                    return Ok(manifest.clone());
+                }
+            }
+        }
+    }
+
+    let manifest = manifest_from_stopped_container(container_id).await?;
+
+    // Only cacheable if the container's state could be read at all; an unknown
+    // `FinishedAt` means there is no token that could later be compared.
+    if let Some(token) = finished_at {
+        if let Ok(mut cache) = STOPPED_MANIFEST_CACHE.lock() {
+            let entries = cache.get_or_insert_with(Vec::new);
+            entries.retain(|(id, _, _)| id != container_id);
+            entries.push((container_id.to_string(), token, manifest.clone()));
+            while entries.len() > STOPPED_MANIFEST_CACHE_MAX {
+                entries.remove(0);
+            }
+        }
+    }
+
+    Ok(manifest)
+}
+
+/// Capture a [`Manifest`] from a **stopped** container.
+///
+/// Commits the container's writable layer to a throwaway image, probes that,
+/// and removes it. This is as current as [`manifest_from_container`] — it reads
+/// the same filesystem — and it is why a stopped project no longer has to fall
+/// back to its snapshot image, which may not exist at all and lags the
+/// container by everything installed since the last commit when it does.
+///
+/// The image is removed on every path, including a failed probe. See
+/// [`super::container::commit_container_for_probe`] for what a crash in the
+/// window between the two costs, and why it is bounded.
+pub async fn manifest_from_stopped_container(container_id: &str) -> Result<Manifest, String> {
+    let image = super::container::commit_container_for_probe(container_id).await?;
+
+    let manifest = manifest_from_image(&image)
+        .await
+        .map_err(|e| format!("Probe of the stopped container did not complete: {}", e));
+
+    if let Err(e) = super::container::remove_image_by_name(&image).await {
+        log::warn!(
+            "Could not remove the staleness probe's throwaway image {}: {} — `reap_probe_images` \
+             collects it at the next app start; the orphan sweep never will, because it is tagged",
+            image,
+            e
+        );
+    }
+
+    manifest
+}
+
 /// The image ID (`sha256:…`) of a local image, or `None` if it is not present.
 ///
 /// Deliberately the **ID**, not a repo digest: locally built images and custom
@@ -2146,4 +2353,258 @@ mod tests {
         assert!(!pin_is_reapable("pre-migration-handmade", false, ancient, &now));
         assert!(!pin_is_reapable("latest", false, ancient, &now));
     }
+
+    // ── Live Docker ─────────────────────────────────────────────────────────
+
+    /// The cache serves a second read of an unchanged stopped container, and —
+    /// the half that matters — stops serving it the moment the container is
+    /// started and stopped again. If invalidation were wrong this would report a
+    /// filesystem the project no longer has, and a migration would be planned
+    /// against it.
+    ///
+    /// ```text
+    /// cargo test -- --ignored --nocapture stopped_manifest_cache
+    /// ```
+    #[cfg(unix)]
+    #[tokio::test]
+    #[ignore = "needs a Docker daemon; creates, commits and removes a throwaway container"]
+    async fn the_stopped_manifest_cache_survives_a_reread_but_not_a_restart() {
+        fn docker_cli(args: &[&str]) -> String {
+            let out = std::process::Command::new("docker")
+                .args(args)
+                .output()
+                .expect("docker CLI");
+            assert!(
+                out.status.success(),
+                "docker {:?} failed: {}",
+                args,
+                String::from_utf8_lossy(&out.stderr)
+            );
+            String::from_utf8_lossy(&out.stdout).trim().to_string()
+        }
+
+        let image = std::env::var("TRIPLE_C_TEST_IMAGE")
+            .unwrap_or_else(|_| "ghcr.io/shadowdao/triple-c-sandbox:latest".to_string());
+        let first = format!("/opt/cache-marker-a-{}", std::process::id());
+        let second = format!("/opt/cache-marker-b-{}", std::process::id());
+
+        let id = docker_cli(&[
+            "run", "-d", "--label", "triple-c.managed=true",
+            "--entrypoint", "/bin/sh",
+            &image, "-c", "sleep 600",
+        ]);
+        let cleanup = || {
+            let _ = std::process::Command::new("docker")
+                .args(["rm", "-f", &id])
+                .output();
+        };
+
+        docker_cli(&["exec", &id, "mkdir", "-p", &first]);
+        docker_cli(&["stop", "-t", "1", &id]);
+
+        let t0 = std::time::Instant::now();
+        let cold = manifest_from_stopped_container_cached(&id).await;
+        let cold_ms = t0.elapsed().as_millis();
+
+        let t1 = std::time::Instant::now();
+        let warm = manifest_from_stopped_container_cached(&id).await;
+        let warm_ms = t1.elapsed().as_millis();
+
+        // Restart, change the filesystem, stop again — `FinishedAt` moves.
+        docker_cli(&["start", &id]);
+        docker_cli(&["exec", &id, "mkdir", "-p", &second]);
+        docker_cli(&["stop", "-t", "1", &id]);
+        let after_restart = manifest_from_stopped_container_cached(&id).await;
+
+        cleanup();
+
+        let has = |m: &Manifest, p: &str| m.paths.iter().any(|e| e.path == p && e.is_dir());
+
+        let cold = cold.expect("cold read");
+        let warm = warm.expect("warm read");
+        let after_restart = after_restart.expect("read after restart");
+
+        assert!(has(&cold, &first), "cold read missed {}", first);
+        assert!(has(&warm, &first), "warm read missed {}", first);
+        println!("cold {} ms, warm {} ms", cold_ms, warm_ms);
+        assert!(
+            warm_ms * 5 < cold_ms.max(5),
+            "the second read cost {} ms against a cold {} ms — it re-committed \
+             instead of using the cache",
+            warm_ms,
+            cold_ms
+        );
+
+        // The restart must have invalidated it: the new directory has to show up.
+        assert!(
+            has(&after_restart, &second),
+            "a restart did not invalidate the cache — {} is missing, so this is \
+             a stale manifest of a filesystem the container no longer has",
+            second
+        );
+        assert!(has(&after_restart, &first), "the restart lost {}", first);
+    }
+
+    /// The reaper finds a leftover probe image by prefix and — crucially —
+    /// refuses to remove a young one, because that image may be another
+    /// Triple-C instance's live probe. Only a real daemon can say whether the
+    /// `reference=` glob matches the names `get_probe_image_name` produces.
+    ///
+    /// The fixture is **committed**, not tagged and not built. An image's
+    /// `Created` is its own, not its tag's, so tagging something already on disk
+    /// into this namespace yields a fixture the reaper is right to call ancient
+    /// — and BuildKit stamps a fixed epoch on `docker build` output, so a built
+    /// one looks ancient too. A commit stamps *now*, verified against Engine
+    /// 29.6, which is also how real probe images get their age.
+    ///
+    /// Both of those mistakes were made here first, and one of them deleted an
+    /// unrelated `alpine:latest` — which is why `reap_probe_images` removes by
+    /// tag rather than by image id.
+    ///
+    /// ```text
+    /// cargo test -- --ignored --nocapture reaper_spares
+    /// ```
+    #[cfg(unix)]
+    #[tokio::test]
+    #[ignore = "needs a Docker daemon; builds and removes a throwaway image"]
+    async fn the_reaper_spares_a_probe_image_young_enough_to_be_someone_elses() {
+        use std::process::Command;
+
+        fn docker_out(args: &[&str]) -> std::process::Output {
+            Command::new("docker").args(args).output().expect("docker CLI")
+        }
+
+        let base = std::env::var("TRIPLE_C_TEST_IMAGE")
+            .unwrap_or_else(|_| "alpine:latest".to_string());
+        let name = crate::docker::container::get_probe_image_name("reapertest01234");
+
+        // A never-started container is enough to commit from, and leaves the
+        // daemon's run state alone entirely.
+        let created = docker_out(&["create", &base, "true"]);
+        assert!(
+            created.status.success(),
+            "could not create the fixture container from {}: {}",
+            base,
+            String::from_utf8_lossy(&created.stderr)
+        );
+        let cid = String::from_utf8_lossy(&created.stdout).trim().to_string();
+
+        let committed = docker_out(&["commit", "--pause=false", &cid, &name]);
+        let _ = docker_out(&["rm", "-f", &cid]);
+        assert!(
+            committed.status.success(),
+            "could not commit the fixture image: {}",
+            String::from_utf8_lossy(&committed.stderr)
+        );
+
+        reap_probe_images().await;
+
+        let still_there = Command::new("docker")
+            .args(["image", "inspect", &name])
+            .output()
+            .expect("docker image inspect")
+            .status
+            .success();
+
+        let _ = Command::new("docker").args(["rmi", &name]).output();
+
+        assert!(
+            still_there,
+            "a probe image committed seconds ago was reaped — that is another \
+             instance's live probe being broken, see PROBE_REAP_MIN_AGE_SECS"
+        );
+    }
+
+    /// A *stopped* container is readable, and what comes back is its writable
+    /// layer rather than the image it was created from. This is the whole point
+    /// of the function: the base image cannot answer it, and the project may
+    /// well have no snapshot image at all.
+    ///
+    /// Also asserts the throwaway commit leaves nothing behind, which no unit
+    /// test can. It has to assert on the `triple-c-probe-*` tags specifically:
+    /// the probe image is *tagged*, so a leak never shows up as a dangling
+    /// image and a dangling-set assertion here would pass either way.
+    ///
+    /// Ignored because it needs Docker and commits a container; run it with
+    ///
+    /// ```text
+    /// cargo test -- --ignored --nocapture stopped_container
+    /// ```
+    #[cfg(unix)]
+    #[tokio::test]
+    #[ignore = "needs a Docker daemon; creates, commits and removes a throwaway container"]
+    async fn a_stopped_container_is_read_from_its_writable_layer() {
+        fn docker_cli(args: &[&str]) -> String {
+            let out = std::process::Command::new("docker")
+                .args(args)
+                .output()
+                .expect("docker CLI");
+            assert!(
+                out.status.success(),
+                "docker {:?} failed: {}",
+                args,
+                String::from_utf8_lossy(&out.stderr)
+            );
+            String::from_utf8_lossy(&out.stdout).trim().to_string()
+        }
+        fn probe_images() -> Vec<String> {
+            let mut ids: Vec<String> = docker_cli(&[
+                "images", "-q",
+                "--filter",
+                &format!("reference={}*", crate::docker::container::PROBE_IMAGE_PREFIX),
+            ])
+            .lines()
+            .map(|l| l.trim().to_string())
+            .filter(|l| !l.is_empty())
+            .collect();
+            ids.sort();
+            ids
+        }
+
+        let image = std::env::var("TRIPLE_C_TEST_IMAGE")
+            .unwrap_or_else(|_| "ghcr.io/shadowdao/triple-c-sandbox:latest".to_string());
+        // A marker only the writable layer can carry, under a MANIFEST_ROOTS root.
+        let marker = format!("/opt/probe-marker-{}", std::process::id());
+
+        // Another instance's live probe images are allowed to exist; what must
+        // hold is that this probe adds none of its own.
+        let before = probe_images();
+
+        let id = docker_cli(&[
+            "run", "-d", "--label", "triple-c.managed=true",
+            "--entrypoint", "/bin/sh",
+            &image, "-c", "sleep 300",
+        ]);
+        let cleanup = |id: &str| {
+            let _ = std::process::Command::new("docker")
+                .args(["rm", "-f", id])
+                .output();
+        };
+
+        docker_cli(&["exec", &id, "mkdir", "-p", &marker]);
+        docker_cli(&["stop", "-t", "1", &id]);
+
+        let result = manifest_from_stopped_container(&id).await;
+
+        cleanup(&id);
+
+        let manifest = result.expect("a stopped container must be probeable");
+        assert!(
+            manifest.paths.iter().any(|e| e.path == marker && e.is_dir()),
+            "the probe read the image, not the container's writable layer: {} missing",
+            marker
+        );
+        // Non-empty package sets prove the probe script really ran, rather than
+        // parsing an empty transcript into an empty-but-Ok manifest.
+        assert!(
+            !manifest.apt_manual.is_empty(),
+            "apt-mark showmanual came back empty, so the probe did not run"
+        );
+
+        assert_eq!(
+            probe_images(),
+            before,
+            "the throwaway probe image was not cleaned up"
+        );
+    }
 }

app/src-tauri/src/lib.rs

@@ -263,12 +263,20 @@ pub fn run() {
             // logged warning rather than a failed start.
             //
             // Ordering matters. Probes are removed first because a probe holds
-            // an image open and the sweep will not force; pins are untagged
+            // an image open and the sweep will not force — both the probe
+            // containers and the probe images, the latter being the one orphan
+            // the sweep can never reach on its own; pins are untagged
             // second so the images they were holding are dangling by the time
             // the sweep lists them; the sweep runs last and collects both.
             let projects_store_for_cleanup = projects_store_setup.clone();
             tauri::async_runtime::spawn(async move {
                 crate::docker::reap_probe_containers().await;
+                // Probe *images* too, and for a sharper reason: a probe
+                // container merely pins an image the sweep then refuses to
+                // touch, whereas a leftover probe image is tagged and so
+                // nothing else in this app can ever collect it. See
+                // `reap_probe_images`.
+                crate::docker::reap_probe_images().await;
                 let reaped = crate::docker::reap_stale_migration_pins().await;
                 if reaped > 0 {
                     log::info!("Startup housekeeping dropped {} stale rollback pin(s)", reaped);

app/src-tauri/src/web_terminal/ws_handler.rs

@@ -206,6 +206,11 @@ pub async fn handle_connection(socket: WebSocket, state: Arc<WebTerminalState>)
     writer_handle.abort();
 }
 
+/// The desktop terminal's update prelude, reused verbatim. Shared rather than
+/// copied so the web terminal cannot drift from it — a duplicated `const` with
+/// a "keep these identical" comment is only as good as the next reader.
+use crate::commands::terminal_commands::UPDATE_PRELUDE;
+
 /// Build the command for a terminal session, mirroring terminal_commands.rs logic.
 fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settings_store::SettingsStore) -> Vec<String> {
     let is_bedrock_profile = project.backend == Backend::Bedrock
@@ -217,17 +222,6 @@ fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settin
 
     let permission_args = project.effective_permission_mode().cli_args();
 
-    if !is_bedrock_profile {
-        let mut cmd = vec!["claude".to_string()];
-        cmd.extend(permission_args);
-        return cmd;
-    }
-
-    let profile = aws_commands::resolve_profile_for_project(
-        project,
-        settings_store.get().global_aws.aws_profile.as_deref(),
-    );
-
     // The args are interpolated into a shell script string below, so
     // single-quote each one.
     let permission_flags: String = permission_args
@@ -236,6 +230,19 @@ fn build_terminal_cmd(project: &Project, settings_store: &crate::storage::settin
         .collect();
     let claude_cmd = format!("exec claude{}", permission_flags);
 
+    if !is_bedrock_profile {
+        return vec![
+            "bash".to_string(),
+            "-c".to_string(),
+            format!("{}\n{}\n", UPDATE_PRELUDE, claude_cmd),
+        ];
+    }
+
+    let profile = aws_commands::resolve_profile_for_project(
+        project,
+        settings_store.get().global_aws.aws_profile.as_deref(),
+    );
+
     let script = format!(
         r#"
 echo "Validating AWS session for profile '{profile}'..."
@@ -260,9 +267,11 @@ else
         echo ""
     fi
 fi
+{update_prelude}
 {claude_cmd}
 "#,
         profile = profile,
+        update_prelude = UPDATE_PRELUDE,
         claude_cmd = claude_cmd
     );
 

app/src/components/layout/StatusBar.tsx

@@ -10,7 +10,7 @@ interface Props {
 export default function StatusBar({ stt }: Props) {
   const {
     projects, sessions, terminalHasSelection, activeSessionId, sttEnabled,
-    terminalAtBottom, scrollActiveToBottom, notesDockOpen, toggleNotesDock,
+    notesDockOpen, toggleNotesDock, terminalMouseCaptured, releaseActiveMouse,
   } = useAppState(
     useShallow(s => ({
       projects: s.projects,
@@ -18,10 +18,10 @@ export default function StatusBar({ stt }: Props) {
       terminalHasSelection: s.terminalHasSelection,
       activeSessionId: s.activeSessionId,
       sttEnabled: s.appSettings?.stt?.enabled,
-      terminalAtBottom: s.terminalAtBottom,
-      scrollActiveToBottom: s.scrollActiveToBottom,
       notesDockOpen: s.notesDockOpen,
       toggleNotesDock: s.toggleNotesDock,
+      terminalMouseCaptured: s.terminalMouseCaptured,
+      releaseActiveMouse: s.releaseActiveMouse,
     }))
   );
   const running = projects.filter((p) => p.status === "running").length;
@@ -60,15 +60,16 @@ export default function StatusBar({ stt }: Props) {
           </span>
         </>
       )}
-      {/* Right-aligned controls: Jump to Current + STT mic */}
+      {/* Right-aligned controls: mouse release + Notes + STT mic */}
       <div className="ml-auto flex items-center gap-3 pl-2">
-        {activeSessionId && !terminalAtBottom && (
+        {activeSessionId && terminalMouseCaptured && (
           <button
-            onClick={() => scrollActiveToBottom()}
+            data-mouse-release="true"
+            onClick={() => releaseActiveMouse()}
             className="text-[var(--accent)] hover:text-[var(--accent-hover)] cursor-pointer"
-            title="Scroll the terminal to the latest output"
+            title="A program in the container is reading the mouse, so clicks and drags go to it instead of selecting text. Click, or press Ctrl+Shift+X, to take it back. To select text without taking it back, hold Shift while dragging (Option on macOS)."
           >
-            Jump to Current ↓
+            🖱 Mouse captured — release
           </button>
         )}
         <button

app/src/components/terminal/TerminalView.test.tsx

@@ -3,6 +3,7 @@ import { render, fireEvent, cleanup, act } from "@testing-library/react";
 import TerminalView, { supersedes } from "./TerminalView";
 import { useAppState } from "../../store/appState";
 import { uploadHostFileToTerminal } from "../../lib/tauri-commands";
+import { URL_TOAST_SELECTOR } from "./UrlToast";
 
 /**
  * The window-wide native drag-drop listener, captured at registration.
@@ -370,15 +371,34 @@ describe("TerminalView — where a dropped file lands", () => {
     expect(vi.mocked(uploadHostFileToTerminal)).toHaveBeenCalledTimes(1);
   });
 
-  it("uploads a file dropped onto the always-present Following toggle", async () => {
-    // The regression this file could not see. The toggle is `absolute top-2
-    // right-4 z-50` and is rendered unconditionally, so `elementFromPoint`
-    // returns *it* for the terminal's top-right corner — and a gate asking
+  it("uploads a file dropped onto the chrome painted over the terminal", async () => {
+    // The regression this file could not see. Chrome like the URL toast is a
+    // *sibling* of the xterm host painted over the pane, so
+    // `elementFromPoint` returns it rather than the host — and a gate asking
     // "is what is painted here inside the xterm host?" answered no, forever,
     // with no message and no log line. jsdom never ran that branch.
-    const view = await mountWithLayout();
-    const toggle = view.getByTitle(/Auto-scroll/i);
-    stubElementFromPoint(toggle);
+    //
+    // The original fixture was the always-rendered "▼ Following" toggle. That
+    // control is retired and the mouse-release button that could have replaced
+    // it lives in the status bar now, so the toast is what stands in — it is
+    // real chrome over the pane, which is the only property under test.
+    await mountWithLayout();
+    const emit = ptyOutput.listeners.get("terminal-output-s1");
+    if (!emit) throw new Error("no terminal-output listener registered");
+    await act(async () => {
+      emit({
+        payload: Array.from(
+          new TextEncoder().encode(
+            `\x1b]7777;open;${btoa("https://example.com/x")}\x07`,
+          ),
+        ),
+      });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+    const toast = document.querySelector(URL_TOAST_SELECTOR);
+    if (!toast) throw new Error("URL toast not shown");
+    stubElementFromPoint(toast);
 
     await drop(780, 10);
 
@@ -593,4 +613,89 @@ describe("TerminalView — focus on request", () => {
     });
     expect(document.activeElement).toBe(helperTextarea(view.container));
   });
-});
+});
+describe("TerminalView — releasing a captured mouse", () => {
+  /** Feed raw bytes to the terminal as if the container had printed them, and
+   *  let xterm drain its write queue (it parses asynchronously). */
+  async function emitBytes(text: string) {
+    const emit = ptyOutput.listeners.get("terminal-output-s1");
+    if (!emit) throw new Error("no terminal-output listener registered");
+    await act(async () => {
+      emit({ payload: Array.from(new TextEncoder().encode(text)) });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+  }
+
+  /** What the status bar would render from: the active terminal publishes the
+   *  capture state, and the release action, into the store. The control itself
+   *  lives in `StatusBar` — deliberately, so it never sits on top of the TUI
+   *  that is asking for the mouse. */
+  function captured(): boolean {
+    return useAppState.getState().terminalMouseCaptured;
+  }
+
+  it("shows nothing while the container has not grabbed the mouse", async () => {
+    mountSession("claude");
+    await act(async () => {});
+
+    expect(captured()).toBe(false);
+  });
+
+  it("surfaces a release control once the container turns mouse tracking on", async () => {
+    // `?1003h` is any-event tracking: every mouse *move* over the terminal is
+    // reported to the app. When the TUI that asked for it dies without
+    // resetting the mode, xterm keeps routing moves to the PTY and drops text
+    // selection — the freeze this control exists to break out of.
+    mountSession("claude");
+    await act(async () => {});
+
+    await emitBytes("\x1b[?1003h\x1b[?1006h");
+
+    expect(captured()).toBe(true);
+  });
+
+  it("clears the mode locally, without sending a byte to the container", async () => {
+    // The reset is written into xterm's own parser, not onto the wire. The
+    // program inside is usually gone; if it is not, it must not be told the
+    // user pulled the mouse back, or a live TUI would just re-grab it.
+    mountSession("claude");
+    await act(async () => {});
+    await emitBytes("\x1b[?1003h");
+    terminalInput.mockClear();
+
+    // Exactly what the status-bar button's onClick does.
+    const release = useAppState.getState().releaseActiveMouse;
+    await act(async () => {
+      release();
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+
+    // The published flag is bound to the live mode, so it going false *is* the
+    // assertion that xterm's mouse tracking is back to "none".
+    expect(captured()).toBe(false);
+    expect(terminalInput).not.toHaveBeenCalled();
+  });
+
+  it("releases on Ctrl+Shift+X, for when the pointer itself is unusable", async () => {
+    const { container } = mountSession("claude");
+    await act(async () => {});
+    await emitBytes("\x1b[?1002h");
+    terminalInput.mockClear();
+
+    await act(async () => {
+      fireEvent.keyDown(helperTextarea(container), {
+        key: "X",
+        ctrlKey: true,
+        shiftKey: true,
+      });
+      await new Promise((r) => setTimeout(r, 0));
+      await new Promise((r) => setTimeout(r, 0));
+    });
+
+    expect(captured()).toBe(false);
+    // The chord must not also reach the container as input.
+    expect(terminalInput).not.toHaveBeenCalled();
+  });
+});

app/src/components/terminal/TerminalView.tsx

@@ -99,8 +99,8 @@ export default function TerminalView({ sessionId, active }: Props) {
   const { sendInput, pasteImage, resize, onOutput, onExit } = useTerminal();
   const gpuRenderingSetting = useAppState(s => s.appSettings?.terminal_gpu_rendering ?? null);
   const setTerminalHasSelection = useAppState(s => s.setTerminalHasSelection);
-  const setTerminalAtBottom = useAppState(s => s.setTerminalAtBottom);
-  const setScrollActiveToBottom = useAppState(s => s.setScrollActiveToBottom);
+  const setTerminalMouseCaptured = useAppState(s => s.setTerminalMouseCaptured);
+  const setReleaseActiveMouse = useAppState(s => s.setReleaseActiveMouse);
 
   const ssoBufferRef = useRef("");
   const ssoTriggeredRef = useRef(false);
@@ -219,14 +219,11 @@ export default function TerminalView({ sessionId, active }: Props) {
     return () => document.removeEventListener("keydown", onKeyDown, true);
   }, []);
   const [imagePasteMsg, setImagePasteMsg] = useState<string | null>(null);
-  const [isAtBottom, setIsAtBottom] = useState(true);
-  const [isAutoFollow, setIsAutoFollow] = useState(true);
   const [contextMenu, setContextMenu] = useState<{ x: number; y: number } | null>(null);
-  const isAtBottomRef = useRef(true);
-  // Tracks user intent to follow output — only set to false by explicit user
-  // actions (mouse wheel up), not by xterm scroll events during writes.
-  const autoFollowRef = useRef(true);
-  const lastUserScrollTimeRef = useRef(0);
+  // True while the program in the container holds mouse reporting open (any of
+  // the DECSET ?1000/?1002/?1003 tracking modes). See `syncMouseCapture`.
+  const [mouseCaptured, setMouseCaptured] = useState(false);
+  const mouseCapturedRef = useRef(false);
 
   // Keep latest `active` readable inside long-lived listeners (drag-drop below,
   // and the unmount-cleanup effect further down).
@@ -251,10 +248,10 @@ export default function TerminalView({ sessionId, active }: Props) {
   //
   // The rect asked about is the **pane wrapper**, not the xterm host inside it:
   // the pane is what the user sees as "the terminal", gutter included, and the
-  // chrome painted over it (the Following toggle, the URL toast) is a sibling
-  // of the host rather than a child. Nothing painted over the pane refuses a
-  // drop on its own account — asking "is this element mine?" once turned every
-  // pixel under that chrome into a permanent dead zone.
+  // chrome painted over it (the mouse-release badge, the URL toast) is a
+  // sibling of the host rather than a child. Nothing painted over the pane
+  // refuses a drop on its own account — asking "is this element mine?" once
+  // turned every pixel under that chrome into a permanent dead zone.
   useEffect(() => {
     let unlisten: (() => void) | undefined;
     let cancelled = false;
@@ -315,12 +312,60 @@ export default function TerminalView({ sessionId, active }: Props) {
     };
   }, [sessionId, sendInput]);
 
+  /**
+   * Reconcile the badge with xterm's live mouse-tracking mode.
+   *
+   * There is no event for this, but there does not need to be a poll either:
+   * the mode only ever changes because the container printed a DECSET/DECRST
+   * sequence, so checking once per write covers every transition, exactly when
+   * it happens. The ref gate keeps the common case (mode unchanged, thousands
+   * of writes a second) down to one string comparison and no re-render.
+   */
+  const syncMouseCapture = useCallback(() => {
+    const term = termRef.current;
+    if (!term) return;
+    const captured = term.modes.mouseTrackingMode !== "none";
+    if (captured === mouseCapturedRef.current) return;
+    mouseCapturedRef.current = captured;
+    setMouseCaptured(captured);
+  }, []);
+
+  /**
+   * Take the mouse back from a program that grabbed it and never let go.
+   *
+   * A TUI that dies mid-menu (or is killed, or detaches) leaves its mouse
+   * tracking modes set. xterm goes on routing clicks, drags and — under
+   * `?1003` — every pointer *move* to the PTY, which kills text selection and
+   * floods the prompt with escape bytes. The result reads as a frozen
+   * terminal, and until now the only exit was closing the tab.
+   *
+   * The reset is `term.write`, deliberately, not `sendInput`: it goes into
+   * xterm's own parser and never onto the wire. The program that asked for
+   * tracking is usually already gone; if it is not, telling it the user pulled
+   * the mouse back would only invite it to grab again on its next repaint.
+   */
+  const releaseMouse = useCallback(() => {
+    const term = termRef.current;
+    if (!term) return;
+    // The three tracking modes, then the two encodings they report in. All
+    // five, because a program is free to have set any combination and a
+    // leftover encoding mode outlives the tracking mode that motivated it.
+    term.write("\x1b[?1000l\x1b[?1002l\x1b[?1003l\x1b[?1006l\x1b[?1015l", syncMouseCapture);
+  }, [syncMouseCapture]);
+
   useEffect(() => {
     if (!containerRef.current) return;
 
     const term = new Terminal({
       cursorBlink: true,
       fontSize: 14,
+      // Let the user select text even while a program holds the mouse.
+      // xterm's force-selection modifier is Shift everywhere *except* macOS,
+      // where it is Option and is gated behind this option, which defaults to
+      // false — so without this line Mac users have no force-select at all and
+      // the only way to copy from a mouse-driven TUI is to take the mouse back
+      // first. `SelectionService.shouldForceSelection`.
+      macOptionClickForcesSelection: true,
       fontFamily: "'JetBrains Mono', 'Fira Code', 'Cascadia Code', Menlo, Monaco, monospace",
       theme: {
         background: "#0d1117",
@@ -391,6 +436,14 @@ export default function TerminalView({ sessionId, active }: Props) {
         useAppState.getState().sttToggle();
         return false;
       }
+      // Ctrl+Shift+X hands the mouse back. Same action as the badge, bound to
+      // a key because the failure this recovers from is *the pointer not
+      // working* — a control you have to click can be unreachable in exactly
+      // the situation that calls for it.
+      if (event.type === "keydown" && event.ctrlKey && event.shiftKey && event.key === "X") {
+        releaseMouse();
+        return false;
+      }
       // Shift+Enter inserts a newline in Claude Code's prompt instead of
       // submitting it. xterm.js does not consult `shiftKey` for Enter
       // (`Keyboard.ts`, `case 13`), so without this branch Shift+Enter is
@@ -501,42 +554,6 @@ export default function TerminalView({ sessionId, active }: Props) {
       );
     });
 
-    // Detect user-initiated scroll-up (mouse wheel) to pause auto-follow.
-    // Captured during capture phase so it fires before xterm's own handler.
-    const handleWheel = (e: WheelEvent) => {
-      lastUserScrollTimeRef.current = Date.now();
-      if (e.deltaY < 0) {
-        autoFollowRef.current = false;
-        setIsAutoFollow(false);
-        isAtBottomRef.current = false;
-        setIsAtBottom(false);
-      }
-    };
-    containerRef.current.addEventListener("wheel", handleWheel, { capture: true, passive: true });
-
-    // Track scroll position to show "Jump to Current" button.
-    // Debounce state updates via rAF to avoid excessive re-renders during rapid output.
-    let scrollStateRafId: number | null = null;
-    const scrollDisposable = term.onScroll(() => {
-      const buf = term.buffer.active;
-      const atBottom = buf.viewportY >= buf.baseY;
-      isAtBottomRef.current = atBottom;
-
-      // Re-enable auto-follow only when USER scrolls to bottom (not write-triggered)
-      const isUserScroll = (Date.now() - lastUserScrollTimeRef.current) < 300;
-      if (atBottom && isUserScroll && !autoFollowRef.current) {
-        autoFollowRef.current = true;
-        setIsAutoFollow(true);
-      }
-
-      if (scrollStateRafId === null) {
-        scrollStateRafId = requestAnimationFrame(() => {
-          scrollStateRafId = null;
-          setIsAtBottom(isAtBottomRef.current);
-        });
-      }
-    });
-
     // Track text selection to show copy hint in status bar
     const selectionDisposable = term.onSelectionChange(() => {
       setTerminalHasSelection(term.hasSelection());
@@ -599,15 +616,11 @@ export default function TerminalView({ sessionId, active }: Props) {
 
     const outputPromise = onOutput(sessionId, (data) => {
       if (aborted) return;
-      term.write(data, () => {
-        if (autoFollowRef.current) {
-          term.scrollToBottom();
-          if (!isAtBottomRef.current) {
-            isAtBottomRef.current = true;
-            setIsAtBottom(true);
-          }
-        }
-      });
+      // Scrolling on new output is xterm's own job, and it already gets it
+      // right: it follows the tail while the viewport is at the bottom and
+      // holds position while you are reading further up. The manual
+      // `scrollToBottom()` that used to live here fought that second half.
+      term.write(data, syncMouseCapture);
       detector.feed(data);
 
       // Scan for SSO refresh marker in terminal output
@@ -649,11 +662,18 @@ export default function TerminalView({ sessionId, active }: Props) {
       resizeRafId = requestAnimationFrame(() => {
         resizeRafId = null;
         if (!containerRef.current || containerRef.current.offsetWidth === 0) return;
+        // Whether the viewport was following the tail has to be sampled
+        // *before* the fit: reflowing wrapped lines moves `baseY`, so asking
+        // afterwards cannot tell "was at the bottom" from "was pushed off it".
+        const wasAtBottom =
+          term.buffer.active.viewportY >= term.buffer.active.baseY;
         fitAddon.fit();
         resize(sessionId, term.cols, term.rows);
-        if (autoFollowRef.current) {
-          term.scrollToBottom();
-        }
+        // Only re-anchor a viewport that was already on the tail. This
+        // observer fires for any pane size change — opening the Notes dock,
+        // dragging the sidebar, resizing the window — and none of those are a
+        // reason to yank someone away from the scrollback they are reading.
+        if (wasAtBottom) term.scrollToBottom();
       });
     });
     resizeObserver.observe(containerRef.current);
@@ -667,14 +687,11 @@ export default function TerminalView({ sessionId, active }: Props) {
       osc52Disposable.dispose();
       relayDisposable.dispose();
       inputDisposable.dispose();
-      scrollDisposable.dispose();
       selectionDisposable.dispose();
       setTerminalHasSelection(false);
-      containerRef.current?.removeEventListener("wheel", handleWheel, { capture: true });
       containerRef.current?.removeEventListener("paste", handlePaste, { capture: true });
       outputPromise.then((fn) => fn?.());
       exitPromise.then((fn) => fn?.());
-      if (scrollStateRafId !== null) cancelAnimationFrame(scrollStateRafId);
       if (resizeRafId !== null) cancelAnimationFrame(resizeRafId);
       resizeObserver.disconnect();
       try { webglRef.current?.dispose(); } catch { /* may already be disposed */ }
@@ -723,10 +740,12 @@ export default function TerminalView({ sessionId, active }: Props) {
     }
 
     if (active) {
+      // Same rule as the resize observer: re-anchor only what was already
+      // anchored, so a tab left scrolled up comes back where it was left.
+      const wasAtBottom =
+        term.buffer.active.viewportY >= term.buffer.active.baseY;
       fitRef.current?.fit();
-      if (autoFollowRef.current) {
-        term.scrollToBottom();
-      }
+      if (wasAtBottom) term.scrollToBottom();
       term.focus();
     }
   }, [active, gpuRenderingSetting]);
@@ -826,39 +845,6 @@ export default function TerminalView({ sessionId, active }: Props) {
       );
   }, [urlPrompt, projectId, dismissUrlPrompt]);
 
-  const handleScrollToBottom = useCallback(() => {
-    const term = termRef.current;
-    if (term) {
-      autoFollowRef.current = true;
-      setIsAutoFollow(true);
-      fitRef.current?.fit();
-      term.scrollToBottom();
-      isAtBottomRef.current = true;
-      setIsAtBottom(true);
-    }
-  }, []);
-
-  // Surface this terminal's scroll state to the status bar's "Jump to Current"
-  // control, but only while it's the active (visible) terminal.
-  useEffect(() => {
-    if (!active) return;
-    setTerminalAtBottom(isAtBottom);
-    setScrollActiveToBottom(handleScrollToBottom);
-  }, [active, isAtBottom, handleScrollToBottom, setTerminalAtBottom, setScrollActiveToBottom]);
-
-  // On unmount, if this was the active terminal, clear the status-bar scroll
-  // state so it doesn't point at a disposed terminal. (Tab switches don't
-  // unmount — the deactivating terminal stays mounted but hidden — so this
-  // only fires when the active session is actually closed.)
-  useEffect(() => {
-    return () => {
-      if (activeRef.current) {
-        setTerminalAtBottom(true);
-        setScrollActiveToBottom(() => {});
-      }
-    };
-  }, [setTerminalAtBottom, setScrollActiveToBottom]);
-
   const writeSelection = useCallback((mode: "trimmed" | "raw") => {
     const term = termRef.current;
     if (!term) return;
@@ -876,20 +862,26 @@ export default function TerminalView({ sessionId, active }: Props) {
     setContextMenu({ x: e.clientX, y: e.clientY });
   }, []);
 
-  const handleToggleAutoFollow = useCallback(() => {
-    const next = !autoFollowRef.current;
-    autoFollowRef.current = next;
-    setIsAutoFollow(next);
-    if (next) {
-      const term = termRef.current;
-      if (term) {
-        fitRef.current?.fit();
-        term.scrollToBottom();
-        isAtBottomRef.current = true;
-        setIsAtBottom(true);
+  // Surface the capture state and its escape hatch to the status bar, but only
+  // while this is the visible terminal.
+  useEffect(() => {
+    if (!active) return;
+    setTerminalMouseCaptured(mouseCaptured);
+    setReleaseActiveMouse(releaseMouse);
+  }, [active, mouseCaptured, releaseMouse, setTerminalMouseCaptured, setReleaseActiveMouse]);
+
+  // On unmount, if this was the active terminal, clear the status-bar state so
+  // it does not point at a disposed terminal. (Tab switches do not unmount —
+  // the deactivating terminal stays mounted but hidden — so this only fires
+  // when the active session is actually closed.)
+  useEffect(() => {
+    return () => {
+      if (activeRef.current) {
+        setTerminalMouseCaptured(false);
+        setReleaseActiveMouse(() => {});
       }
-    }
-  }, []);
+    };
+  }, [setTerminalMouseCaptured, setReleaseActiveMouse]);
 
   return (
     <div
@@ -915,18 +907,6 @@ export default function TerminalView({ sessionId, active }: Props) {
           {imagePasteMsg}
         </div>
       )}
-      {/* Auto-follow toggle - top right */}
-      <button
-        onClick={handleToggleAutoFollow}
-        className={`absolute top-2 right-4 z-50 px-2 py-1 rounded text-[10px] font-medium border shadow-sm transition-colors cursor-pointer ${
-          isAutoFollow
-            ? "bg-[#1a2332] text-[#3fb950] border-[#238636] hover:bg-[#1f2d3d]"
-            : "bg-[#1f2937] text-[#8b949e] border-[#30363d] hover:bg-[#2d3748]"
-        }`}
-        title={isAutoFollow ? "Auto-scrolling to latest output (click to pause)" : "Auto-scroll paused (click to resume)"}
-      >
-        {isAutoFollow ? "▼ Following" : "▽ Paused"}
-      </button>
       {/* Padding lives on this wrapper, NOT on the xterm host element. xterm's
           FitAddon measures the host element it's mounted into; padding there
           causes the grid to overhang and clip the rightmost column / bottom

app/src/lib/dropTarget.test.ts

@@ -243,11 +243,12 @@ describe("dropTarget", () => {
   describe("chrome over a pane, with no dialog open", () => {
     /** Everything that is painted over a pane and is not a blocker. */
     const CHROME: Array<[string, () => HTMLElement]> = [
-      // `TerminalView`'s "▼ Following / ▽ Paused" toggle: `absolute top-2
-      // right-4 z-50`, rendered unconditionally, and a *sibling* of the xterm
-      // host — so "does the pane contain what is painted here?" made the
-      // terminal's top-right corner a dead zone no user action could clear.
-      ["the Following/Paused toggle", () => document.createElement("button")],
+      // `TerminalView`'s mouse-release badge: `absolute top-2 right-4 z-50`,
+      // and a *sibling* of the xterm host — so "does the pane contain what is
+      // painted here?" made the terminal's top-right corner a dead zone no
+      // user action could clear. (The retired Following toggle held the same
+      // corner and produced the original bug.)
+      ["the mouse-release badge", () => document.createElement("button")],
       // `ToastHost`: `fixed bottom-4 right-4 z-[60]`, 24rem wide, over every
       // pane, and its error cards stay until dismissed.
       ["a toast card", () => document.createElement("div")],

app/src/lib/dropTarget.ts

@@ -26,8 +26,8 @@
  *
  * - Asking `el.contains(document.elementFromPoint(x, y))` — "is the thing
  *   painted here mine?" — refused drops onto anything painted *over* a pane
- *   that is not part of it: `TerminalView`'s always-rendered "▼ Following"
- *   toggle (a sibling of the xterm host), the URL toast, `ToastHost`'s stack.
+ *   that is not part of it: `TerminalView`'s mouse-release badge (a sibling
+ *   of the xterm host), the URL toast, `ToastHost`'s stack.
  *   Permanent dead zones no user action could clear.
  * - Replacing that with "is a *blocking overlay* painted here?" removed the
  *   dead zones and opened a hole instead. `elementFromPoint` returns the

app/src/lib/tauri-commands.ts

@@ -350,8 +350,8 @@ export const sweepClaudeTokenSnapshots = () =>
 // without deleting its volumes. Reset is the destructive alternative: it wipes
 // ~/.claude, the OAuth credential, installed skills and every transcript.
 //
-// Flow: getContainerStaleness (read-only, ~6s — two filesystem probes, so call
-// it on demand rather than polling) → migrateProjectToBase → the project sits
+// Flow: getContainerStaleness (~6s — two filesystem probes, so call it on demand
+// rather than polling) → migrateProjectToBase → the project sits
 // in "awaiting-confirmation" while the user tries it → confirmMigration or
 // rollbackMigration.
 //
@@ -361,7 +361,19 @@ export const sweepClaudeTokenSnapshots = () =>
 //
 // Progress arrives on the existing `container-progress` event.
 
-/** Read-only. Runs two container/image filesystem probes; not for polling. */
+/**
+ * Runs two container/image filesystem probes; not for polling.
+ *
+ * **Not read-only, despite only reporting.** When the container is *stopped*
+ * the backend has to commit its writable layer to a throwaway image before it
+ * can read anything — `docker exec` needs a running container — so this writes
+ * (and then removes) an image. The result is cached per stop, so repeat calls
+ * while the container stays stopped are cheap, but the first one after each stop
+ * pays for a commit of the whole layer: seconds on a small project, tens of
+ * seconds on a large one. Do not add a caller that fires more often than "the
+ * container settled into a new state" without re-reading
+ * `get_container_staleness`'s doc comment first.
+ */
 export const getContainerStaleness = (projectId: string) =>
   invoke<ContainerStaleness>("get_container_staleness", { projectId });
 

app/src/store/appState.ts

@@ -205,16 +205,20 @@ interface AppState {
   // UI state
   terminalHasSelection: boolean;
   setTerminalHasSelection: (has: boolean) => void;
+  // Whether a program in the active terminal is holding mouse reporting open,
+  // and how to take it back. Surfaced so the release control can live in the
+  // status bar: painted over the terminal it would sit on top of whatever TUI
+  // is asking for the mouse, and swallow clicks aimed at that program's own
+  // top-right corner for as long as it ran. Only the active TerminalView
+  // writes these.
+  terminalMouseCaptured: boolean;
+  setTerminalMouseCaptured: (captured: boolean) => void;
+  releaseActiveMouse: () => void;
+  setReleaseActiveMouse: (fn: () => void) => void;
   // STT toggle for the active session, registered by App so the terminal's
   // Ctrl+Shift+M shortcut can trigger the single status-bar mic instance.
   sttToggle: () => void;
   setSttToggle: (fn: () => void) => void;
-  // Active terminal scroll state, surfaced so the status bar can host the
-  // "Jump to Current" control. Only the active TerminalView writes these.
-  terminalAtBottom: boolean;
-  setTerminalAtBottom: (v: boolean) => void;
-  scrollActiveToBottom: () => void;
-  setScrollActiveToBottom: (fn: () => void) => void;
   sidebarView: "projects" | "settings";
   setSidebarView: (view: "projects" | "settings") => void;
   sidebarCollapsed: boolean;
@@ -496,12 +500,12 @@ export const useAppState = create<AppState>((set) => ({
   // UI state
   terminalHasSelection: false,
   setTerminalHasSelection: (has) => set({ terminalHasSelection: has }),
+  terminalMouseCaptured: false,
+  setTerminalMouseCaptured: (captured) => set({ terminalMouseCaptured: captured }),
+  releaseActiveMouse: () => {},
+  setReleaseActiveMouse: (fn) => set({ releaseActiveMouse: fn }),
   sttToggle: () => {},
   setSttToggle: (fn) => set({ sttToggle: fn }),
-  terminalAtBottom: true,
-  setTerminalAtBottom: (v) => set({ terminalAtBottom: v }),
-  scrollActiveToBottom: () => {},
-  setScrollActiveToBottom: (fn) => set({ scrollActiveToBottom: fn }),
   sidebarView: "projects",
   setSidebarView: (view) => set({ sidebarView: view }),
   sidebarCollapsed: loadSidebarCollapsed(),

container/entrypoint.sh

@@ -639,8 +639,14 @@ fi
 # any terminal session launches `claude`. Runs as the claude user (the CLI is
 # installed under /home/claude/.claude/bin). Non-fatal and time-bounded so a
 # slow or offline network never blocks container readiness.
+# The lock is shared with the per-session update that every Claude terminal
+# runs before `exec claude` (commands/terminal_commands.rs, UPDATE_PRELUDE).
+# "Container ready" is printed *after* this finishes, so a user who starts a
+# project and immediately opens a tab would otherwise have two updaters
+# rewriting ~/.claude/bin at once, and the session's `|| echo` would hide the
+# damage right before it ran the result.
 echo "entrypoint: checking for Claude Code updates..."
-timeout 120 su -s /bin/bash claude -c 'export PATH="/home/claude/.claude/bin:/home/claude/.local/bin:$PATH"; claude update' \
+timeout 120 su -s /bin/bash claude -c 'export PATH="/home/claude/.claude/bin:/home/claude/.local/bin:$PATH"; flock -w 90 -E 0 /tmp/.triple-c-claude-update.lock claude update' \
     && echo "entrypoint: Claude Code is up to date" \
     || echo "entrypoint: warning — Claude Code update skipped or failed (continuing)"