Conflicting Error Code Bump (#6002)

* Bump up the error code for InvalidListToken such that it does not conflict with the error code Paused

* chore: reorder the errors and give 136 to InvalidListToken over Pausedx

* chore(errors): Add missing tests and err info

---------

Co-authored-by: Louis Ruch <louisruch@gmail.com>

internal/errors/code.go

@@ -43,32 +43,31 @@ const (
 	InvalidDynamicCredential      Code = 116 // InvalidDynamicCredential represents that a dynamic credential for a session was in an invalid state
 	JobAlreadyRunning             Code = 117 // JobAlreadyRunning represents that a Job is already running when an attempt to run again was made
 	SubtypeAlreadyRegistered      Code = 118 // SubtypeAlreadyRegistered represents that a value has already been registered in the subtype registry system.
-	NoPathFound                        = 119 // NoPathFound represents an error when no path is found to a worker
-	WorkerNotFound                     = 120 // WorkerNotFound represents an error when a worker is not found in the graph of downstream workers
-	CycleFound                         = 121 // CycleFound represents an error when a cycle is found between a parent and child worker
-	WorkerConnNotFound                 = 122 // WorkerConnNotFound represents an error when a connection to a worker is not found
-	KmsWorkerUnsupportedOperation      = 123 // KmsWorkerUnsupportedOperation represents an error when a KMS worker is not supported for an operation
+	NoPathFound                   Code = 119 // NoPathFound represents an error when no path is found to a worker
+	WorkerNotFound                Code = 120 // WorkerNotFound represents an error when a worker is not found in the graph of downstream workers
+	CycleFound                    Code = 121 // CycleFound represents an error when a cycle is found between a parent and child worker
+	WorkerConnNotFound            Code = 122 // WorkerConnNotFound represents an error when a connection to a worker is not found
+	KmsWorkerUnsupportedOperation Code = 123 // KmsWorkerUnsupportedOperation represents an error when a KMS worker is not supported for an operation
 
 	// Note: Currently unused in OSS
-	RetryLimitExceeded = 124 // RetryLimitExceeded represents an error when a retry limit is exceeded
+	RetryLimitExceeded Code = 124 // RetryLimitExceeded represents an error when a retry limit is exceeded
 	// Note: Currently unused in OSS
-	QueueIsFull = 125 // QueueIsFull results in attempting to add an item to a queue which is full
+	QueueIsFull Code = 125 // QueueIsFull results in attempting to add an item to a queue which is full
 
 	// Note: Storage errors are currently unused in OSS
-	StorageFileClosed         = 126 // StorageFileClose represents an error when a file has been closed and a read/write operation is attempted on it
-	StorageContainerClosed    = 127 // StorageContainerClosed represents an error when a container has been closed and a I/O operation is attempted on it
-	StorageFileReadOnly       = 128 // StorageFileReadOnly represents an error when a file is readonly and a write operation is attempted on it
-	StorageFileWriteOnly      = 129 // StorageFileWriteOnly represents an error when a file is write only and a read operation is attempted on it
-	StorageFileAlreadyExists  = 130 // StorageFileAlreadyExists represents an error when a file already exists during an attempt to create it
-	StorageContainerReadOnly  = 131 // StorageContainerReadOnly represents an error when a container is readonly and a write operation is attempted on it
-	StorageContainerWriteOnly = 132 // StorageContainerWriteOnly represents an error when a container is write only and a read operation is attempted on it
+	StorageFileClosed         Code = 126 // StorageFileClose represents an error when a file has been closed and a read/write operation is attempted on it
+	StorageContainerClosed    Code = 127 // StorageContainerClosed represents an error when a container has been closed and a I/O operation is attempted on it
+	StorageFileReadOnly       Code = 128 // StorageFileReadOnly represents an error when a file is readonly and a write operation is attempted on it
+	StorageFileWriteOnly      Code = 129 // StorageFileWriteOnly represents an error when a file is write only and a read operation is attempted on it
+	StorageFileAlreadyExists  Code = 130 // StorageFileAlreadyExists represents an error when a file already exists during an attempt to create it
+	StorageContainerReadOnly  Code = 131 // StorageContainerReadOnly represents an error when a container is readonly and a write operation is attempted on it
+	StorageContainerWriteOnly Code = 132 // StorageContainerWriteOnly represents an error when a container is write only and a read operation is attempted on it
 
-	WorkerNotFoundForRequest = 133 // WorkerNotFoundForRequest represents an error when no appropriate worker is found which meets the conditions required to handle a request
-	Closed                   = 134 // Closed represents an error when an operation cannot be completed because the thing being operated on is closed
-	ChecksumMismatch         = 135 // ChecksumMismatch represents an error when a checksum is mismatched
-	Paused                   = 136 // Paused represents an error when an operation cannot be completed because the thing being operated on is paused
-
-	InvalidListToken Code = 136 // InvalidListToken represents an error where the provided list token is invalid
+	WorkerNotFoundForRequest Code = 133 // WorkerNotFoundForRequest represents an error when no appropriate worker is found which meets the conditions required to handle a request
+	Closed                   Code = 134 // Closed represents an error when an operation cannot be completed because the thing being operated on is closed
+	ChecksumMismatch         Code = 135 // ChecksumMismatch represents an error when a checksum is mismatched
+	InvalidListToken         Code = 136 // InvalidListToken represents an error where the provided list token is invalid
+	Paused                   Code = 137 // Paused represents an error when an operation cannot be completed because the thing being operated on is paused
 
 	AuthAttemptExpired Code = 198 // AuthAttemptExpired represents an expired authentication attempt
 	AuthMethodInactive Code = 199 // AuthMethodInactive represents an error that means the auth method is not active.

internal/errors/code_test.go

@@ -300,6 +300,11 @@ func TestCode_Both_String_Info(t *testing.T) {
 			c:    VaultInvalidCredentialMapping,
 			want: VaultInvalidCredentialMapping,
 		},
+		{
+			name: "VaultTokenMissingCapabilities",
+			c:    VaultTokenMissingCapabilities,
+			want: VaultTokenMissingCapabilities,
+		},
 		{
 			name: "OidcProviderCallbackError",
 			c:    OidcProviderCallbackError,
@@ -425,6 +430,36 @@ func TestCode_Both_String_Info(t *testing.T) {
 			c:    InvalidTextRepresentation,
 			want: InvalidTextRepresentation,
 		},
+		{
+			name: "Sign",
+			c:    Sign,
+			want: Sign,
+		},
+		{
+			name: "Verify",
+			c:    Verify,
+			want: Verify,
+		},
+		{
+			name: "Unauthorized",
+			c:    Unauthorized,
+			want: Unauthorized,
+		},
+		{
+			name: "Conflict",
+			c:    Conflict,
+			want: Conflict,
+		},
+		{
+			name: "Paused",
+			c:    Paused,
+			want: Paused,
+		},
+		{
+			name: "ImmutableColumn",
+			c:    ImmutableColumn,
+			want: ImmutableColumn,
+		},
 	}
 	for _, tt := range tests {
 		t.Run(tt.name, func(t *testing.T) {

internal/errors/info.go

@@ -267,6 +267,10 @@ var errorCodeInfo = map[Code]Info{
 		Message: "purposefully aborted without error",
 		Kind:    Other,
 	},
+	ImmutableColumn: {
+		Message: "immutable column",
+		Kind:    Integrity,
+	},
 	UnexpectedRowsAffected: {
 		Message: "unexpected number of rows affected",
 		Kind:    Integrity,
@@ -339,6 +343,10 @@ var errorCodeInfo = map[Code]Info{
 		Message: "closed",
 		Kind:    State,
 	},
+	Paused: {
+		Message: "paused",
+		Kind:    State,
+	},
 	ExternalPlugin: {
 		Message: "plugin error",
 		Kind:    External,