Originally, UpstreamMessageHandler was used by
controllerUpstreamMessageServiceServer.UpstreamMessage to process
(aka handle) an upstream message and by SendUpstreamMessage to
send an upstream msg.
We split UpstreamMessageHandler into two interfaces so we can
register handlers independently of a senders.
The upstream messages all basically looked the same; regardless
of which message was sent. This PR adds DetailsUpstreamMessage to
audit events emitted by UpstreamMessage requests/response
Stop returning an error if RegisterUpstreamMessageHandler is called
multiple times, since it provides little/no value and creates
invalid errors when more than one test controller is started across
all the unit tests.
Define OSS protos for UpstreamMessageService rpc which defines a way
to send an upstream message to a controller (across multi-hops if
needed).
Implement OSS versions of both workers and controllers for the
UpstreamMessageService. The upstream requests/responses are encrypted
using the originating worker's NodeCredential's key.
The worker always forwards the request upstream.
The controller attends to find a registered UpstreamMessageHandler to
handle the msg; if none if found, then an Unimplemented status error
is returned.
This commit fixes the behaviour of scopes where whitespace was allowed
(and thus persisted) in the Name and Description fields.
It also adds some more tests for scope Create and Updateto cover more
error cases.
For scope update, `handlers.ValidateUpdateRequest` exists, however this
was not used as it does not work properly for requests where the
`global` scope is updated.
In `ValidateUpdateRequest`, an ID check is performed and it assumes
there's always a resource prefix (eg: "p", "o") and an identifier
(random numbers and letters) after the prefix. This fails for `global`.
See `handlers.ValidId`.
Most of the changes here are changes or enhancements that are useful for
tests. The crux of the issue was that I had pulled up one var to the
package level so it could be read from tests, but that var was not being
reset between tests. It's not even used in tests anymore, so I put it
back to function-local.
* Add more logging to worker auth rotation and test flags
This makes it much easier to figure out when and why rotation is
happening and control it for tests/debugging.
* Update auth rotation logic
Because we were looking at validity period of client certs, which may
not have matched the actual rotation interval, it was possible (mostly
in test scenarios) for the rotation to happen multiple times on the
roots before we actually hit the worker rotation interval.
This changes how the interval is calculated by looking at the difference
between not-after values on the certs to understand the rotation
interval being used by the controller. We then use that as the starting
point for calculating a next-rotation time.
This makes it much easier to figure out when and why rotation is
happening and control it for tests/debugging.
Remove cert skew
Cherry-picked from release/0.12.x
Do not allow PKI-KMS workers to have names updated via API
This would cause their public IDs to change, which we do not want.
Descriptions are also disallowed, since those come from the config file.
This also adds logic to allow upgrading from old KMS method to new, with
a test.
Co-authored-by: Irena Rindos <irenarindos@users.noreply.github.com>
This adds a new mechanism for worker authentication that uses the
third-party arbitration of the original KMS flow by leveraging
recently-added capabilities in nodeenrollment to support a registration
wrapper. This allows for workers to be registered to the system with
just a name and a matching wrapper, while at the same time allowing
these workers to be used for private Vault access and multi-hop as they
contain per-worker encryption keys and support rotation.
Nodes using this mode will generate and rotate credentials in-memory
(using another recently added nodeenrollment capability) so will have a
new set of keys on every startup. This has the side effect of ensuring
that there is never a conflict or re-use of these credentials.
Note that the normal test worker flow was using the now-deprecated KMS
method; there is still a test that uses this (explicitly) but all other
tests using test workers that did not specify a specific PKI flow now
actually use this mechanism. This means there is fairly decent test
coverage in a general sense, plus the specific tests updated/added for
this feature.
This also adds a new KMS type that can be used to have
distinct KMSes for upstream authentication vs. accepting from
downstream.
- Refactor the Target domain repository functions so that they no longer return 4 different types.
`Target` struct now contains `HostSource` & `CredentialSources` with Getters & Setters
- Extending `Target` to contain `HostSource` & `CredentialSources` enables `funcs` to just return `Target` instead of multiple return types.
This also allows easy future refactors and extensions of `Target`
This adds several relationships into the resource package that are then
made use of to improve the grant validation that runs during Parse. By
understanding mappings between ID and resource type the validation
checks can far better align with actual allowed grant formats so we can
find several common misunderstandings before they simply result in an
authorization failure.
In the future some of these functions could be used in the logic in the
actual ACL checks but it's not currently necessary and I don't want to
lump that change in with this.
Note that the tests have not meaningfully changed, but they _have_ had
to be updated because the stricter validation is actually catching
issues.
* feature (auth): required schema changes for auth ldap method (#2669)
chore (auth/ldap): move schema changes to next avail migration number
* feature (auth/ldap): define AuthMethod and all its value objects (#2703)
* feature (auth/ldap): storage protos
* feature (auth/ldap): define AuthMethod and all its value objects
* feature (auth/ldap): add repo and reading an auth method (#2718)
* feature (auth/ldap): add Repository.CreateAuthMethod(...) and Repository.DeleteAuthMethod(...) (#2724)
* feature (auth/ldap): add Repository.UpdateAuthMethod(...) (#2739)
* feature (auth/ldap): add Account
* feature (auth/ldap): add AuthMethod.EnableGroups
* fix (auth/ldap): refactor AuthMethod.oplog to enforce proper constraints
* feature (auth/ldap): add Account repo functions
* refactor (auth/ldap): remove entry attributes from account
Realized the entry attributes could have absolutely anything in them
(including binary data) and since we absolutely don't have to have them
there's just no reason to take on the risk.
* feature (auth/ldap): add AuthMethod.UseTokenGroups
* feature (auth/ldap): add Authenticate(...)
* refactor (auth/ldap): ensure options take a context as the 1st parameter
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): make fmt deltas
* feature (auth/ldap): add managed groups (#2760)
* tests (auth/ldap): add missing unit test to Repository.DeleteAccount(...)
Add bits to test the delete operation when you're not able to generate
oplog metadata
* feature (auth/ldap): add managed groups
fixup! feature (auth/ldap): add managed groups (#2760)
* feature (auth/ldap): service proto definition (#2761)
* feature (handlers/authmethods): add handlers for ldap auth method operations (#2794)
* feature (auth/ldap): add Account attribute maps
* chore (auth/ldap): update cap/ldap to latest version
* feature (auth/ldap): add ldap api generation definitions
* feature (authmethods): add ldap repo NewService(...)
* feature (authmethods/ldap): add proper mask_mapping to protobufs
* feature (authmethods): add support to get an ldap auth method
* refactor (auth/ldap): export TestGenerateCA(...)
* feature (authmethods): add support to create an ldap auth method
* feature (authmethods): add support to delete an ldap auth method
* feature (authmethods): add support to list ldap auth methods
* refactor (auth/ldap): make urls optional for NewAuthMethod(...)
* refactor (auth/ldap): export ldap.TestInvalidPem
* chore: make fmt changes
* fix (auth/ldap): properly handle group search config
Add constraints and tests to ensure when an ldap AuthMethod.EnableGroups
is true, and UseTokenGroups is false; that there's a GroupDn configured
for finding a user's associated groups
* feature (authmethods): add support to update an ldap auth methods
* chore (db/ldap): tmp mv migrations so there's no conflict with ongoing work
* feature (verifier): add ldap auth method to verifier bits
* fix (controller): prevent panic when controller stops when there's no listener
* feature (authmethods): add support to authenticate via ldap auth methods
* chore (migrations): fix whitespace in stmt
* chore: fmt fixup
* tests (auth/ldap): invalid err msg
* feature (cli/authmethods): add support for ldap auth-methods CRUD and authenticate (#2810)
* feature (authmethods): add CLI support for ldap auth methods CRUD
* tests (api/auth): ldap auth method classification tests
* feature (authmethods): add CLI support for ldap auth authenticate
* feature (auth/ldap): set request timeouts for ldap server connections
* feature (handlers/authmethods): handle u_anon listing properly.
* feature (account/handers): ldap account and managed group CRUDL APIs (#2852)
* feature (auth/ldap) add repository Listing of ManagedGroupMemberAccount
* feature (controller/handlers): add ldapRepoFn to accounts service
* feature (auth/ldap) register ldap managed group subtype
* feature (account/handlers): ldap account CRUDL APIs
* feature (controller/handlers): add ldapRepo to managed groups service
* feature (account/handlers): ldap managed group CRUDL APIs
* docs (domain): add LDAP accounts, auth-methods and managed groups (#2857)
* feature (ldap/cli) add ldap accounts and managed groups CRUDL commands (#2856)
* fix (handlers/authmethods): fix ldap authorized actions (#2892)
* feature (cli/ldap/authenticate): use primary auth method if none is provided (#2890)
* fix (auth/ldap): support setting the state attribute
* feature (cli/ldap/authenticate): use primary auth method if none is provided
* feature (wh/ldap) add tests for new ldap auth method and accounts (#2919)
* refactor (migrations/ldap): mv to correct directory
* chore: add copyright headers
* fix (api/authmethods/ldap): renumber new LdapAuthMethodAttributes field
* fix (auth/ldap): allow the auth method state to be updated (#2951)
* chore: update sdk and api versions for llb - this is tmp until merging
* tests (managed groups): add required errContains for new test
Louis Ruch
Damian Debkowski
Todd
Jim
Johan Brandhorst-Satzkorn
Michael Milton
Jeff Mitchell
Hugo
Elim Tsiagbey
Haotian