* Remove the server_id from session table, change it to worker_id on session_connection
This is step 1 in updating the worker table. The worker is becoming a public resource so it must have
a public id. We drop the server_id column on the session_connection table and add the worker_id column
so we can use the wt_public_key type. Since db migrations are applied while the controller is offline,
it should be safe to assume all session connections are not in a running state, thus allowing us to null
out all the worker ids in the session_connection table.
For now we don't have very good enforcement of the wt_public_id contraints, since the id is currently
defined in the worker config, but this will soon change and the worker's id will be generated by the
controller.
* Updating server_id references to controller_id.
* Adding worker tag db writing test.
* Move the server table back to the top.
* Update comment for the worker object.
* Update comment for the worker table.
* Update the newWorkerId call to take a context and fix its error.
* Correct comment for the wt_network_address domain.
* Remove the server_id from session table, change it to worker_id on session_connection
This is step 1 in updating the worker table. The worker is becoming a public resource so it must have
a public id. We drop the server_id column on the session_connection table and add the worker_id column
so we can use the wt_public_key type. Since db migrations are applied while the controller is offline,
it should be safe to assume all session connections are not in a running state, thus allowing us to null
out all the worker ids in the session_connection table.
For now we don't have very good enforcement of the wt_public_id constraints, since the id is currently
defined in the worker config, but this will soon change and the worker's id will be generated by the
controller.
* feature (db): add Db.UnderlyingDB()
This is needed to allow for integration with bits that need a *dbw.DB
* feature (kms): add new go-kms-wrapping/extras/kms dependency
* refactor (kms): schema changes required to adopt extras/kms pkg
* refactor (kms/iam): rename to DeprecateCreateKeysTx(...)
* refactor (kms): remove deprecated test
* refactor (kms): refactor Kms type
This refactor includes renaming the existing type to DeprecatedKms
and then refactoring the Kms type to become a wrapper of
go-kms-wrapping/extras/kms
* refactor (kms): delete all the unneeded bits
All this stuff is not needed now that we're using
go-kms-wrapping/extras/kms
* refactor (db): fixup tests after kms refactor
* refactor (kms/tests): use testing.TB for test helpers
Our test helper packages were not possible to use
with benchmarks. This refactor switches to testing.TB
to allow both tests and benchmarks to use the helpers.
* tests (session benchmarks): refactor to use new Kms type
* refactor (schema): rm test which relies on deprecated Kms code
* refactor (kms): post rebase on main changes required
* chore (kms refactor): re-add unit test from main
* refactor (kms): uses migrations that don't include KMS schema changes
* Move the server daemons into their own package
With this change the internal/server package now is dedicated to the server domain (workers and controllers) and not to the server daemons.
The hope is that this will make it easier to keep the daemons decoupled from the representation of the servers in the database.
* fix(cmd): Add profiling build imports
It seems like this file has been bitrotted since last used,
and it was missing some imports. This was discovered
by running goimports on the code.
* Add build-memprof Makefile target
The wrapper is sometimes unset at the time when the
audit config is validated, so it is impossible for us
to validate that a valid wrapper is configured. The wrapper
is configured by later setup steps because of a dependency
on the eventer in our KMS setup.
This reduces the chance that we'll hit a failure due to a mismatched
worker address, on the certificate, especially if a worker has multiple
addresses. We aren't relying on IP/DNS for security anyways, so let's
not have it be a hindrance.
Since we call base.NewServer multiple times when building the Commands map this was returning
an error "duplicate metrics collector registration attempted". This PR only creates a single
server which is used for both the "server" command as well as "dev".
Adds a Prometheus gauge metric set to the value of 1, with labels for go version, git revision, and Boundary version.
Assigns the Prometheus DefaultRegisterer to the Server struct as a parameter to NewServer(), to avoid "duplicate metrics collector registration" panics from test cases.
It is documented as illegal to use t.FailNow in a goroutine.
Uses of require assertions call t.FailNow. This may have led to
inconsistent test results as some assertions were subject to
undefined behavior. Note that it is still allowed to call
assert assertions in goroutines.
See: https://pkg.go.dev/testing#T.FailNow
* Pull up Server to top level of Init command
Init was using a local server variable but not passing in the existing
command, resulting in the context being lost. This caused the command to
fail to run since the changes to add logging to KMS plugins were
introduced.
This also fixes a couple of places that were not using the global const
value for config KMS.
* Fix test compilation
This allows us to use SNI for actual host (e.g. routing) information. We
don't have the client cert yet so we can't look at that, so this
provides a way for us to convey the information needed to look up that
session's TLS stack.
Using SNI for hosts means we also run into the fact that we don't have
automatic agreement in terms of SANs. So when generating the certs we
now also pass worker address information to the function to be encoded
in the cert.
Finally, there is a change in how the websocket dialing happens, because
http.RoundTripper tries to be too clever for its own good and overwrites
NextProtos on a whim.
We never ended up using this and it makes it much harder to reason about the listeners.
An explanation: for the moment I separated out all of the listeners in the struct, even though one should suffice, because when I did it that way first I was hitting some really weird and hard to find intermittent behavior where it seemed like the listeners were getting crossed. So I re-did it this way with each listener very explicitly referenced. I'm happy to make a follow-up PR that attempts to combine them all into a single listener without hitting the issues I did, if desired, but at least doing it via a separate PR means that it won't be something with removing the ALPN muxer that is at fault.
* feat(controller): New health service and server
This change also implements a new listener purpose, `ops`.
`ops` (short for operations) is a new listener purpose that is
responsible for serving Boundary's operations endpoints, like health
and possibly metrics.
At Startup: `ops` listeners get configured as late as possible to catch
any errors with the startup process;
At Shutdown: If the health endpoint has been set-up, we introduce a
configurable delay in the process. This is to enable the health endpoint
to report unhealthy for that amount of time. `ops` listeners are also
the last listeners to be shutdown.
In general, these changes were introduced in the same vein of the
changes to controller `startListeners`.
Specifically, these changes also decouple the Controller and the Worker
shutdown processes. Currently, a call to `stopListeners` on an instance
that is running as both a Controller and a Worker would stop the
listeners for both.
Lastly, we also add unit/integration tests to the shutdown code.
This contains to related things:
1. An adapter allowing an hclog interface to take in information and send them to the eventer
2. A gate on the eventer, which is the analogue to the behavior prior to eventing where we'd ensure logs were not printed prior to the startup information. Without this, plugin logs using the hclog adapter will start showing up too early.
Passthrough args looks for the an instance of -- and re-slices the arg
list to pass through those args to the underlying connect exec command.
However such commands may also need to parse their own '--', such as
kubectl exec.
This change updates the logic so that boundary arg parser only considers
the first instance of '--' when deciding which args to pass to the
-exec= commands.
Fixes: #1857
* Make it clear in the subcommands that the given strings are examples
* Add an OIDC example to show that there are different types
* Remove password flag from examples
* chore: Add new dbw dependency
* refactor: Convert to use dbw.DB
* refactor (db): Change GetTicket(...) signature
* feature (db tests): Added TestDeleteWhere(...)
Adding this allows us to eliminate a leak of the gorm library
* refactor: Add ctx to ScanRows(...) signature
This is required to refactor all the deprecated errors pkg calls.
This refactor required adding a context to quite a few call chains
and in particular the job scheduler bits
* feature (db/tests): Add support for test opt: WithTestLogLevel(...)
This test only option allows callers to specify a log level for the
underlying db package (where supported/applicable) when calling
TestSetup(...)
* refactor (db): Simplify Db type
Only store the underlying *DB and create the *RW on demand when
needed.
* refactor (oplog): Port to using dbw pkg for db operations
* refactor (db): Remove gormDB(...) func
* tests (db): Add unit tests for TestDeleteWhere(...)
* chore: make fmt changes to formatting
* feat(sdk): Add fields to credential library proto
Adds CredentialType and CredentialMappingOverrides to credential
library SDK.
* feat(api): Add fields to credenttial library service
Adds support for CredentialType and CredentialMappingOverrides
to the credential library service (API)
* feat(cli): Add feilds for credential library cmd
Adds support for CredentialType and CredentialMappingOverrides to the
credential library cmd command.
This feature allows the user to set the `controllers` field to a string
that points to either an environment variable or file.
We then dynamically pull out the value and parse it into the config.
This feature allows the user to set the `tags` field to a string
that points to either an environment variable or file.
We then dynamically pull out the value and parse it into the config.
This can also be done at the keys level, where you set your keys
directly in Boundary's config file, but point the values to env/file.
Jim
Jeff Mitchell
Todd
Haotian
irenarindos
Johan Brandhorst-Satzkorn
Timothy Messier
Justen Walker
Louis Ruch
Irena Rindos
Irena Rindos