CyberCoveLLC/threshold
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
e41ffb0b28e439d25a05dfc6fccff07fbdf74a12
threshold/CHANGELOG.md
T

650 lines
33 KiB
Markdown
Raw Blame History

# Boundary CHANGELOG
Canonical reference for changes, improvements, and bugfixes for Boundary.
## Next
## 0.4.0 (2021/06/29)
### New and Improved
* Credential Stores: This release introduces Credential Stores, with the first
implementation targeting Vault. A credential store can be created that accepts
a Vault periodic token (which it will keep refreshed) and connection
information allowing it to make requests to Vault.
* Credential Libraries: This release introduces Credential Libraries, with the
first implementation targeting Vault. Credential libraries describe how to
make a request to fetch a credential from the credential store. The first
credential library is the `generic` type that takes in a user-defined request
body to send to Vault and thus can work for any type of Vault secrets engine.
When a credential library is used to fetch a credential, if the credential
contains a lease, Boundary will keep the credential refreshed, and revoke the
credential when the session that requested it is finished.
* Credential Brokering: Credential libraries can be attached to targets; when a
session is authorized against that target, a credential will be fetched from
the library that is then relayed to the client. The client can then use this
information to make a connection, allowing them to gain the benefit of dynamic
credential generation from Vault, but without needing their own Vault
login/token (see NOTE below).
* `boundary connect` Credential Brokering Integration: Additionally, we have
started integration into the `boundary connect` helpers, starting in this
release with the Postgres helper; if the credential contains a
username/password and `boundary connect postgres` is the helper being used,
the command will automatically pass the credentials to the `psql` process.
* The worker will now close any existing proxy connections it is handling when
it cannot make a status request to the worker. The timeout for this behavior
is currently 15 seconds.
NOTE: When using credential brokering, remember that if the user can connect
directly to the end resource, they can use the brokered username and password
via that direct connection to skip Boundary. This isn't any different from
normal Boundary behavior (if a user can directly connect, they can bypass
Boundary) but it's worth repeating.
### Bug Fixes
* scheduler: removes a Postgres check constraint, on the length of the controller name,
causing an error when the scheduler attempts to run jobs
([issue](https://github.com/hashicorp/boundary/issues/1309),
[PR](https://github.com/hashicorp/boundary/pull/1310)).
* Docker: update entrypoint script to handle more Boundary subcommands for
better UX
## 0.3.0 (2021/06/08)
### Deprecations/Changes
* `password` account IDs: When the `oidc` auth method came out, accounts were
given the prefix `acctoidc`. Unfortunately, accounts in the `password` method
were using `apw`...oops. We're standardizing on `acct` and have updated the
`password` method to generate new IDs with `acctpw` prefixes.
Previously-generated prefixes will continue to work.
### New and Improved
* oidc: The new Managed Groups feature allows groups of accounts to be created
based on an authenticating user's JWT or User Info data. This data uses the
same filtering syntax found elsewhere in Boundary to provide a rich way to
specify the criteria for group membership. Once defined, authenticated users
are added to or removed from these groups as appropriateds each time they
authenticate. These groups are treated like other role principals and can be
added to roles to provide grants to users.
* dev: Predictable IDs in `boundary dev` mode now extend to the accounts created
in the default `password` and `oidc` auth methods.
* mlock: Add a Docker entrypoint script and modify Dockerfiles to handle mlock
in a fashion similar to Vault
([PR](https://github.com/hashicorp/boundary/pull/1269))
## 0.2.3 (2021/05/21)
### Deprecations/Changes
* The behavior when `cors_enabled` is not specified for a listener is changing
to be equivalent to a `cors_allowed_origins` value of `*`; that is, accept all
origins. This allows Boundary, by default, to have the admin UI and desktop
client work without further specification of origins by the operator. This is
only affecting default behavior; if `cors_enabled` is explicitly set to
`true`, the behavior will be the same as before. This had been changed in
v0.2.1 due to a bug found in v0.2.0 that caused all origins to always be
allowed, but fixing that bug exposed that the default behavior was difficult
for users to configure to simply get up and running.
* If a `cancel` operation is run on a session already in a canceling or
terminated state, a `200` and the session information will be returned instead
of an error.
### New and Improved
* sessions: Return a `200` and session information when canceling an
already-canceled or terminated session
([PR](https://github.com/hashicorp/boundary/pull/1243))
### Bug Fixes
* cors: Change the default allowed origins when `cors_enabled` is not specified
to be `*`. ([PR](https://github.com/hashicorp/boundary/pull/1249))
## 0.2.2 (2021/05/17)
### New and Improved
* Inline OIDC authentication flow: when the OIDC authentication flow succeeds,
the third-party provider browser window is automatically closed and the user
is returned to the admin UI.
### Bug Fixes
* oidc: If provider returns an `aud` claim as a `string` or `[]string`,
Boundary will properly parse the claims JSON.
([issue](https://github.com/hashicorp/cap/issues/37),
[PR](https://github.com/hashicorp/boundary/pull/1231))
* sessions: Clean up connections that are dangling after a worker dies (is
restarted, powered off, etc.) This fixes some cases where a session never goes
to `terminated` state because connections are not properly marked closed.
([Issue 1](https://github.com/hashicorp/boundary/issues/894), [Issue
2](https://github.com/hashicorp/boundary/issues/1055),
[PR](https://github.com/hashicorp/boundary/pull/1220))
* sessions: Add some missing API-level checks when session cancellation was
requested. It's much easier than interpreting the domain-level check failures.
([PR](https://github.com/hashicorp/boundary/pull/1223))
* authenticate: When authenticating with OIDC and `json` format output, the
command will no longer print out a notice that it's opening your web browser
([Issue](https://github.com/hashicorp/boundary/issues/1193),
[PR](https://github.com/hashicorp/boundary/pull/1213))
## 0.2.1 (2021/05/05)
### Deprecations/Changes
* API `delete` actions now result in a `204` status code and no body when
successful. This was not the case previously due to a technical limitation
which has now been solved.
* When using a `delete` command within the CLI we now either show success or
treat the `404` error the same as any other `404` error, that is, it results
in a non-zero status code and an error message. This makes `delete` actions
behave the same as other commands, all of which pass through errors to the
CLI. Given `-format json` capability, it's relatively easy to perform a check
to see whether an error was `404` or something else from within scripts, in
conjunction with checking that the returned status code matches the API error
status code (`1`).
* When outputting from the CLI in JSON format, the resource information under
`item` or `items` (depending on the action) now exactly matches the JSON sent
across the wire by the controller, as opposed to matching the Go SDK
representation which could result in some extra fields being shown or fields
having Go-specific types. This includes `delete` actions which previously
would show an object indicating existence, but now show no `item` on success
or the API's `404` error.
* Permissions in new scope default roles have been updated to include support
for `list`, `read:self`, and `delete:self` on `auth-token` resources. This
allows a user to list and manage their own authentication tokens. (As is the
case with other resources, `list` will still be limited to returning tokens on
which the user has authorization to perform actions, so granting this
capability does not automatically give user the ability to list other users'
authentication tokens.)
### New and Improved
* permissions: Improving upon the work put into 0.2.0 to limit the fields that
are returned when listing as the anonymous user, grants now support a new
`output_fields` section. This takes in a comma-delimited (or in JSON format,
array) set of values that correspond to the JSON fields returned from an API
call (for listing, this will be applied to each resource under the `items`
field). If specified for a given ID or resource type (and scoped to specific
actions, if included), only the given values will be returned in the output.
If no `output_fields` are specified, the defaults are used. For authenticated
users this defaults to all fields; for `u_anon` this defaults to the fields
useful for navigating to and authenticating to the system. In either case,
this is overridable. See the [permissions
documentation](https://www.boundaryproject.io/docs/concepts/security/permissions)
for more information on why and when to use this. This currently only applies
to top-level fields in the response.
* cli/api/sdk: Add support to request additional OIDC claims scope values from
the OIDC provider when making an authentication request.
([PR](https://github.com/hashicorp/boundary/pull/1175)).
By default, Boundary only requests the "openid" claims scope value. Many
providers, like Okta and Auth0 for example, will not return the standard claims
of email and name when you request the default claims scope (openid).
Boundary uses the standard email and name claims to populate an OIDC
account's `Email` and `FullName` attributes. If you'd like these account
attributes populated, you'll need to reference your OIDC provider's documentation
to learn which claims scopes are required to have these claims returned during
the authentication process.
Boundary now provides a new OIDC auth method parameter `claims_scopes` which
allows you to add multiple additional claims scope values to an OIDC auth
method configuration.
For information on claims scope values see: [Scope Claims in the OIDC
specification](https://openid.net/specs/openid-connect-core-1_0.html#ScopeClaims)
* cli: Match JSON format output with the across-the-wire API JSON format
([PR](https://github.com/hashicorp/boundary/pull/1155))
* api: Return `204` instead of an empty object on successful `delete` operations
([PR](https://github.com/hashicorp/boundary/pull/1155))
* actions: The new `no-op` action allows a grant to be given to a principals
without conveying any actionable result. Since resources do not appear in list
results if the principal has no actions granted on that resource, this can be
used to allow principals to see values in list results without also giving
`read` or other capabilities on the resources. The default scope permissions
have been updated to convey `no-op,list` instead of `read,list`.
([PR](https://github.com/hashicorp/boundary/pull/1138))
* cli/api/sdk: User resources have new attributes for:
* Primary Account ID
* Login Name
* Full Name
* Email
These new user attributes correspond to attributes from the user's primary
auth method account. These attributes will be empty when the user has no
account in the primary auth method for their scope, or there is no designated
primary auth method for their scope.
* cli: Support for reading and deleting the user's own token via the new
`read:self` and `delete:self` actions on auth tokens. If no token ID is
provided, the stored token's ID will be used (after prompting), or `"self"`
can be set as the value of the `-id` parameter to trigger this behavior
without prompting. ([PR](https://github.com/hashicorp/boundary/pull/1162))
* cli: New `logout` command deletes the current token in Boundary and forgets it
from the local system credential store, respecting `-token-name`
([PR](https://github.com/hashicorp/boundary/pull/1134))
* config: The `name` field for workers and controllers now supports being set
from environment variables or a file on disk
([PR](https://github.com/hashicorp/boundary/pull/1181))
### Bug Fixes
* cors: Fix allowing all origins by default
([PR](https://github.com/hashicorp/boundary/pull/1134))
* cli: It is now an error to run `boundary database migrate` on an uninitalized db.
Use `boundary database init` instead.
([PR](https://github.com/hashicorp/boundary/pull/1184))
* cli: Correctly honor the `-format` flag when running `boundary database init`
([PR](https://github.com/hashicorp/boundary/pull/1204))
## 0.2.0 (2021/04/14)
### Known Issues
* By default, CORS support will allow all origins. This is due to a bug in how
the set of allowed origins was processed, in conjunction with changes to CORS
behavior to automatically include the origin of the Desktop Client. This will
be fixed in 0.2.1. In the meantime, this can be worked around by either
explicitly disabing CORS with `cors_enabled = false` in the `listener` config
block with purpose `api`; or setting a `cors_allowed_origins` field to have
values other than `serve://boundary` (including values that do not map to any
real origin).
### Deprecations/Changes
* The `auth-methods/<id>:authenticate:login` action is deprecated and will be
removed in a few releases. (Yes, this was meant to deprecate the
`authenticate` action; apologies for going back on this!) To better support
future auth methods, and especially the potential for plugins, rather than
defining custom actions on the URL path the `authenticate` action will consume
both a map of parameters but also a `command` parameter that specifies the
type of command. This allows workflows that require multiple steps, such as
OIDC, to not require custom subactions. Additionally, the `credentials` map in
the `authenticate` action has been renamed `attributes` to better match other
types of resources. `credentials` will still work for now but will be removed
in a few releases. Finally, in the Go SDK, the `Authenticate` function now
requires a `command` value to be passed in.
* Related to the above change, the output of an API
`auth-methods/<id>:authenticate` call will return the given `command` value
and a map of attributes that depend on the given command. On the SDK side, the
output of the `Authenticate` function returns a map, from which a concrete
type can be easily umarshaled (see the updated `authenticate password` command
for an example).
* Anonymous scope/auth method listing: When listing auth methods and scopes
without authentication (that is, as the anonymous user `u_anon`), only
information necessary for navigation to an auth method and authenticating to
the auth method is now output. Granting `u_anon` list access to other resource
types will not currently filter any information out.
### New and Improved
* cli/api/sdk: New OIDC auth method type added with support for create, read,
update, delete, and list (see new cli `oidc` subcommands available on CRUDL
operations for examples), as well as the ability to authenticate against it
via the SDK, CLI, admin UI, and desktop client.
([PR](https://github.com/hashicorp/boundary/pull/1090))
* server: When performing recursive listing, `list` action is no longer required
to be granted to the calling user. Instead, the given scope acts as the root
point (so only results under that scope will be shown), and `list` grant is
evaluated per-scope. ([PR](https://github.com/hashicorp/boundary/pull/1016))
* database init: If the database is already initialized, return 0 as the exit
code. This matches how the `database migrate` command works.
([PR](https://github.com/hashicorp/boundary/pull/1033))
### Bug Fixes
* server: Roles for auto generated scopes are now generated at database init.
([PR](https://github.com/hashicorp/boundary/pull/996))
* cli: Don't panic on certain commands when outputting in `json` format
([Issue](https://github.com/hashicorp/boundary/pull/992),
[PR](https://github.com/hashicorp/boundary/pull/1095))
## 0.1.8 (2021/03/10)
### Known Issues
These are specific known issues in the release that we feel are impactful enough
to call out in this changelog. The full set of open issues is on GitHub.
* cli: When authenticating, changing a password, or a couple of other specific
actions on the CLI, if the output format is specified as `json`, the command
will panic (after the API call executes). This is due to a preexisting bug
that was exposed by the JSON changes described in the changes section below.
Although most of our CLI-level tests operate on `json`-format output, because
our CLI-level tests use the token helper during execution, the authentication
test was using the normal table output since the output was ignored anyways.
As a result, our CLI tests did not catch this panic. Our apologies, and we
will fix this in the next release.
* Initially Created Scopes: Starting in 0.1.6, When initial scopes are created
when executing `boundary database init`, the associated admin roles aren't
created. The intended behavior is to have a role which granted the auto
created admin the grant `"id=*;type=*;actions=*"` for each auto generated
scope. To set your data to the intended state you can add a role for the
admin user in the generated scopes. An outline of the steps to do this can
be found in this
[gist](https://gist.github.com/talanknight/98492dc68d894f67742086eb41fdb506).
This will be fixed in the next release.
### Changes/Deprecations
* sdk (Go API library): A few functions have changed places. Notably, instead of
`ResponseMap()` and `ResponseBody()`, resources simply expose `Response()`.
This higher-level response object contains the map and body, and also exposes
`StatusCode()` in place of indivdidual resources.
([PR](https://github.com/hashicorp/boundary/pull/962))
* cli: In `json` output format, a resource item is now an object under the
top-level key `item`; a list of resource items is now an list of objects under
the top-level key `items`. This preserves the top level for putting in other
useful information later on (and the HTTP status code is included now).
([PR](https://github.com/hashicorp/boundary/pull/962))
* cli: In `json` output format, errors are now serialized as a JSON object with
an `error` key instead of outputting normal text
([PR](https://github.com/hashicorp/boundary/pull/962))
* cli: All errors, including API errors, are now written to `stderr`. Previously
in the default table format, API errors would be written to `stdout`.
([PR](https://github.com/hashicorp/boundary/pull/962))
* cli: Error return codes have been standardized across CLI commands. An error
code of `1` indicates an error generated from the actual controller API; an
error code of `2` is an error encountered due to the CLI command's logic; and
an error code of `3` indicates an error that was caused due to user input to
the command. (There is some nuance sometimes whether an error is really due to
user input or not, but we attempt to be consistent.)
([PR](https://github.com/hashicorp/boundary/pull/976))
### New and Improved
* list filtering: Listing now supports filtering results before being returned
to the user. The filtering takes place server side and uses boolean
expressions against the JSON representation of returned items. See [the
documentation](https://www.boundaryproject.io/docs/concepts/filtering/resource-listing)
for more details. ([PR 1](https://github.com/hashicorp/boundary/pull/952))
([PR 2](https://github.com/hashicorp/boundary/pull/957))
([PR 3](https://github.com/hashicorp/boundary/pull/967))
* server: Officially support reloading TLS parameters on `SIGHUP`. (This likely
worked before but wasn't fully tested.)
([PR](https://github.com/hashicorp/boundary/pull/959))
* server: On `SIGHUP`, [worker
tags](https://www.boundaryproject.io/docs/configuration/worker#tags) will be
re-parsed and new values used
([PR](https://github.com/hashicorp/boundary/pull/959))
* server: In addition to the existing `tls_min_version` listener configuration
value, `tls_max_version` is now supported. This should generally be left blank
but can be useful for situations where e.g. a load balancer has broken TLS 1.3
support, or does not support TLS 1.3 and flags it as a disallowed value.
## 0.1.7 (2021/02/16)
*Note:* This release fixes an upgrade issue affecting users on Postgres 11
upgrading to 0.1.5 or 0.1.6 and makes a modification to the `boundary dev`
environment. It is otherwise identical to 0.1.6; see the entry for that version
for more details.
### Changes/Deprecations
* `boundary dev` now uses Postgres 11 by default, rather than Postgres 12.
### Bug Fixes
* server: Fix an issue with migrations affecting Postgres 11
([PR](https://github.com/hashicorp/boundary/pull/940))
## 0.1.6 (2021/02/12)
### Changes/Deprecations
* authentication: The `auth-methods/<id>:authenticate` action is deprecated and
will be removed in a few releases. Instead, each auth method will define its
own action or actions that are valid. This is necessary to support multi-step
authentication schemes in upcoming releases. For the `password` auth method,
the new action is `auth-methods/<id>:authenticate:login`.
* permissions: Update some errors to make them more descriptive, and disallow
permissions in some forms where they will never take effect, preventing
possible confusion (existing grants already saved to the database will not be
affected as this is only filtered when grants are added/set on a role):
* `id=<some_id>;actions=<some_actions>` where one of the actions is `create`
or `list`. By definition this format operates only on individual resources
so `create` and `list` will never work
* `type=<some_type>;actions=<some_actions>` where one of the actions is _not_
`create` or `list`. This format operates only on collections so assigning
more actions this way will never work
* CORS: CORS is now turned on by default when running with `boundary server`
with a `cors_allowed_origins` value of `serve://boundary`. You can disable it
with `cors_enabled = false`, or if you want to change parameters, set
`cors_enabled = true` and the other related configuration values.
### New and Improved
* server: When running single-server mode and `controllers` is not specified in
the `worker` block, use `public_cluster_addr` if given
([PR](https://github.com/hashicorp/boundary/pull/904))
* server: `public_cluster_addr` in the `controller` block can now be specified
as a `file://` or `env://` URL to read the value from a file or env var
([PR](https://github.com/hashicorp/boundary/pull/907))
* server: Add `read` action to default scope grant
([PR](https://github.com/hashicorp/boundary/pull/913))
* server: `public_cluster_addr` in the `controller` block can now be specified
as a `file://` or `env://` URL to read the value from a file or env var
([PR](https://github.com/hashicorp/boundary/pull/907))
* sessions: Add `read:self` and `cancel:self` actions and enable them by default
(in new project scopes) for all sessions. This allows a user to read or cancel
any session that is associated with their user ID. `read` and `cancel` actions
are still available that allow performing these actions on sessions that are
associated with other users.
### Bug Fixes
* api: Fix nil pointer panic that could occur when using TLS
([Issue](https://github.com/hashicorp/boundary/pull/902),
[PR](https://github.com/hashicorp/boundary/pull/901))
* server: When shutting down a controller release the shared advisory lock with
a non-canceled context.
([Issue](https://github.com/hashicorp/boundary/pull/909),
[PR](https://github.com/hashicorp/boundary/pull/918))
* targets: If a worker filter references a key that doesn't exist, treat it as a
non-match rather than an error
([PR](https://github.com/hashicorp/boundary/pull/900))
## 0.1.5 (2021/01/29)
*NOTE*: This version requires a database migration via the new `boundary
database migrate` command.
### Security
* Boundary now uses Go's new execabs package for execution of binaries in
`boundary connect`. This is for defense-in-depth rather than a specific
issue. See the [Go blog post](https://blog.golang.org/path-security) for more
details. ([PR](https://github.com/hashicorp/boundary/pull/873))
### Changes/Deprecations
* controller/worker: Require names to be all lowercase. This removes ambiguity
or accidental mismatching when using upcoming filtering features.
* api/cli: Due to visibility changes on collection listing, a list will not
include any resources if the user only has `list` as an authorized action. As
a result `scope list`, which is used by the UI to populate the login scope
dropdown, will be empty if the role granting the `u_anon` user `list`
privileges is not updated to also contain a `read` action
### New and Improved
* targets: You can now specify a Boolean-expression filter against worker tags
to control which workers are allowed to handle any given target's sessions
([PR](https://github.com/hashicorp/boundary/pull/862))
* api/cli: On listing/reading, return a list of actions the user is authorized
to perform on the identified resources or their associated collections
([PR](https://github.com/hashicorp/boundary/pull/870))
* api/cli: Most resource types now support recursive listing, allowing listing
to occur down a scope tree
([PR](https://github.com/hashicorp/boundary/pull/885))
* cli: Add a `database migrate` command which updates a database's schema to the
version supported by the boundary binary
([PR](https://github.com/hashicorp/boundary/pull/872)).
### Bug Fixes
* controller/db: Correctly check if db init previously completed successfully
when starting a controller or when running `database init`
([Issue](https://github.com/hashicorp/boundary/issues/805))
([PR](https://github.com/hashicorp/boundary/pull/842))
* cli: When `output-curl-string` is used with `update` or `add-/remove-/set-`
commands and automatic versioning is being used (that is, no `-version` flag
is given), it will now display the final call instead of the `GET` that
fetches the current version
([Issue](https://github.com/hashicorp/boundary/issues/856))
([PR](https://github.com/hashicorp/boundary/pull/858))
* db: Fix panic in `database init` when controller config block is missing
([Issue](https://github.com/hashicorp/boundary/issues/819))
([PR](https://github.com/hashicorp/boundary/pull/851))
## 0.1.4 (2021/01/05)
### New and Improved
* controller: Improved error handling in iam repo
([PR](https://github.com/hashicorp/boundary/pull/841))
* controller: Improved error handling in db
([PR](https://github.com/hashicorp/boundary/pull/815))
### Bug Fixes
* servers: Fix erronious global unicast check that disallowed valid addresses
from being assigned ([PR](https://github.com/hashicorp/boundary/pull/845))
* cli: Fix (hopefully) panic some users experience depending on their Linux
setup when running the binary
([Issue](https://github.com/hashicorp/boundary/issues/830))
([PR](https://github.com/hashicorp/boundary/pull/846))
## 0.1.3 (2020/12/18)
### Changes/Deprecations
* controller: Switch the session connection limit for dev mode and the initial
target when doing database initialization to `-1`. This makes it easier for
people to start understanding Boundary while not hitting issues related to
some programs/protocols needing multiple connections as they may not be easy
for new users to understand.
([PR](https://github.com/hashicorp/boundary/pull/814))
### New and Improved
* controller, worker, cli: When the client quits before the session time is
over, but in a manner where the TOFU token will be locked, attempt canceling
the session rather than leaving it open to time out
([PR](https://github.com/hashicorp/boundary/pull/831))
* controller: Improved error handling in hosts, host catalog and host set
([PR](https://github.com/hashicorp/boundary/pull/786))
* controller: Relax account login name constraints to allow dash as valid
character ([Issue](https://github.com/hashicorp/boundary/issues/759))
([PR](https://github.com/hashicorp/boundary/pull/806))
* cli/connect/http: Pass endpoint address through to allow setting TLS server
name directly in most cases
([PR](https://github.com/hashicorp/boundary/pull/811))
* cli/connect/kube: New `kube` subcommand for `boundary connect` that makes it
easy to route `kubectl` commands through Boundary, including when using
`kubectl proxy` ([PR](https://github.com/hashicorp/boundary/pull/816))
* cli/server: Add some extra checks around valid/invalid combinations of
addresses to avoid hard-to-understand runtime issues
([PR](https://github.com/hashicorp/boundary/pull/838))
### Bug Fixes
* cli: Ensure errors print to stderr when token is not found
([Issue](https://github.com/hashicorp/boundary/issues/791))
([PR](https://github.com/hashicorp/boundary/pull/799))
* controller: Fix grant IDs being lowercased when being read back (and when
being used for permission evaluation)
([Issue](https://github.com/hashicorp/boundary/issues/794))
([PR](https://github.com/hashicorp/boundary/pull/839))
## 0.1.2 (2020/11/17)
### New and Improved
* docker: Official Docker image for `hashicorp/boundary`
([PR](https://github.com/hashicorp/boundary/pull/755))
* controller: Add ability to set public address for cluster purposes
([Issue](https://github.com/hashicorp/boundary/pull/758))
([PR](https://github.com/hashicorp/boundary/pull/761))
* ui: Improve scope awareness and navigation, including IAM for global scope
([PR](https://github.com/hashicorp/boundary-ui/pull/355))
* ui: Add dark mode toggle
([Issue](https://github.com/hashicorp/boundary/issues/719))
([PR](https://github.com/hashicorp/boundary-ui/pull/358))
* ui: Add scope grants to roles
([PR](https://github.com/hashicorp/boundary-ui/pull/357))
* ui: Add IAM resources to global scope
([PR](https://github.com/hashicorp/boundary-ui/pull/351))
### Bug Fixes
* controller, worker: Fix IPv4-only check so `0.0.0.0` specified without a port
only listens on IPv4
([PR](https://github.com/hashicorp/boundary/pull/752))
* ui: Fix grant string corruption on updates
([Issue](https://github.com/hashicorp/boundary/issues/757))
([PR](https://github.com/hashicorp/boundary-ui/pull/356))
* controller, cli: Fix mutual exclusivity bug with using -authz-token on `boundary connect`
([PR](https://github.com/hashicorp/boundary/pull/787))
## 0.1.1 (2020/10/22)
### Changes/Deprecations
Note: in addition to changes marked below in this section, be aware that
currently names of resources are case-sensitive, but in a future update they
will become case-preserving but case-insensitive for comparisons (e.g. if using
them to access targets).
* cli: There are two changes to token storage handling:
* Specifying `none` for the `-token-name` parameter has been deprecated in
favor of specifying `none` for the new `-keyring-type` parameter.
* [`pass`](https://www.passwordstore.org/) is now the default keyring type on
non-Windows/non-macOS platforms. See the [CLI docs
page](https://www.boundaryproject.io/docs/api-clients/cli) for more
information.
### New and Improved
* cli: New `-keyring-type` option and `pass` keyring type for token storage
([Issue](https://github.com/hashicorp/boundary/issues/697))
([PR](https://github.com/hashicorp/boundary/issues/731))
* connect: Allow using `-target-name` in conjunction with either
`-target-scope-id` or `-target-scope-name` to connect to targets, rather than
the target's ID
([PR](https://github.com/hashicorp/boundary/pull/737))
* controller: Allow API/Cluster listeners to be Unix domain sockets
([Issue](https://github.com/hashicorp/boundary/pull/699))
([PR](https://github.com/hashicorp/boundary/pull/705))
* ui: Allow creating and assigning a host to a host set directly from the host
set view
([Issue](https://github.com/hashicorp/boundary/issues/710))
([PR](https://github.com/hashicorp/boundary-ui/pull/350))
### Bug Fixes
* cli: Fix database init when locale isn't English
([Issue](https://github.com/hashicorp/boundary/issues/729))
([PR](https://github.com/hashicorp/boundary/pull/736))
* cli: Fix hyphenation in help output for resources with compound names
([Issue](https://github.com/hashicorp/boundary/issues/686))
([PR](https://github.com/hashicorp/boundary/pull/689))
* controller: Allow connecting to Postgres when using remote Docker in dev mode
([Issue](https://github.com/hashicorp/boundary/issues/720)
([PR](https://github.com/hashicorp/boundary/pull/732))
* controller, worker: Fix listening on IPv6 addresses
([Issue](https://github.com/hashicorp/boundary/issues/701))
([PR](https://github.com/hashicorp/boundary/pull/703))
* worker: Fix setting controller address for worker in dev mode
([Issue](https://github.com/hashicorp/boundary/issues/727))
([PR](https://github.com/hashicorp/boundary/pull/705))
## 0.1.0 (2020/10/14)
v0.1.0 is the first release of Boundary. As a result there are no changes,
improvements, or bugfixes from past versions.
Reference in new issue View Git Blame Copy Permalink