Merge pull request 'docs(whp): rework DNS page for new Domains & DNS UI' (#1) from docs/dns-page-rework into main

Reviewed-on: #1

src/content/docs/whp/how-to/add-a-domain.mdx

@@ -27,24 +27,25 @@ import Support from '~/content/partials/support-link.mdx';
 
 <Steps>
 
-1. In the sidebar, click **Domains**.
+1. In the sidebar, click **Domains & DNS**. You'll see a searchable list of the domains on your account.
-   ![WHP Domains page](~/assets/screenshots/whp/whp-domains.png)
+   ![WHP Domains & DNS page](~/assets/screenshots/whp/whp-domains.png)
 
-2. Under **Add New Domain** on the left, type your domain (for example, `example.com`). Don't include `http://` or `www.` — just the bare domain.
+2. Click **Add Domain** in the top right. In the dialog, type your domain (for example, `example.com`) — just the bare domain, with no `http://` or `www.`
+   ![Add Domain dialog](~/assets/screenshots/whp/whp-dns-add-domain.png)
 
-3. Click **Add Domain**.
+3. Click **Add Domain** to confirm. The domain appears in the list with a green **Active** status.
 
 </Steps>
 
-WHP creates the standard set of DNS records automatically for the new domain:
+WHP creates a DNS zone with the standard set of records automatically for the new domain:
 
 - **A record** for the apex domain → your server's IP
 - **CNAME** for `www` → the apex
 - **NS records** for the nameservers
 - **MX record** → the mail server
-- **TXT record** for SPF
+- **TXT records** for SPF and DKIM
 
-You can review and tweak any of these from the **DNS Management** panel on the right side of the Domains page (select the domain from the dropdown).
+You can review and tweak any of these — click **Manage DNS** next to the domain to open the records editor. See [Manage DNS records](/whp/how-to/manage-dns-records/) for the full walkthrough.
 
 ## Point your DNS at us
 
@@ -54,7 +55,7 @@ There are two paths depending on where the domain is registered:
 
 **Registered elsewhere.** At your registrar, do one of the following:
 
-- Set the **nameservers** to the values shown on the Domains page (recommended — gives us full DNS control, easier to support), **or**
+- Set the **nameservers** to the values shown in **Manage DNS** (the **NS** records) — recommended, as it gives us full DNS control and is easier to support — **or**
 - Keep your existing nameservers and add an **A record** pointing the domain to the IP shown on the **Dashboard** page under Server Information.
 
 ## Verify it worked
@@ -76,6 +77,7 @@ Once DNS resolves, visiting your domain in a browser will reach WHP — though y
 
 ## Related
 
+- [Manage DNS records](/whp/how-to/manage-dns-records/)
 - [Create a site](/whp/how-to/create-a-site/)
 
 ## Still stuck?

src/content/docs/whp/how-to/backups.mdx

@@ -2,7 +2,7 @@
 title: Backups
 description: Run on-demand and scheduled backups of your sites and databases, and confirm they're succeeding.
 sidebar:
-  order: 4
+  order: 5
 ---
 
 import { Steps, Aside } from '@astrojs/starlight/components';

src/content/docs/whp/how-to/create-a-site.mdx

@@ -2,7 +2,7 @@
 title: Create a site
 description: Spin up a containerized site on a domain you've added to WHP.
 sidebar:
-  order: 2
+  order: 3
 ---
 
 import { Steps, Aside } from '@astrojs/starlight/components';

src/content/docs/whp/how-to/create-an-email-account.mdx

@@ -2,7 +2,7 @@
 title: Create an email account
 description: Add a mailbox on one of your domains and connect your email client.
 sidebar:
-  order: 3
+  order: 4
 ---
 
 import { Steps, Aside } from '@astrojs/starlight/components';

src/content/docs/whp/how-to/manage-dns-records.mdx

@@ -0,0 +1,113 @@
+---
+title: Manage DNS records
+description: View, add, edit, and delete DNS records for your domains using the Domains & DNS records editor in WHP.
+sidebar:
+  order: 2
+---
+
+import { Steps, Aside } from '@astrojs/starlight/components';
+import SignIn from '~/content/partials/signing-in.mdx';
+import Support from '~/content/partials/support-link.mdx';
+
+When we host your DNS, WHP gives you a full records editor — add, edit, or remove **A**, **CNAME**, **MX**, **TXT**, and other records yourself, no support ticket needed.
+
+## Before you start
+
+- A domain already added to your account. If you haven't done that yet, [add a domain](/whp/how-to/add-a-domain/) first.
+- We must be running DNS for the domain (its nameservers point at us). If your DNS lives at another provider, make these changes there instead.
+- A couple of minutes. Record changes apply quickly on our side, but can take up to 24 hours to propagate worldwide.
+
+## Sign in to WHP
+
+<SignIn />
+
+## Open the records editor
+
+<Steps>
+
+1. In the sidebar, click **Domains & DNS**.
+   ![WHP Domains & DNS page](~/assets/screenshots/whp/whp-domains.png)
+
+2. Find your domain in the list and click **Manage DNS**.
+   ![DNS records editor for a domain](~/assets/screenshots/whp/whp-dns-records.png)
+
+</Steps>
+
+Each domain starts with a standard zone created automatically when the domain was added:
+
+| Type | What it's for |
+| --- | --- |
+| **A** | Points the apex domain at your server's IP. |
+| **CNAME** | Aliases like `www` and `autoconfig` to the right host. |
+| **MX** | Routes mail for the domain to our mail server. |
+| **TXT** | SPF and DKIM records that help your mail pass authentication. |
+| **NS** | The nameservers that are authoritative for the domain. |
+| **SRV** | Service records such as mail autodiscovery. |
+
+<Aside type="caution">
+  Editing **MX**, **NS**, or the SPF/DKIM **TXT** records can break email delivery or hand DNS control away from us. Only change these if you know exactly what you're doing.
+</Aside>
+
+## Add a record
+
+<Steps>
+
+1. Click **Add Record**. A new, editable row appears at the top of the table.
+   ![Inline Add Record row](~/assets/screenshots/whp/whp-dns-add-record.png)
+
+2. Fill in the row:
+   - **Type** — choose the record type (A, AAAA, CNAME, MX, TXT, NS, PTR, SRV, CAA, SSHFP, or TLSA).
+   - **Name** — the host the record applies to. Use `@` for the domain itself, or a subdomain like `blog` for `blog.example.com`.
+   - **Content** — the value: an IP for an A record, a hostname for a CNAME, and so on.
+   - **Prio** — only used by record types that need a priority (like MX). Leave it blank otherwise.
+   - **TTL** — how long resolvers may cache the record, in seconds. The default of `300` (5 minutes) is fine for most records.
+
+3. Click **Save**. The record joins the list immediately. (Click **Cancel** to discard the row without saving.)
+
+</Steps>
+
+## Edit or delete a record
+
+In the **Actions** column on the right of each row:
+
+- The **pencil** icon opens the record for editing in place. Change any field, then save.
+- The **trash** icon deletes the record. Deletions take effect right away, so double-check before you remove anything.
+
+## Find a record quickly
+
+If a domain has a lot of records, use the **All types** dropdown above the table to filter by a single record type — for example, show only **MX** records while you sort out mail.
+
+## Work with several records at once
+
+Tick the checkboxes on the left of one or more rows to reveal the bulk-action bar:
+
+![Bulk actions on selected DNS records](~/assets/screenshots/whp/whp-dns-bulk-actions.png)
+
+- **Change TTL** — set the same TTL on every selected record.
+- **Enable/Disable** — toggle records on or off without deleting them (handy for temporarily parking a record).
+- **Delete** — remove all selected records at once.
+- **Clear** — clear your selection (this does *not* delete anything).
+
+## Verify it worked
+
+DNS changes apply on our side within moments, but resolvers elsewhere may keep serving the old answer until the record's TTL expires (up to 24 hours for unfamiliar records).
+
+- Run `dig example.com +short` (or `dig blog.example.com A +short`) from a terminal and confirm you see the value you just set.
+- Or use a web tool like [whatsmydns.net](https://www.whatsmydns.net/) to watch propagation across regions.
+
+## Troubleshooting
+
+**My change isn't showing up yet.** Resolvers cache records for the length of their TTL. Wait for the TTL to pass, then clear your local DNS cache and check again with `dig`.
+
+**There's no Manage DNS button for my domain.** We're not running DNS for it — its nameservers point somewhere else. Make the change at your current DNS provider, or [point the domain's nameservers at us](/whp/how-to/add-a-domain/#point-your-dns-at-us) first.
+
+**Email stopped working after I edited records.** Restore the original **MX** and SPF/DKIM **TXT** records. If you're not sure what they should be, open a support ticket (see below) and we'll put them back.
+
+## Related
+
+- [Add a domain](/whp/how-to/add-a-domain/)
+- [Create an email account](/whp/how-to/create-an-email-account/)
+
+## Still stuck?
+
+<Support />

src/content/docs/whp/how-to/switching-site-backend.mdx

@@ -2,7 +2,7 @@
 title: Switching your site's backend
 description: Change the web engine (container type) running a site — standard PHP/FPM or the premium LiteSpeed/OpenLiteSpeed tier.
 sidebar:
-  order: 5
+  order: 6
 ---
 
 import { Steps, Aside } from '@astrojs/starlight/components';

tools/screenshots/capture-dns.ts

@@ -0,0 +1,140 @@
+/**
+ * DNS capture — the reworked "Domains & DNS" area.
+ *
+ * Captures, as the demo customer (so the demo domain's real zone shows):
+ *   - whp-domains.png          the Domains & DNS list (searchable table)
+ *   - whp-dns-add-domain.png   the Add Domain modal
+ *   - whp-dns-records.png      the per-domain DNS Records editor
+ *   - whp-dns-add-record.png   the inline "Add Record" editor row
+ *   - whp-dns-bulk-actions.png the bulk-select toolbar
+ *
+ * Viewport-only (1440x900), redacted for our multi-server fleet: server /
+ * mail / nameserver hostnames and IPs become neutral placeholders, while the
+ * brand demo domain (whp-demo.anhh.co) is kept visible on purpose.
+ *
+ * Read-only: opens modals and ticks checkboxes for the screenshot, never
+ * saves, deletes, or submits anything.
+ */
+import { chromium, type Page } from 'playwright';
+import { mkdir } from 'node:fs/promises';
+import { resolve, dirname } from 'node:path';
+import { fileURLToPath } from 'node:url';
+
+const __dirname = dirname(fileURLToPath(import.meta.url));
+const OUT_DIR = resolve(__dirname, '../../src/assets/screenshots/whp');
+
+function need(name: string): string {
+  const v = process.env[name];
+  if (!v) throw new Error(`missing env: ${name}`);
+  return v;
+}
+
+const BASE = need('WHP_BASE');
+const USER = need('WHP_USER');
+const PASS = need('WHP_PASS');
+const DOMAIN = process.env.WHP_DEMO_DOMAIN ?? 'whp-demo.anhh.co';
+
+const HIDE_CSS = `.navbar-text, .brand-full { visibility: hidden !important; }`;
+
+async function login(page: Page) {
+  await page.goto(`${BASE}/login.php`, { waitUntil: 'domcontentloaded' });
+  await page.fill('input[name="user"]', USER);
+  await page.fill('input[name="password"]', PASS);
+  await page.click('button[type="submit"]');
+  await page.waitForLoadState('networkidle');
+}
+
+/**
+ * Neutralise fleet-identifying text before the screenshot. The brand demo
+ * domain (anhh.co) is intentionally preserved; everything that names a
+ * specific server, mail host, nameserver, or IP is swapped for a placeholder.
+ */
+async function redact(page: Page) {
+  await page.addStyleTag({ content: HIDE_CSS });
+  await page.evaluate(() => {
+    const swaps: [RegExp, string][] = [
+      [/ns[12]\.whp\d+(-[a-z0-9]+)?\.cloud-hosting\.io/gi, 'ns<n>.<your-server>.cloud-hosting.io'],
+      [/whp\d+(-[a-z0-9]+)?\.cloud-hosting\.io/gi, '<your-server>.cloud-hosting.io'],
+      [/mail\d+\.cloud-hosting\.io/gi, '<mail-server>.cloud-hosting.io'],
+      [/WHP\d+(-[A-Z0-9]+)?\b/g, '<YOUR-SERVER>'],
+      [/whp\d+(-[a-z0-9]+)?\b/gi, '<your-server>'],
+      // Public IPv4 (skip RFC1918 — those read fine as generic examples)
+      [/\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b/g, '<server-IP>'],
+      [/demo-user/g, 'your-username'],
+    ];
+    // Text nodes
+    const walker = document.createTreeWalker(document.body, NodeFilter.SHOW_TEXT);
+    const nodes: Text[] = [];
+    let n: Node | null = walker.nextNode();
+    while (n) { nodes.push(n as Text); n = walker.nextNode(); }
+    for (const node of nodes) {
+      let v = node.nodeValue ?? '';
+      for (const [re, rep] of swaps) v = v.replace(re, rep);
+      if (v !== node.nodeValue) node.nodeValue = v;
+    }
+    // Input values (the inline Add Record / TTL fields)
+    document.querySelectorAll<HTMLInputElement>('input').forEach((el) => {
+      if (el.type === 'password' || !el.value) return;
+      let v = el.value;
+      for (const [re, rep] of swaps) v = v.replace(re, rep);
+      if (v !== el.value) el.value = v;
+    });
+  });
+}
+
+async function shot(page: Page, id: string) {
+  await page.waitForTimeout(400);
+  await redact(page);
+  const path = resolve(OUT_DIR, `${id}.png`);
+  await page.screenshot({ path, fullPage: false });
+  console.log(`captured ${id} -> ${path}`);
+}
+
+async function main() {
+  await mkdir(OUT_DIR, { recursive: true });
+  const browser = await chromium.launch({ headless: true });
+  const ctx = await browser.newContext({
+    ignoreHTTPSErrors: true,
+    viewport: { width: 1440, height: 900 },
+    deviceScaleFactor: 2,
+  });
+  const page = await ctx.newPage();
+  try {
+    await login(page);
+
+    // 1. Domains & DNS list
+    await page.goto(`${BASE}/index.php?page=domains`, { waitUntil: 'networkidle' });
+    await shot(page, 'whp-domains');
+
+    // 2. Add Domain modal
+    await page.locator('button:has-text("Add Domain"), a:has-text("Add Domain")').first().click();
+    await page.waitForTimeout(600);
+    await shot(page, 'whp-dns-add-domain');
+    await page.keyboard.press('Escape').catch(() => {});
+    await page.waitForTimeout(300);
+
+    // 3. DNS Records editor for the demo domain
+    await page.goto(`${BASE}/index.php?page=domains&domain=${DOMAIN}`, { waitUntil: 'networkidle' });
+    await shot(page, 'whp-dns-records');
+
+    // 4. Inline Add Record row
+    await page.locator('button:has-text("Add Record"), a:has-text("Add Record")').first().click();
+    await page.waitForTimeout(500);
+    await shot(page, 'whp-dns-add-record');
+    // Cancel the inline add row so the next shot is clean
+    await page.locator('button:has-text("Cancel")').first().click().catch(() => {});
+    await page.waitForTimeout(400);
+
+    // 5. Bulk-select toolbar (tick two record rows)
+    const rowChecks = page.locator('table tbody input[type=checkbox]');
+    const n = await rowChecks.count();
+    if (n >= 2) { await rowChecks.nth(0).check(); await rowChecks.nth(1).check(); }
+    else if (n === 1) { await rowChecks.nth(0).check(); }
+    await page.waitForTimeout(500);
+    await shot(page, 'whp-dns-bulk-actions');
+  } finally {
+    await browser.close();
+  }
+}
+
+main().catch((err) => { console.error(err); process.exit(1); });