hpr-knowledge-base/hpr_transcripts/hpr1062.txt

Episode: 1062
Title: HPR1062: LiTS 014: The Bottom of Top, top pt 2
Source: https://hub.hackerpublicradio.org/ccdn.php?filename=/eps/hpr1062/hpr1062.mp3
Transcribed: 2025-10-17 18:11:58

---

Welcome to Linux in the Shell episode 14, the bottom of top.
My name is Dan Washco, I'll be your host today and I would like to thank HackRepublic Radio
for hosting this program. So if you want to contribute, check out HackRepublic Radio and do a
Shell. They're always welcoming ideas and new hosts, so do please contribute. Now before I get
going with the bottom of top, I just want to say two things. One, this is going to be a very
heavy episode. There's a lot of information here to cover, so you're going to want to supplement
with a visit to the website, Linux in the Shell.org. I'm looking up episode 14 because we're going
to be covering a lot, a lot of content because the bottom of top is very configurable and there's a lot
of stuff. So without further ado, let's go ahead and get rolling. Now last week, we're last episode
I should say. We talked about the top of top. Top is broken up into two different sections. The top
five lines are so, by default, it was a summary area and that shows you your CPU and memory
information and general information. So check out the episode 13 for the full skinny on that.
We're going to be talking about the rest of the top interface and that's the bulk of it
and that's everything underneath that by default gray bar with items in it and that's called
the task area. That is essentially a list of all the processes running on your system and it's
going to be ordered in any manner that you choose. By default, it is ordered by CPU utilization
and we'll get to that or CPU percentage and we'll get to that in a minute. What I'm going to do
is I'm going to go through the columns, default columns at the top that you'll see,
the little explanation of those and then I'll talk about the other columns that you can add with
some explanations and then how you can configure that. So let's jump right in. When you start off
top, default window is going to show a column in a gray bar and that's going to have the field
names and then each process underneath that is a row with the information filled in accordingly
to each field name. The first column is going to be called PID. PID is the process ID. It's the
unique ID associated with the process information that's detailed on that row. So that's going to be
your PID right there and then next to that is going to be user and that's the user account the
process is running under. It's the owner of the process. That's followed by PR and that stands for
priority. Now this gets a little complicated because what's being reported here is the scheduled
priority of the task running and that value is dynamically generated by the kernel using the
nice value and the range is pretty dynamic but there is a calculation and what I found the calculation
is NI which is nice plus 20 minus X to NI plus 20 plus X. So the value is a range
that an X in this is a bonus or a quote discount point. So the range is dynamic and it can be a
negative number or a positive number and these values are adjusted over time and it's dependent
on how the process utilizes CPU time. Now for process is sleeping a lot. It'll adjust
the X value of that process so it decrements. Now for process uses a lot of CPU time it has
their points adjusted or that X value so the value increments. So when the scheduler checks to see
what the process to run the process with the lowest priority or the lowest number will run first when
the scheduler looks through it all the processes. Now you probably see many of these processes running
have the same PR value if you're looking at top and that's that's kind of to be expected. Most of
those you will see with the same PR level between 20 and 19 and 20 or whatever are probably sleeping.
Now there's another value in there. It's RT and that stands for real time. So be aware of that.
It's a value that's determined by the dynamically by the kernel. So that if a process is sleeping
it's probably waiting for some IO possibly or whatever that it's possible that the kernel will start
adjusting the value so the PR value lowers and gets negative. So when the scheduler comes through
and checks to see what process it needs to run when it's free it'll choose one with a lower value
that's ready to be run. So that's a way for the kernel to say hey this needs to get taken care
of when it's ready right away or this isn't necessarily a high priority when the scheduler is free.
So that's what PR stands for scheduling priority. Next to that is the nice value of the task.
The nice value is a number from negative 20 to 19 where the lower value has the highest priority.
So something that has a negative 5 has a higher priority than something that has a value of 10.
Now most processes start off with the value of 0 so it's right in the middle
and that's what you'll see a lot of these processes running under unless the nice value has been
changed but otherwise you can see on there what the nice value of the process is running as.
The next column is vert virtual memory size. Now this is the total amount of virtual memory used
by the process and it's not necessarily real memory used in a physical memory but it includes
data swapped out to disk or cache share libraries etc so don't confuse this value with the physical
RAM value and that is the next column which is resident memory size. Resident memory size is how
much physical non-swappable memory the process is used. So that's a more accurate representation of
how much physical RAM that process is taking up and you'll see after these values more than
likely an M if it's megabytes or a G if it's gigabytes or if it's just I believe K if it's
kilobytes and if it's just bytes you'll see nothing listed there but that'll give you an idea of
with how much memory that process is running utilizing. So virtual memory size is the amount of
virtual memory used by the process whereas RES resident memory size is how much physical
memory is being utilized non-swappable memory. Then there's SHR which is shared memory size.
Now that's the amount of memory available to a task that is shared with other processes.
Now for instance if you had multiple instances of an application like a bash shell running
instead of each one firing up and using you know the same resources in memory over and over
duplicating those resources the operating system will allow for those same libraries
to be shared. So where it can be shared it will share those values instead of each individual
resource taking up its own a bit of memory it can share that memory between them and this will show you
how much memory of that how much of that memory is being used by that application it's the library
said it's using the shared libraries an overall load on the system. So that number might be
a value between what you're seeing in virtual or shared or it might be you know significantly
lower. So shared memory is how much of the resources is taking that are being shared between other
applications. S column stands for the status and it is of one of five values you're going to see a D
which is uninterruptable sleep and S for sleeping. Now what's the difference between uninterruptable
sleep and sleeping? Well a process that is running as sleeping can be interrupted by a signal
but a process that is uninterrupted sleep cannot be interrupted. Now what that usually means is
process as a status of D or uninterruptable sleep is waiting for a resource to become available like a
disk. So any signal sent to a process in the uninterruptable sleep state will accumulate
until that and be handled when the process returns from the sleeping state. So it'll queue up those
signals that might get sent to it if that's the case and instead of interrupting the sleeping
process to process those signals it'll wait till whatever that process is waiting for completes
it runs and then it'll process those those signals that were sent to it. So that's the difference
between uninterruptable sleep and interruptable sleep or sleeping in general. Then there's running.
Running is means the process is probably running or it's ready to run so that is good to go.
Then there's T and T stands for traced or a stopped process. A process that might have been stopped
by hitting control Z and then finally there's Z for zombie which means the process is has
issued a that is finished but it's waiting for the signal from its parent to catch up and clean
up after it. Last week or last episode towards the end of the episode I had noticed that there was
a zombie process running and I had said I wonder what that zombie process is and I couldn't
figure it out at the time but I then figured out what it was during the screen capture session
that I was running for the video and that was the GTK record my desktop has spun off a process
that was a zombie process and that cleaned itself up when I was done with the screen catchers.
So zombie processes are not necessarily bad so to say or a cause of a problem it could be
the way the program is written it's just waiting for something to complete to get back to it but
if you see zombie processes sticking around stacking up that could be an indication of the problem.
We talked about that last last episode. Then there's percent CPU and that's the tasks
share of the CPU time utilized since the last refresh. So if you're running in a multi-processor
environment remember that the default iris mode is on and the value percentage is a percentage
of the combined CPUs. So in a sense if you have two CPUs and you see a percentage of the CPU
utilized since the last refresh is 10 percent that's 10 percent of two CPUs
like 10 percent of 200 percent so be aware of that whereas if you turn off iris mode which I
explained last episode you end up with a laris mode and the values the percentage divided
among the total number of CPUs. So in that case the 20 percent would be 100 percent of both CPUs.
If you switch between the modes you're not going to suddenly see 20 percent
in iris mode drop down to 10 percent in salaris mode. It does not that clean cut but essentially
that's the way those two modes operate and for more information consult the last episode
in the notes therein and refresh rate remember by default is three seconds but you can adjust that
if you want to. Now percent mem is the amount of physical system memory used by the process displayed
as a percentage and that's going to show you the percentage of physical RAM used by the process.
Then you'll see time plus. Time plus displays a total CPU time the task is utilized since it started
in hundreds of a second. Now what this means is if you look at it I mean since this process started
if you're looking at it it has consumed this amount of the CPU this amount of CPU time. So you
might look at a process that you've had up and running for a bit like right now I'm recording
this in audacity and it's pretty CPU intensive. Well not very CPU intensive but it uses a lot of
the CPU. It's going at 11 percent CPU utilization since the last refraction it fluctuates between
those and remember I'm on iris mode by default. So this is a dual core system so that's between 11
and 13 or 14 percent of 200 percent that's being used. Now if I switch it between iris mode
turning off iris mode and turning it on it changes those values but they don't
they don't differ that drastically so just just be aware of that. Anyway back to what I was saying
now the total CPU time since I started this application is being used is now about two minutes
of CPU time that's been utilized. It shows one minute 55 seconds in like 0.5
hundreds of a second. So it puts it down there and shows you how much CPU time that that resource
has consumed. The plus means it's allowing hundreds of a second. Now there are some there's two
options that you can have going on here. The default cumulative option which the value is off
it does not include any of the processes dead children. So if a process spun off a child process
and then the child process of course finished that's considered a dead child very morbid of course.
cumulative value is off so it doesn't show those values in there but if you turn cumulative mode on
by pressing capital S it'll show you the value of any dead children that were spun off by that
process and included into the time of the CPU was being utilized. Finally we have the last line
by default is the command and that's pretty simple. The command that is the process is running under
the name of the command. You can toggle this to the command line by pressing the lower case C
and that'll show you the command that was executed on the command line to generate that process.
If you see a process that wasn't you know in that case is in brackets that means that the process
wasn't started from the command line like a kernel thread and so that that value is going to
be contained in brackets. Now you might say why didn't start the process from a command line. I
started it from like a run line in a window manager or a desktop environment to click on an icon.
Well essentially it's the same as starting it from the command line in many regards because if you
pull that up you will see. Okay so that covers the default columns that you can have in the top
window. The next list that I'm going to talk about or the optional value says you can easily toggle
on and off and I'll tell you how to do that when I finish covering it so I want you to remember
that most importantly. Okay now this is a fairly long list so strap yourselves in because here we
go we're already at a good 17 minutes and this is the lion's share of the show C group. Okay this
column option lists the control groups that the process belongs to. Now if a process doesn't
belong to a control group a dash will be displayed. Now what a control group is is a feature of
the Linux kernel to limit account and isolate resource usage of process groups. So control group
is a collection of processes that are bound by the same criteria that's kind of what the definition
is. There are tools to create control groups like CG creates, CG execute or CG classify and they
are especially useful in virtualized environments to help ensure that one group or program does not
exceed the resources allocated and a pair system functionality for other users or processes.
It allows you control groups to allow you to define resources a specific group can use and even
limit access to a specific resource if need be. Control groups are organized hierarchically where
children control groups inherit attributes from the parent. That's in a nutshell what a C group does.
It's a little beyond the scope of the intent of this show right now to go in the further detail
about C groups but if you really want to know more head on over to the website I have links
and show notes to give you more information about those. Code is an option and that displays the
code size of the amount of physical memory devoted to the executable code in kilobytes.
This is also known as the text resident set by some other applications like PS.
Now this value shows how much physical memory is actually being used and it excludes what swamped
out. So that's code. Then we have data. The data entry details the amount of physical memory used
by the process that is devoted to everything but the code. So that would be like you know in a
VI if you're running a VIM session the code that VI runs under would not be including this section
it would actually be what the text is or swapped out to like the drive or that's in resident memory
how much of data is being utilized that's not code. And we have flags. Flags is a hexadex
hexadecimal representation of the tasks are in schedule flags and zeros are suppressed.
That one is a difficult one to define. I'm not going to try and cover that right now because I
spent a lot of time digging through different things. There's going to be a list of hexadecimal values
for all the flags that are appropriate to what the task is running under by the kernel and
if you if you go in there they say it's covered under the how do I say it's covered under
the includes file if you start reading the includes file that's uh trying to remember what the
name of the include file is I tried digging through this one this one was tough this one was
really tough to go it's possibly in the like user include linux-schedule.h and they say look
in there the flags are officially documented in there I did not see all the flags in there and
uh I looked all over the web and stuff so I have some resources that made that talk about that
it's a fairly complex topic go to the notes if you want more information but that'll show you the
hexadecimal representations of the scheduling flags for that task then there's gid which is the
group id the process is running under or you can choose group which is the name of the group
that the process is running under instead of just showing you the gid and we have something called
ndrt and this is the the count of dirty pages and those are pages that have been written to
auxiliary storage so when operating system needs to bring a page into memory and if
there's no physical page free what the OS will do is attempt to discard pages that are not in use
in the physical memory now a dirty page in this case is data that's in memory that has been altered
but not saved to disk so the page really can't be deleted and as it maybe need to be called
again so it must be saved out to like a swap file so if if you're like working on a on a
process so if you're working on like a text editor for this is a kind of high level looking at it
and and you're editing something and the page is resident in memory the values are in memory but
you start going on doing other processes need to be and that starts to sit idle there's a chance
that if the system needs to swap out to free up some pages it might look at that and say well
here's information a page that has been altered it's not the same that's on disk but I can't dump
it out of memory because it hasn't been saved I need to move it over here to swap area until to
handle this new bit of information that needs to go into a page and if it gets called again
I could pull it out of the swap but it hasn't actually been committed to any auxiliary storage
then we have n ma g and that's the number of major page phones that have occurred for a task
now when a process attempts to read or write to a virtual page that is not in its address space
that's a page phone okay what makes it a major page fault is when auxiliary storage accesses
involved in making that page available it is flagged as a major fault so if it's trying to access
a memory space that's on auxiliary storage not in main memory and it's not in its address space
that's a major page phone whereas then there's n min which is minor page phone is the same thing
is trying to access address space that's not in this current address space but it's not stored on
auxiliary storage it's resident memory we have n th now this column shows the number of threads
associated with the process so how many threads a process may have spawned or that are associated
with that process p stands for the last used processor in a multi processor system if you're
only running one processor it's probably just going to show you one but what it'll do is it'll
show you what was the processor that the task was running on at that time of the last refresh
then we have p g r p the process grouped by d processes are grouped in unique groups
for the distribution of signals and terminals and by terminals to arbitrary requests for their input
and output it's taken from the Wikipedia page I believe a child process are members of their
parent groups so when a new process is started the process group idea is usually set to the process
ID and becomes group leader if it's a new process but children usually inherit the process group
ID of the parent so a lot of times you'll see PRG PID set to zero which is the init process group
ID which is the process ID of the init application when it runs so in it's running under a PR
PGRP of zero so a lot of processes you might see in top of running with a process group ID
of zero and that's because they've been spawned from from init whereas if you're running a new
app and I can pull up a terminal and you fire off an application it might generate its own process
group ID depending on the application or might inherit it from the terminal PPID this column
represents the parent process idea of the process more often than not you'll see a lot of processes
having init parent process ID so this this will just show you a process spawned from a parent
or what the parent ID might be it'll show you that process ID our UID stands for real user ID
that's the real user ID the process is running under generally the user who started the process
now this is different than the effective user ID and that the effective user ID can be different
from the real user ID if the process is running under with the process that it's running under
has been altered using a command like SUID to run that process so it if you were to run a process
using the SUID command the effective user ID may be root or somebody else but the process
real user ID is going to show up as you because you were the one who started it
similar to that is the R user which is the real user ID I mean real user name sorry
instead of showing you the ID that will show you the real user name the process will start it
we have sit sit is similar to process group ID but it's the session ID
that the process is a member of the session ID is a collection of process groups that is usually
started by the login shell so that will show you the session ID then we have SUID which I had
mentioned before now SUID stands for saved user ID so when a program is running as a privileged
user and it needs to execute commands as an unprivileged user what it does is a copies of
privilege user ID to SUID value so and this is what's reported by top so it knows when it needs
a return to the elevated privilege user that's the SUID or the elevated privilege user ID that it
needs to run under now like our user or our our UID and our user SUID has an SUID and that just
displays the name instead of the ID oh I forgot one I forgot a couple I missed a list here SUP
GIDs this is a column contains the IDs of any supplementary groups the process is running under
and of course there's SUP GRPS and instead of showing you the IDs it'll show you the group name
separated by column commas we have SWAP and this is defined as the non-resident portion of a
task address space so it's the amount of address space the task is using that is not resident memory
so stuff that might be swapped out to a swap file or cashed cash file or whatever
we have TGID that's a thread group ID it's more useful with a multi-threaded process
because a single threaded process will only report the process ID so if it's a multi-threaded
process it'll show you the group ID thread group ID that process is currently a part of
we have time which is a little different than time plus I mean this is the same thing it's a
total CPU time the process is used since it started but the values in seconds here are not
hundreds of a second and of course you can toggle on an off cumulative mode with the
S lowercase S TPGID TPGID is the process group ID of the foreground process
for any connected terminal that started the process if the process is not connected to a terminal
the value the negative one is given so it shows you what the process ID of the terminal that it was
pretty much what it was the process ID of the terminal that it's connected to TTY is the name
of the terminal controlling the process generally this is going to be a device name UID the effective
user ID of the process or you can have user which is the effective user name the process is running
under we have we have wchan right now what wchan is is this column shows a name
or address of the kernel function in which a task is currently sleeping that the process is not
sleeping then it will display a dash instead of a ID or address space right there or name so
that some of that stuff is probably really only helpful to programmers for debugging issues on
their application but if you want more information on a lot of that head on over to the website
and look at the notes there's a lot of stuff to cover there give you a lot of information so
in a nutshell I've given you the default values and the values that you can toggle on and off
in the display of top now you might be asking yourself Dan how do I do that well it's very very simple
you press the lowercase f key you just press the f keys lowercase and that will switch the top
window that you're looking at to a a new window called the fields management window and right
at the top of the fields management window is an exclamation of how to navigate this window so what
you're going to get is directions at the top then you're going to get a list of all the columns
that you can toggle on and off with more than likely if you not change anything the defaults first
and then the rest of them now what you'll see or right off the bat you will see
ones that are bold that are highlighted in a default window they'll be just like bolded white
and then you'll see just normal colored text on these values so what you can do to navigate this
what the bolder means is that those are the values that are currently displaying in the fields those
are the fields that are currently displaying and you can they'll have an asterisk next to them too
and you can navigate this list by pressing the up and down arrow keys and you can move up and down
and if you want to toggle a field on or off all you have to do is hit the space key or the D key for
display and if it's if it's bolded and displaying it will it will turn that field off if it's not bolded
it will turn that field on and you will see it become bolded and put an asterisk next to it also
what it will do when you do that that you're moving up and down it'll allow you to adjust the position
of one of those fields so that's very simple so you're using up and down to navigate
D or S or space to toggle a field on and off then you're going to use the right and left arrow keys
to move one of those columns around so you select it the field by pressing the right arrow key
and then you move it up and down to where you want it to be in the list of displayed values
then hit the left arrow key to set it there now of course you can move around
you can move the value around the list and between the non like if if you had all your fields
at the top the fields at the top are bolded like the first 15 bolded and then the remainder are
unbolded or not they're not active and you take one of the bolded ones and move it down below
an unactive one all it's going to do is put that that field to the end it's going to move it to
the end doesn't really impact on what fields are not displayed and how that order is unless you turn
one of those fields on before it or after it and then it will display it in those orders so it's
very simple up and down navigates this field list S space or D toggles whether the field is
displayed right arrow key selects one of the fields for moving or changing its position then up
and down again to move it where you want to and either left arrow key or enter commits that change
so when you when you're done all you have to do is hit escape or cue and you will see your changes
made in the task area of top and you'll see that that new column has been added or an existing
column has been removed or some things may have been adjusted in other locations that my friends
is the bottom of top in a nutshell a mouthful there's a lot of stuff to cover there
might have been a little dry in some respects but there's a whole lot of information
that you can garner from top and give you a snapshot of what's going on in your system remember
you can always change the refresh rate when you're in the top window by pressing the D key
and it'll change the delay and I think you do up to 10s of a second so like 3.5 we'll give you 3.5
seconds default this three pretty handy application now there's still more to talk about in top so
the next episode is going to focus on different views of top how to configure that stuff
and any other stuff that I haven't mentioned already about top we're going to wrap it up
on the next episode so I do hope that you will join me again in two weeks for the rest of top
and the meantime head on over to the website wash the video read the show entry to further
solidify this information in your mind and check out the notes if you want some further information
on any of those fields again my name is Dan Wasco you're listening to Linux in the shell hosted
by Hacker Public Radio thank you very much and have a great day
you have been listening to Hacker Public Radio at Hacker Public Radio does our
we are a community podcast network that releases shows every weekday Monday through Friday
today's show like all our shows was contributed by an HBR listener like yourself
if you ever consider recording a podcast then visit our website to find out how easy it really is
Hacker Public Radio was founded by the digital dark pound and the economical and
computer cloud HBR is funded by the binary revolution at binref.com all binref projects are
crowd-sponsored by linear pages from shared hosting to custom private clouds go to lunar pages.com
for all your hosting needs unless otherwise stasis today's show is released under a creative
commons attribution share a live video's own license